Question about 2000 Mercury Grand Marquis
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On this model you will have to open glove box and press the tabs on each side so that you can open it all the way open. You will see a 2 wire grey connector behind it.
Turn ignition switch to run postion then take a paper clip or something like that and momentarily short the 2 wires together.
The door locks should then cycle from lock to unlock.Remove the paper clip then press one of the buttons on each remote. When you press the button on the remote door locks should cycle again to confirm that it programed.Then when finished turn off the ignition switch and door locks should unlock to confirm you have exited programming mode.
Posted on Feb 20, 2009
Same problem on my 2000. Apparently moisture gets into the pad and shorts it out. The constant lock/unlock and lights flashing (also headlights comin on if you have them on automatic) will run the battery down in no time. I solved it temporarily by unplugging the keypad plug behind the door trim. That will still give you the door lock/unlock funtions from your remote. Only fix is to replace the pad.
Posted on Nov 23, 2009
Tips for a great answer:
Aug 14, 2016 | 2007 Mercury Grand Marquis LS
Apr 01, 2015 | 2008 Mercury Grand Marquis
Jul 12, 2014 | 2000 Mercury Grand Marquis
Apr 02, 2014 | 2000 Mercury Grand Marquis
Apr 05, 2010 | 2000 Mercury Grand Marquis
Feb 08, 2010 | 2001 Mercury Grand Marquis
734 people viewed this question
Usually answered in minutes!