Question about 2007 Dodge Grand Caravan SXT Minivan

1 Answer

My bulbs blew out and they say I have to replace the entire lamp because the bulbs slightly melted a plastic plug connected to the bulb. on my dodge 2007 grand caravan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,565 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left rear tail light not working on 2001 dodge stratus


If that's the only light not working, the bulb probably needs to be replaced. To get the lamp housing out so you can change the bulb, open the trunk and pull back the liner on the left rear side - there are usually a couple of plastic fasteners that need to be removed to pull back the liner. You should now be able to see two or three fasteners (plastic or metal) that hold the lamp assembly to the body. Remove these and pull the lamp assembly out to the rear. Remove the bulb holders from the lamp assembly by twisting them a quarter turn counter clockwise, then remove and replace the non-functioning bulb. Reverse to reassemble.

Oct 08, 2016 | Dodge Cars & Trucks

1 Answer

When I run over speed bumps on my dodge1500 single cab.. My lamp out light comes on and it's been coming off and on for the past week now what seems to be the problem?


check the wiring going to the rear lights,and also..check the bulb sockets for a good connection.sometimes they overheat and the plastic from the plastic base bulbs melts. sometimes,a bulb will look ok but the filament is fractured and makes an intemittent bulb.,the fastest and cheapest solution is to change the bulbs first,then check the sockets,if still no go then check the wiring

Mar 09, 2012 | 2004 Dodge Ram 1500

1 Answer

Replace reading light bulbs in 2007 Dodge Grand Caravan SXT Minivan


My dealer says I must replace the entire assembly holding the lamps because they might cause a fire. I told them they are at fault but they won't replace it for free. The plastic that holds the bulbs is melted. I spoke to someone at Chrysler Group Headquarters and they say I must pay but I refused saying I should be able to buy 2 $3.00 bulbs and that's it. They don't agree. They won't admit to having defective parts. I am planning on calling the National Safety Council and asking for their help. If they don't help I will file a small claims court case like the lady suing Honda for not delivering on the projected mileage on the sticker for her hybrid. Anyone having this problem should coplain to Chrysler and the National Safety Council.

Jul 16, 2011 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

How do I replace the tail light assembly on a 2003 hyundai santa fe?


You'llhave to raise the rear compartment door fully. Next locat the tailight you wish to replace or same if you are replacing one of the tailigt bulbs. This would include the stop bulb or turn signals etc.
Next there is a black plastice side panel located between the lamp assembly (the entire plastic housing) and the inner portion of the rear compartment door. There you'll see two phillips head screws which you must remove. This releases the entire assembly.
You then next gently give it a small tug toward the left (if a left side assembly) or to the right if other wise. What happens there is that there is a stud that's held pretty snuggly by a modled ring in the body assembly. Don't twist the lamp assembly up or down unless you want to break this off but give it a slight pull outward. Then you're done. The entire assembly will be released and you'll be home free for changing any of the bulbs or even replacing the entire assembly. W/o breaking it of course.

Jul 15, 2010 | 2003 Hyundai Santa Fe

1 Answer

How do I replace the headlight bulb on a 2000 Ford Escort ZX2?


² Coupe
² Sedan/wagon
2. Open the hood and disconnect the headlamp wiring socket from the
in-line connector. This will make it easier to change the bulb.
3. Remove the protective dust shield
from the housing by turning the
dust shield counterclockwise (when
viewed from the rear).
4. Release clip and disconnect the electrical connector from the bulb.
5. Remove the bulb retaining ring by
rotating it counterclockwise.
6. Without turning, remove the old
bulb from the lamp assembly by
pulling it straight back out of the
lamp assembly and replace.
7. Install the new bulb in lamp assembly by pushing straight in with the
bulb’s plastic base facing upward. Turn the bulb slightly to align the
grooves in the plastic base with the tabs in the lamp assembly.
8. Install the bulb retaining ring over the plastic base and lock the ring
by rotating it clockwise until it snaps into place.
9. Connect the electrical connector into the plastic base until it “snaps”.
10. Install the protective dust shield and lock the shield by rotating it
clockwise until it locks into position.
11. Connect the headlamp wiring socket to the in-line connector.
12. Turn the headlamps on and make sure they work properly. If the
headlamp was correctly aligned before you changed the bulb, you should
not need to align it again.
__________

Feb 03, 2010 | 2000 Ford Escort

1 Answer

Trying to replace the tail lamps on a 2001 Dodge Ram Van 1500 (third tail lamp that is above the back doors). Unscrewed the 2 screws & the plastic housing has the 2 bulbs that I need to replace, but...


Have you checked under your headliner inside the cab? Most of the wiring for the 3rd brakelight is ran under the headliner. There should be a connection you can disconnect and remove the light to replace the bulbs.

Jun 30, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

The right ''driving'' lamp burned out. How do I replace it?


LOOK INSIDE THE ENGINE BAY BEHIND THE HEADLIGHT, THERE IS MOST PROBABLY A RUBBER COVER WITH THE LIGHT WIRES GOING INTO IT, THERE WILL BE A PLASTIC PLUG WHICH THOSE WIRES CONNECT TO AND THE PLUG THEN IS CONNECTED TO THE HALOGEN LIGHT BULB.
REMOVE THE PLUG AND THE RUBBER COVER WHICH WILL EXPOSE THE REAR OF THE LIGHT, YOU MAY NOTICE THE 3 PRONGS AT THE REAR OF THE HALOGEN BULB, THERE ARE 2 SPRING TYPE WIRES THAT YOU HAVE TO PRESS DOWN AND PULL TOWARDS THE CENTRE TO ALLOW IT TO BE REMOVED, ONCE THEY ARE LOOSENED YOU SHOULD BE ABLE TO REMOVE THE BULB AND REPLACE IT WITH THE NEW ONE BUT DO NOT TOUCH THE NEW BULB WITH YOUR FINGERS AS THE BULB MAY BLOW WHEN YOU TURN THE LIGHTS ON
CHECK THE WATTS ON THE SIDE OF THE OLD BULB AND MAKE SURE THE NEW BULB HAS THE SAME WATTS
REPLACE IN REVERSE ORDER TO REMOVAL

Jun 06, 2009 | 2005 Audi A6

1 Answer

Lamp out alarm keeps sounding


probably one of the tabs on a light bulb heated up and melted, causes contact to be lost.just remove lights and check each bulb for oblivious melting and bend contact out,away from plastic on the bulb to get a better contact on the inside of the socket. happened too me in the rear tailights.

Mar 01, 2009 | 2002 Dodge Ram 3500 Truck

1 Answer

High break light out/2006 sonata


hi from uk if lamp is at top of rear screen ? the plastic cover is a pull off cover at right angle to screen by pulling each end of cover it is stiff but does clip off you will then see how/what the clips fit onto ? the bulb is what is known as a capless fit and is push in fit to the bulb holder to remove holder turn anti clockwise slightly and it will come out be sre to fit correct bulb ! no other type? the bulb is 12 volt/18watt/capless fitting can be obtained from most auto superstores /halfords etc if yo fit higher watt bulb ? it will heat/melt the lens re assemble is reverse proceedure hope this is of help ?

Jan 30, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
2007 Dodge Grand Caravan SXT Minivan Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...