Question about Daewoo Nubira

Open Question

P0337,P0341,P0342 ON A 2001 NUBIRA WITH 2.0L DOHC

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Were in car is p0341 andp0342

Both codes are for a problem with the cam sensor. The sensor and circuit would need to be tested.

Dec 06, 2012 | 2002 Daewoo Nubira

2 Answers

Nubira 1999 wagon 1.6 ltr ... firing order request.. its not 1342 . can you help

The firing order is 1342. Be sure you have the wires on the distributor cap correctly and that the wire are on the correct spark plugs. #1 cylinder is on the right side of the vehicle. It would be on your left if standing in front of the car.

Sep 02, 2011 | 1999 Daewoo Nubira

1 Answer

Do oxygen sensors's and canshaft position sensors go out a lot? I have trouble code P0134,P0341 and P0342

Oxygen sensor can give trouble because of many factors, but usually they get faulty at certain mileage, as to camshaft position sensor this can have only few problems: one is when the belt jumps a tooth, another when the wiring gets loose, and final if the sensor reaches its operational mileage.

Oct 30, 2010 | 2002 Daewoo Nubira

1 Answer

Need firing order for 1999 deawoo nubira

1999 Daewoo Nubira 2.0 liter DOHC L4 D-TEC


Hope this helps (remember to rate and comment this).

Sep 30, 2010 | 1999 Daewoo Nubira

1 Answer

Whats the fireing order for a daewoo nubira 1999 and from the back of the flywall to the front on the coil

The firing order for a 2.0L DOHC 4 1-3-4-2...........

Use diagram below to determine location of 1-4 cylinders.....

1 - 2 - 3 - 4

Front of Engine

Sep 22, 2010 | 1999 Daewoo Nubira

1 Answer

I did a check engine light test at auto zone and know have a list of 6 trouble codes they are as follows p0705, p0741, p0342, p0341, p0700 and p 0499 anyone please help me

with this many codes there is no way this car is not going to end up in the shop. From what I see you either have a failed computer or a internal transmission issue or wiring issues. Without a data scanner do see all your sensors there will be no way to even begin. Aboyt

Aug 03, 2010 | 2002 Daewoo Nubira

1 Answer

What are the specs on head bolts

2001 Daewoo Nubira 2.0L MFI DOHC 4cyl

The Head Bolt Torque ...

Torque sequence ------------------------- Front | 10 6 2 3 7 | of | 9 5 1 4 8 | Engine --------------------------

Step 1 - Torque to 18 ft/lbs Steps 2 - Turn 90 degrees Steps 3 - turn 90 degrees Steps 4 - turn 90 degrees Recheck final torque in sequence

Hope helps (remember rated and comment this).

May 27, 2010 | 2001 Daewoo Nubira

3 Answers

Need cam torque specs

1999 to 2002 - 2.0L DOHC

Camshaft bearing cap bolts intake and exhaust.

8 ( 71 )

Jan 23, 2010 | 2001 Daewoo Nubira

2 Answers

Torque specifications cylinders head bolts

for 1.5/1.6L DOHC, 18 Ft-lbs + 70deg + 70deg + 50deg

for 1.8/2.0L DOHC, 18Ft-lbs +90deg + 90deg +90deg

Jun 09, 2009 | 2001 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76673 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides