Question about 1999 Chevrolet Express

1 Answer

How too remove door panel and window crank handle on driver side on 2001 chevy van

Posted by Anonymous on

  • Anonymous Mar 28, 2014

    THe window crank handel does not have a clip

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

On that model of van, you will have to remove the screws on the lower side of the panel, and in the door handle. The window crank handle has a spring clip in it that takes a special tool that is available at any parts store, but very easy to use (you just slide it up and down inside of the handle a few times, and it should pop off). After you have the screws, and handle off, you will need to "pop" the panel loose from the door. whille pulling on the sides of the panel, look inside of the panel to see if you can locate the pop in fasteners. When located, you'll have to have a screw driver, or similar object to pry the panel off of the door. (some of the fasteners might break, but are available at the part store) After the panel is loose, be careful of the door release handle, and with the window in the down position, take all of the switches loose from the panel and carefully raise the panel up and out.I hope that this is helpfull.

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove drivers side door panel for outside handle replacement


remove inner handle and window crank if manual operated the witha small pry bar unclip the bottom and both sides lift the panel carefullt till you can disconnect any wiring then by golly you should see the screws for the handle

Mar 23, 2015 | 2001 Honda Passport

2 Answers

How to remove door panel with a manual window


screws in the armrest, clip on window crank, screw behind door handle and possible a screw behind a plug that is located to the inner or outer pane, then with a flat tip screwdriver gently pry around the outside of the panel then lift panel up and out. Good Luck Tim

May 22, 2011 | 2001 Dodge Dakota

1 Answer

I recently purchased a used 03 Chevy Venture van. The passenger sliding door doesn't open. It worked for 1 week and stopped. The driver side sliding door has a broken handle so I'm able to open that door...


Pain but fixable. Sounds like the linkage is not connected. Even a mechanic will have to remove the door panel and fight with it. If you can remove the rear seat from the drivers side side door then you might have room to remove the passenger side door panel to fix it. Usually clips are the first thing to break on door handle/latch linkages

Apr 06, 2010 | 2003 Chevrolet Venture Passanger

1 Answer

How do I replace the driver's side door handle on a 2001 Chevy Tracker 4 door


Interior or exterior handle? Remove the door panel first. They make a special tool for removing the window crank, but usually you can get it off with a screwdriver. There is a little clip under the crank that needs to be removed first. Then remove the door handle itself, this has a screw in it. Then pull the panel off. With the window in the fully down position or the up position you should be able to get to the handle itself for the exterior. If it's an interior handle just remove that without taking the door handle off. This is all pretty self explanatory once you see it.

Dec 15, 2009 | 2001 Chevrolet Tracker

1 Answer

How do you remove the drivers side door panel (having a crank window) once all the perimiter screws are removed?


Remove the screws behind the pull handle. Remove the clip behind the window crank . Panel should gently be pulled off door.

Nov 02, 2009 | 2001 Ford Focus

1 Answer

How do you remove the rear side door panel to


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Oct 19, 2009 | 2001 GMC Savana

1 Answer

Cant get rollup window handle off.


If there is no bolt behind the center of the crank, then there is a u shaped clip holding it on. You will need to push in on the door panel to see it. You should be able to remove it with needle nose pliers, or a pick.

Jun 09, 2009 | 2001 Chevrolet S-10

1 Answer

Avalon door panel


Below are the removal procedures for your vehicle's front inner door panel.


On models without power windows, remove the snap ring retaining window crank handle. Remove crank handle and cover plate.
Remove lower door frame bracket garnish. Using a screwdriver, remove inside door handle bezel. Remove power mirror control switch and disconnect harness connector.
Remove armrest panel. Remove 6 screws. Pry interior door panel loose from door.

May 23, 2009 | 2001 Toyota Avalon

2 Answers

Remove door panel on a Ford Van


For a 1999 Ford Econoline 150 (assume the same or very similar), remove triangular plastic cover over mirror assembly by prying straight out, remove plastic door handle cover by prying up from the front side, remove electronic door switches by prying up from back side, remove round plastic cover at bottom rear of door panel. Four screws are now revealed, remove them. Lift door panel straight up, clips are hooks (not snap in). Work door switch assembly out of door panel. Set door panel aside. Reassemble in reverse order.

May 09, 2009 | 2000 Ford Econoline

Not finding what you are looking for?
1999 Chevrolet Express Logo

788 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...