Question about 1992 Daihatsu Charade
The car seems to run fine, although it is occasionally a little "lumpy" at low revs. When it stops, such as at junctions, the revs can suddnly drop and it cuts out.
It has just been serviced, but this hasn't rectified the problem. The mechanic couldn't find anything wrong (the symptoms were described to him). It had a new air filter during the service.
Get your mechanic to change the heat sensor which regulates the amount of fuel being sent to the motor. There are not very many mechanics who will find this problem, we found it by going back to the manufacturer. This solved the problem completely.
Posted on Jan 24, 2009
Check for electrical system, cracks inside distributor cap, bad spark plug cables
Posted on Oct 15, 2008
Check you've new plugs and no splits in your leads. Also make sure that you're getting enough output from your alternator. Rendell80
Posted on Sep 06, 2008
It sounds like you both have a vacuum leak or a fuel volume problem. The O2 sensor should be monitored during a test drive to confirm this. You can use a propane enrichment unit to pinpoint a vacuum leak if this is the concern. Both of these tests are above the average do it yourself-er, so if you want the info., I will do my best to explain it but I suggest a technician that does smog testing and/or drive-ability concerns regularly.
Posted on Aug 31, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 02, 2013 | 2003 Nissan Pathfinder
Sep 29, 2017 | 2007 Ford Edge SEL Plus
Nov 05, 2010 | 1996 Oldsmobile Cutlass Ciera
Jan 25, 2010 | 1999 BMW 318 ti
Nov 29, 2009 | 1998 Land Rover Range Rover
Feb 09, 2009 | 1999 Volkswagen Golf
Feb 09, 2009 | 1999 Suzuki Vitara
Oct 26, 2017 | 2001 Chrysler Voyager
Aug 04, 2008 | 2001 BMW Z3
209 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: