Question about 2001 Dodge Durango

1 Answer

Low beams dont work and all other lights do. stopped by A&A auto parts and they checked my bulbs and tested the fuses. they were baffled. can you help me out?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 22,246 Answers

Not very good were they then ,but they are lowly parts men so forgive them ,change the stalk switch

Posted on Jan 03, 2011

Testimonial: "thank you very much!!!! was getting aggravated. "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beams work for both lights, 1 low beam does not


Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

1996 chevy suburban high beams work, low beams and daytime running lights don't. checked all fuses none blown, dont know how to check relays except to replace each one, one at at a time.


with a test light back probe the green wire behind the low beam then if test light on = bulb defect
the blue one is for daytime running lights example : if 1 bulb is burn or open no daytime running lights
p.s. you need to have 2 bulbs the same or it won't work

Aug 05, 2013 | 1996 GMC Suburban

1 Answer

2004 envoy xuv low beams dont work switched fuses 45 and 46 still nothing any ideas


Other possibilities are; the bulbs themselves, burnt or corroded bulb sockets, or a bad headlight selector switch.

Dec 11, 2011 | 2004 GMC Envoy

1 Answer

The low beams of my 2006 pontiac grand prix don't work only high beams work


mdsarnes, The first thing that I would check is the fuse for the low beams located in the engine compartment power distribution box. (Fuse box) GM does have a legend written right on the cover so you know which fuse to check. Also, when the low beams are on try and wiggle the connectors to each bulb. If these dont work, replace one bulb and see if it works. If it does then take the same bulb and try it on the other side. If you have a test light then you can test for power at the plugs before you purchase any bulbs. Good luck with this.

May 22, 2011 | 2006 Pontiac Grand Prix

3 Answers

I have a 2006 ford escape and the passenger head light low beam will not work. Tried replacing the bulb, and check fuses nothing is working.. what else can I try?


Both your low beam and your high beam is protected by the same fuse, so it makes sense that the fuse is OK if the high beam is working on the passenger side. There are 3 fuses for the headlamps. Fuse #13 in the Battery Junction Box (20 Amp). If this fuse is blown, the headlamp relay will not have any power and neither high nor low beam on either side will work (you will have no headlamps at all) Then there is Fuses #2 and #3 (15 Amp) in the Battery Junction Box. #2 goes to the left low and high beam and #3 goes to the right low and high beam.
The headlamp switch uses a SINGLE CIRCUIT to control BOTH sides at the same time, so if one side works, the switch cannot be the problem. The headlamp relay provides power for fuses #2 and #3 and we already ascertained that these fuses must have power since we have working lights on both sides, so the relay cannot be the problem. A replacement bulb has already been tried, so that pretty much leaves us with a bad lamp socket. (Most likely cause) or a bad connection at splice #S122, which is located in the main wiring harness near the breakout for the left headlamp. (RED/BLACK wire)

May 16, 2011 | 2003 Ford Escape

3 Answers

The low beam on my honda accord 91 dont work just the hi beam


they are fussed separately possible both low beam brunt out really

Mar 10, 2010 | Honda Accord Cars & Trucks

1 Answer

2004 malibu low beam headllights dont work but high beam do


first check fuses and relays that give low beam lamp power if all checks out ok check bulbs youshould be able to see the filliment inside the bulb if its broken replace the bulb. if bulb check ok get a test light and check for power at the wires going to the bulbs if you have ppwer with the light switch on replace bulbs. if no power to the wires going to the bulbs replace light switch.

Jan 22, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Low beams dont work. have changed light bulbs and fuses ok.


If your low beams don't work you may have to change your high beam- low beam switch. Take your vehicle to any autozone or similar auto parts store who will scan your computer which will give you all or part of the answer on how to proceed.

Oct 03, 2009 | 2005 Chevrolet TrailBlazer

2 Answers

My headlight just stopped working. One of my


dont replace the bulbs ...check the fuses first...each circuit has its own independent fuse...one for low beam one for high beam and a separate low voltage one for running lights...you may have 1 bad bulb at very worst that could have blown the fuse...why spend extra money on 2

Sep 28, 2009 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2001 Dodge Durango Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...