Question about 1995 Geo Tracker

1 Answer

I havea 1995 geo tracker and one day i was letting it idle turned itoff for about 10 mins and went to start it up but it would not start. It is cranking but not firing. I had checked the fuses none was blown in any spot. I checked the coil was not it. I tried the distributor was not it. I sprayed some starting fluid in the throttle body still did not want to start. I checked the spark and there was no spark. So im clueless at this point as to what it may be. SO my question is wht do i do at this point?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

If you are not getting spark, I'd replace the pick up coil in the distributor-when you remove the distributor cap it is under the rotor, just lifts off and unplugs at the harness.

Posted on Jan 03, 2011

  • kick-fix Jan 29, 2011

    solution1 is geussing.
    the ECU will tell you when the CMP is dead. free page, all you need is there. up to 1998

    see my no start for dummies.
    i promise the answer is there.
    but first see if cam is spinning by looking down oil fill hole cranking.
    if not you skipped the Timing belt change out at 60k,120k.
    right , i bet you did.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1995 geo tracker has flashing red light on dash and wont start

The flashing red light is usually an alarm system indicator. It may be an aftermarket product.

Jul 24, 2012 | 1995 Geo Tracker

1 Answer

1995 geo tracker .. when start the truck it idles at 3000 rpm and when shifting between gears it idles high at 3000 rpm .. it randomly started this but i also noticed when it started doing that my lighter...

I doubt it has anything to do with your lighter/aux, but change the fuse on it and see if that corrects the problem. Check to see if you can pull the gas pedal back with your hand and see if that lowers the RPM. Old cars can wear the parts that make your pedal rise fully back up.
There is also the intake adjustment screw near where your intake meets the manifold. It's usually a phillip's screw. This will lower or raise your RPM levels on idle. You may have to adjust the screw. Every time you make 1/4 turn adjustments, you need to let the car run for awhile as the process is gradual and NOT immediate. This is the steps I would take because I know my cars, but if you feel uncertain, please take it to a mechanic. Best of Luck!

Feb 17, 2011 | 1995 Geo Tracker

1 Answer

Just did a top end new valve seals head gasket laped the valve seats went back togather with it timing marks lined up it wont fire realy confused want to know if 1995 Geo Tracker needs the alternator or...

no u dont need them hookd up to run u do need to see if ur getting inch to inch half spark if ok check vakve movment see if to tight and lifters not pumping up and if all else fails new plugs cut the fuel if dont start call me im at my shop 6 days a week i just done same to one was kinda stuborn on start p 8016865205

Oct 26, 2010 | 1995 Geo Tracker

1 Answer

I need to know witch tining marks do i line up with the timing mark on a 95 tracker the I or E on the cam shaft

Click on the following free, direct Link. It has the Timing + Marks: Belt Diagrams, including for your 1995 Geo Tacker, 1.6L SOHC 4-Cylinder.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Apr 19, 2010 | 1995 Geo Tracker

1 Answer

How to replace oil pan on a 1995 geo tracker 4 wheel drive

1 Raise and support
2 Remove front diff assembly from chassis
3 Drain oil
4 Remove clutch or torque converter housing lower plate
5 Remove oil pan

OIL PAN BOLTS 6.7 - 8.9

Mar 11, 2010 | 1995 Geo Tracker

1 Answer

1995 Tracker, after clutch cable replacement - won't start

check and replace the negative battery to the engine, the starter is grounding through the clutch cable, very common.

May 07, 2009 | 1995 Geo Tracker

2 Answers

1993 geo tracker engine idels high all the time

you need to post
or 16valve motor

they can be either.

but there are 50 things that can kill idle.
air leaks
ISC valve stuck
ignition timing too far advanced a idle.
and many more
tell more , get more.

Feb 18, 2009 | 1993 Geo Tracker

1 Answer

1990 Geo Tracker 5sp Stick

15 amp fuse in fuse box under the the drivers left leg.

Sep 08, 2008 | 1992 Geo Tracker

Not finding what you are looking for?
1995 Geo Tracker Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides