Question about 1995 Buick Skylark

1 Answer

I need to take off the belt how do i take it off a 1991 buick skylark?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

You will have to loosen tentioner to get belt off of all pulleys. Then you need to jack up engine or pick up engine with a lift of some kind, just enough to hold engine in place while you remove upper engine mount, this has to be done so as to slip belt past mount and off engine. Then put new belt in position and bolt mount back in place. Release jack or lift. I usually put belt back on everything but alternator, pull on tensioner and roll back over alternator. This is on a 3100 engine, or 3.1 liter.

good luck

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the motor from a 1991 buick lesabre drop into a 1991 buick skylark with no problems


You will run into an issue from the VATS antitheft system of the LeSabre, not working with the key/ignition of the Skylark

Security Help

Dec 31, 2013 | 1991 Buick LeSabre

1 Answer

How do I install a serpentine belt on 97 buick skylark? Do I remove motor mount?


Hello
Yes remove the motor mount.You need to have it supported with a floor jack first.

Here is a step by step link to help guide you.

Good luck
http://www.wikihow.com/Change-a-Serpentine-Belt-on-a-1997-Buick-Skylark

Dec 08, 2010 | 1997 Buick Skylark

1 Answer

W here is the fuse panel on the 1991 buick skylark


look under the dash by the driver's knee for this cover that says FUSES. If yours isn't like this or you have more questions, please get back to me.

jturcotte_355.gif

Dec 01, 2010 | 1991 Buick Skylark

1 Answer

My 91 buick skylark will run for a short distance


may be the converter on the exhaust has busted and is constricting the exhaust

Jul 23, 2010 | 1991 Buick Skylark

1 Answer

Firing order diagram of a 1991 buick skylark 3.3liter


Here is the firing order diagram for that vehicle.


d539dc3.jpg

Jun 28, 2010 | 1991 Buick Skylark

1 Answer

My 91 buick skylark won't start. The battery is


More Information pleas, but I think it might be the neutral safety switch. Try starting the car in Neutral and see if it starts, if it does you need to have the NSS, replaced.

Jun 21, 2009 | 1991 Buick Skylark

1 Answer

I have a buick skylark 1991 fi it will start and


you have a shorted fuel injector that is taking out the quad driver in the computer that is why i said did you ohm the injectors it should be 4.1 to 4.3 ohms per side anything less will shut off the quad driver in the computer. each individual injector should be 12 ohms

Mar 04, 2009 | 1990 Buick Skylark

Not finding what you are looking for?
1995 Buick Skylark Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...