Question about 1994 Ford Explorer Limited

1 Answer

1994 explorer limited 1) left rear drivers brake line leaking out of sight up high by wheel well and gas tank any pics or diagrams of what the lines look like there(where they connect,bend etc...2) It has a bumper hitch ball tongue capacity 500 lbs. and 5000 max. weight.What rating is that class II,III or IV? Can a car dolly be attached to tow a light car 3000 lbs. or under.I'm thinking of buying this SUV but worry what's involved in replacing the lft. rear brake line.THANX

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

If it's a rusty brake line that's leaking you'd best replace the whole brake line system (all 4 wheels) for your safety. Fuel lines have the same problem. These are made out of steel and rust fast due
to calcium chloride used on the roads in winter.
Unless you're familiar with routing and installing connectors on these lines I suggest you let a pro do the job. It ain't as easy as it looks.

Posted on Jan 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake diagram


DANGER ! DO NOT DRIVE IT !!!!

cause by:
1: breach in system, see DOT3/4 fluid on pavement or on fire wall
next to MC? front and Rear !!! on inside of tire walls?
2: MC end of lie.
got ABS , you did not say.
my guess, not , it started in 1996, but some cars 91.(have one)

3: air in the system. end to end.
usually caused by removing parts, and not bleeding system

MC = master cyclinder the pedal connects to.

Oct 12, 2013 | 1994 Ford Explorer Limited

1 Answer

1994 buick century brakes went out fluid leaking from rear


Brake lines by rear door on drivers side are a common failure point. lines under door failing can cause a total brake failure. Just replace and bleed the lines.

May 31, 2012 | 1994 Buick Century

1 Answer

My brakes are leaking in the rear driver side need a diagram of brake lines to folllow.


Follow the brake line starting at the left rear wheel, there is no diagram for brake lines, take the tire off and inspect (look) left rear wheel, It will be wet where the leak is, if the inside of the tire is wet then you might want to check the brake cylinder, behind the brake drum. You might want to take it to a shop and get it fixed, It is your life and others, if you can't stop.

Aug 05, 2011 | Ford Taurus Cars & Trucks

1 Answer

NO. NEED A PICTURE REAR BRAKE LINE ABOVE WHEEL WELL AND GAS TANK.


Hello, here's the deal with that brake line. Most of the line is wrapped in a steel spring from about 5-6 inches from the rear bake hose till around the transfer case and then it starts back up again and runs all the way up to the ABS Hydralic Control Unit. What you need to do is forget the original line. It is fastened to the left side of the frame and pinched in very tight in several areas that your not going to get it out. What you should do is get a roll of 3/16 polycoated brake line with US threads. Run that from the HCU to your left rear brake hose. It will tread right into the brake hose, but I am not sure about the HCU. Ford has a tendency of using metric fitings on the stuff up front and standard for all the other fittings. I would also get a new hose for the rear because it will probably break when you try to get the line off. This is what I did with mine. I cut the brake line with snips right about the hose connector. Then I bent the metal bracket that holds the hose to the chassis down. This allowed me to get the hose off of the bracket easier. You can always bend it back up when your done. If you change the hose, you might want to consider getting new nuts or even new lines for the rear wheels. Brake lines seem easy when you start it. But they always tend to need more then think when you start out. Oh yeah, and before you run that brake line along and though the chassis. Wrap the end with electrical tape to keep all the rust and mud out of the line. I hope this helps.

Feb 19, 2011 | 1994 Ford Explorer Limited

1 Answer

1994 explorer limited Leaking brake line left rear wheel out of sight up behind wheel well and gas tank.Need diagram or pic to see what to replace.Also bumper hitch has a 500lb. tongue weight w/max. lbs of...


The easyest way to replace the brake line in this spot is to find a good place in front of the tank and fish a new line up through the frame, then join it front & rear into the system where you have room to work.
As far as the towing, you should see what the maximum rateing of the truck is, also you should check the other brake lines for corrosion. good luck.

Jan 03, 2011 | 1994 Ford Explorer Limited

2 Answers

Leaking brake fluid from rear driver side brake lines,need a diagram of how to replace the lines. 1994 ford taurus 3.o v6.thanks


They don't make diagrams for brake lines. The lines are sold in bulk. You need to measure and duplicate the bends in the orignal lines and cut/flare the lines yourself. You will need a tubing cutter, flare tool and tubing bender.

Feb 27, 2010 | 1994 Ford Taurus

1 Answer

Brake line is leaking in the left rear of my 94 grand am. cant seem to follow line up to abs system. dont want to cut the wrong line. how do i know what line to replace going into abs.


your lines are in a 5 groove holder plastic clip on the drivers side by the back door,if you could have use of a lift it is visible to follow it from the left wheel cylinder around the gas tank.

Nov 14, 2009 | 1994 Pontiac Grand Am

2 Answers

Looking for a diagram for ford explorer brakes


I'm not sure what you are looking for. Are you looking for brake line diagram? Diagram of brake assemblies? Vacumm diagram? Here's a couple, if they don't help, let me know exactly what you need.

vacuumlinerouting.png
abs.jpg

Jan 11, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1994 Ford Explorer Limited Logo

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...