Question about 1999 Lexus RX 300

2 Answers

Where do I find the o2 sensor , bank one - 1999 Lexus RX 300

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

Well a good rule to know is that all (bank 1) sensors are (befor) the catylic converter, usually in the exhaust manifold, of just after it exits the engine.
all (bank 2) sensors will be located on the catylic converter or just after it. these sensors are used to determin the fuel burning efficiency of the engine, and the computer will use these readings to either give the engine more fuel (en-rich), or take fuel away (lean). if all these sensors are bad it will cause the computer to use a default value to keep the engine running, and use more fuel over the long haul. but none of these will keep it from starting or even running. hope this helps you.

Posted on Jan 03, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bank 1 and Bank 2 refer to the 1_3_5 cylinders or the 2_4_6 cylinders of the V6 engine; theyre both pre-cat sensors. There is another sensor post-catalytic converter that tells you how well the cat is working.

Posted on Jun 08, 2011

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: location of bank 1 sensor 1 o2 sensor

Should be in the manifold on the back side closest to the firewall.

Posted on May 04, 2009

johnny5846
  • 379 Answers

SOURCE: location of a o2 sensor 2001 nissan maxima

bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .

http://www.autozone.com/N,26200242/shopping/specsSelect.htm



Posted on Jan 04, 2009

ewashmidas
  • 362 Answers

SOURCE: o2 sensor bank 2 sensor 2

Bank 2 will the the passenger side or right side and sensor 2 is the O2 sensor behind the catalytic converter.

Posted on Jan 28, 2009

bschilz
  • 2049 Answers

SOURCE: location of the bank 1 sensor 2 O2 sensor on a 2001 ford escape

B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter

You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks

7acfed1.gif
d9eb1af.gif

Posted on Oct 20, 2009

  • 7353 Answers

SOURCE: have p0130 and p0133 codes 98 toyota tacoma

I would check the O2 sensor, and if it checks bad, replace it, and clear the trouble codes. If the light comes back on, you may need to check further. .

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1087 diag code for 2011 BMW 328i


P1087 BMW - O2 Sensor Circuit Slow Response in Lean Control Range Bank 1 Sensor 1
Possible causes
- Faulty O2 Sensor Bank 1 Sensor 1
- O2 Sensor Bank 1 Sensor 1 harness is open or shorted
- O2 Sensor Bank 1 Sensor 1 circuit poor electrical connection


Read more: http://engine-codes.com/p1087_bmw.html#ixzz3AD8uz7pb

Ford OEM Motorcraft parts and vanity license plates

Aug 03, 2014 | 2001 Ford Taurus

1 Answer

What is a bank sensor for a honda civic ls 04


O2 sensor bank 1 sensor 1 should actually be read as: O2 sensor, bank 1, sensor 1. Meaning the first oxygen sensor (O2 sensor #1) on cylinder bank #1 (it's a Honda inline 4 -cylinder engine, so it only has one bank of cylinders; a V6 or V8 engine would have tow banks arranged in a V shape) needs to be replaced. The oxygen sensor will be threaded into the exhaust near where the manifold (or possibly threaded in at the manifold itself) with some wires coming out of it. In the photo, the O2 sensor is labelled as the air/fuel ratio sensor. 5478b94e-7fcc-4726-9bba-653a172e5a92.jpg

Jun 23, 2014 | 2000 Nissan Frontier

2 Answers

Trouble code p0134, p0135 p0053 p0030


P0134 - O2 Sensor Circuit No Activity Detected Sensor 1 Bank 1
P0135 - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1
P0053 - O2 Heater Resistance Bank 1 Sensor 1
P0030 - O2 Heater Control Circuit Bank 1 Sensor 1
You need to replace the O2 Sensor Bank 1 Sensor 1
Carquest can help you get the correct part and help you locate it.

Apr 01, 2014 | 2006 GMC Envoy Xl

2 Answers

I have research around and found that the Bank 1 sensor 3 O2 sensor is post Cat. But when I got under there I dont see anything that could resemble a sensor. Where is it. Please help. Marc


try this
ALLDATA Editor's Note: Always verify #1 cylinder location prior to diagnosis and repair.

- Cylinder bank number one is the bank that contains number one cylinder.


See: Firing Order


printer.png View & Print Options 80_fm96hmob2_006a-159za.png&width=490&height=209&displaytype=display&imgrotation=&links=
Cylinder #1 on left side.

printer.png View & Print Options 29_fm96hmob2_006a-159z.png&width=469&height=193&displaytype=display&imgrotation=&links=
Cylinder #1 on right side.

- The first oxygen sensor in cylinder bank # 1 is numbered O2 Sensor 1/1.
- The second oxygen sensor in cylinder bank # 1 is numbered O2 Sensor 1/2.
- A third oxygen sensor in cylinder bank # 1 would be numbered O2 Sensor 1/3.
- The first oxygen sensor in cylinder bank # 2 is numbered O2 Sensor 2/1.
- The second oxygen sensor in cylinder bank # 2 is numbered O2 Sensor 1/1.



- If a V-6 or V-8 vehicle only uses one downstream Heated Oxygen Sensor (HO2S) it is numbered O2 Sensor 1/2, even if it uses two upstream HO2S.
var classElements = new Array(); var node = document; var tag = 'a'; var els = node.getElementsByTagName(tag); var elsLen = els.length; var pattern = new RegExp("(^'\\s)specs_note(\\s'$)"); for (i = 0, j = 0; i

Jun 03, 2011 | 2001 Dodge Stratus

2 Answers

Bank 1 sensor 2 location on a 1996 chevy suburban


zjlimited_210.jpg

Fig. Fig. 3: Oxygen sensor-4.3L engines


zjlimited_211.jpg


Fig. Fig. 4: Oxygen sensor-5.0L and 5.7L engines





zjlimited_212.jpg



Fig. Fig. 5: Oxygen sensor-7.4L engines




Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

Some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (the one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Hope helps (remember to rate this).



Dec 12, 2010 | Chevrolet Suburban Cars & Trucks

1 Answer

Hur byter jag växellädsolja på


160....O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)

P0161....O2 Sensor Heater Circuit (Bank 2 Sensor 2)

P0162....O2 Sensor Circuit Malfunction (Bank 2 Sensor 3)

P0163....O2 Sensor Circuit Low Voltage (Bank 2 Sensor 3)

P0164....O2 Sensor Circuit High Voltage (Bank 2 Sensor 3)

P0165....O2 Sensor Circuit Slow Response (Bank 2 Sensor 3)

P0166....O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 3)

P0167....O2 Sensor Heater Circuit (Bank 2 Sensor 3)

P0168....Fuel Temperature Too High

P0169....Incorrect Fuel Composition

P0170....Fuel Trim (Bank 1)

P0171....System too Lean (Bank 1)

P0172....System too Rich (Bank 1)

P0173....Fuel Trim Malfunction (Bank 2)

P0174....System too Lean (Bank 2)

P0175....System too Rich (Bank 2)

P0176....Fuel Composition Sensor Circuit

P0177....Fuel Composition Sensor Circuit Range/Performance

P0178....Fuel Composition Sensor Circuit Low Input

P0179....Fuel Composition Sensor Circuit High Input

P0180....Fuel Temperature Sensor A Circuit

P0181....Fuel Temperature Sensor A Circuit Range/Performance

P0182....Fuel Temperature Sensor A Circuit Low Input

P0183....Fuel Temperature Sensor A Circuit High Input

P0184....Fuel Temperature Sensor A Circuit Intermittent

P0185....Fuel Temperature Sensor B Circuit

P0186....Fuel Temperature Sensor B Circuit Range/Performance

P0187....Fuel Temperature Sensor B Circuit Low Input

P0188....Fuel Temperature Sensor B Circuit High Input

P0189....Fuel Temperature Sensor B Circuit Intermittent

P0190....Fuel Rail Pressure Sensor Circuit

P0191....Fuel Rail Pressure Sensor Circuit Range/Performance

P0192....Fuel Rail Pressure Sensor Circuit Low In put

P0193....Fuel Rail Pressure Sensor Circuit High Input

P0194....Fuel Rail Pressure Sensor Circuit Intermittent

P0195....Engine Oil Temperature Sensor

P0196....Engine Oil Temperature Sensor Range/Performance

Nov 20, 2010 | 2004 Volvo S80

2 Answers

I need to know which is the bank 1 02 sensor


Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2

Some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2

Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.

Sensor 1 is always the upstream sensor (The one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.

Hope helps (remember to rate this).

Oct 20, 2010 | Ford Explorer Cars & Trucks

3 Answers

Reccieved P0141, P0147, P0340 as emission diagnostic trouble codes. What do these mean?


P0141....O2 Sensor Heater Circuit (Bank 1 Sensor 2)

P0142....O2 Sensor Circuit Malfunction (Bank 1 Sensor 3)

P0143....O2 Sensor Circuit Low Voltage (Bank 1 Sensor 3)

P0144....O2 Sensor Circuit High Voltage (Bank 1 Sensor 3)

P0145....O2 Sensor Circuit Slow Response (Bank 1 Sensor 3)

P0146....O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 3)

P0147....O2 Sensor Heater Circuit (Bank 1 Sensor 3)

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

Sep 20, 2010 | 1997 GMC Sierra

1 Answer

2006 hundai elantra P2270 code. If this is an O2 sensor, which one?


Possible O2 sensors:

P2270 O2 Sensor Signal Stuck Lean Bank 1 Sensor 2
P2271 O2 Sensor Signal Stuck Rich Bank 1 Sensor 2
P2272 O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
P2273 O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2274 O2 Sensor Signal Stuck Lean Bank 1 Sensor 3
P2275 O2 Sensor Signal Stuck Rich Bank 1 Sensor 3
P2276 O2 Sensor Signal Stuck Lean Bank 2 Sensor 3
P2277 O2 Sensor Signal Stuck Rich Bank 2 Sensor 3
P2278 O2 Sensor Signals Swapped Bank 1 Sensor 3 / Bank 2 Sensor 3
---
This is Bank 1 (closer to the dash panel) Sensor 2 (located after the catalytic converter).

---
Note: A malfunctioning front oxygen sensor may cause fuel trim codes to set.
  1. Several Diagnostic Trouble Codes use specific terminology to refer to sensor location. The illustration and key below explain the following terms:
  2. Engine BANK Bank 1 is closer to the dash panel, (also referred to as RH or right hand). Bank 2 is closer to the radiator, (also referred to as LH or left hand).
  3. UP Refers to Sensor 1 or "front sensor". It is located closer to the exhaust manifold and before the catalytic converter.
  4. DOWN Refers to Sensor 2 or "rear sensor." It is located after the catalytic converter.
  5. The following examples show how to interpret oxygen sensor terminology:
  6. B1/S1 = Bank 1/Sensor 1 = Dash panel side, BEFORE the catalyst or "upstream"
  7. B2/S2 = Bank 2/Sensor 2 = Radiator side, AFTER the catalyst or "downstream"

Aug 06, 2010 | Hyundai Elantra Cars & Trucks

Not finding what you are looking for?
1999 Lexus RX 300 Logo

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...