Question about 1994 Pontiac Grand Am

1 Answer

Power steering lin

I have 94 grand am i need to chang power steering lin how can i get to the bottem is it hard whats the best way the lin from the pump no prablem its where the end.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Ok, thios is a dirty job right off the bat. you are going to have to work in tight places with your hands. I cannot remember which hose is which, but there is a easy way to findout, do the connections at the pump have clamps and the othter have fittins that require a wrench that is spefically desin to remove High pressure line.
Ok, if it is the hose with the clamps on it, that is the return hose. place a large container undxer neath the vechile and under the genearl area below the pump assembly. the upper hose clamp is usally easy, but the lower one might require alot of finesse and swearing(optional). if you have not been able to remove that lower hose on the p/s pump, get a woman in there and you take a powder, girly man. before he leaves, ask him to point out the lower clamp and then leave, change you cloths into that pink dress and say goodbye, you pansy. hey ladies I am on your side, I am capable of working side by side with the ladies. if I remember to open a business, NO GUYS ALOWED well only if you have instrutual ideas, if not HIT THE ROAD JACK,........I got work to do so get out of my way ! you go and get it girl !!!!!!
the ladies are smarter,better hand eye co-ordination and they bring in new ideas instead of the same old **** just revised. Wake up guys it is thier turn, we frigged it up, the ladies come in and try thier hand at this pithetical world we have now. Nothing against Obama, I am proud and very happy that a fine gentleman of african desent, showing the world that anyone can over see the regular **** and start a new vision the world what you can do., but be on how we should live around the world. Congrats President Obama, show the world that you can do change our world for the better. may you rule for along time, and chose the best path for all of us to follow, :)
Ok, enough of that sucky ****, I hoped this helped you out and good luck. Roy

Posted on Nov 24, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

94 Camry steering hard to turn like it has no power steering. It has the rack replaced and steering knuckle replaced

Does the power steering have fluid in it. Is the belt on the pump. With it running take the cap off of the pump and see if fluid is moving around. If u feel the steering knucle is to tight u can also take the tie rod off and see if it turns free. Also go back to who fixed it and say its not right, Make it right. Most garages give 12 month or 12.000 mile warranty.

Jun 14, 2012 | 1998 Toyota Camry

1 Answer

1997 Jeep grand Cherokee limited 5.2l to fix very stiff steering. I have changed the power steering pump already an it is still hard to turn my wheels

sound like lack of lubrication at the steering joints, your ball joints need greasing and make sure you bleed power steering system, check power steering fluid level.if low more like power steering system full of air need bleeding.

Jan 25, 2012 | 1997 Jeep Grand Cherokee

2 Answers

Want to bypass powersteering pump on 94 grand caravan 3.3 liter 6 cylinder, pulley making loud noise need new belt size and serpintine diagram if its possible

that's not possible all of those vehicles came stock with power steering so all belt dimensions are taking the power steering pump into consideration,the only one that would change would be the A/C belt depending on whether or not your vehicle came with it or not,a used power steering pump should only cost just a little bit more then a new serpentine belt,hope this helps and good luck

Jun 19, 2010 | 1994 Dodge Grand Caravan

1 Answer

I have prablems i my power steering

My power steering pressure hose has a visible hole in it and squirts fluid when turning the wheel. How do I replace the pressure hose assembly? Is it O.K. to drive, if I top off the power steering fluid tank, and drive it about 10 miles to Autozone while it's still leaking?

Aug 28, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Power steering pulley wheel is squeaking

your power steering pump is probably starting to go out, its best to have it changed before anything like that happens

Jul 25, 2009 | 1995 Jeep Grand Cherokee

1 Answer

94 Grand Am looses power and abuses fuel. What is

Your fuel filter is probably on the fuel pump or on the fire wall of your engine - Mostly likely off of your fire wall. If it is loosing power have your catalytic convertor checked. Change your fuel pump, this could be your problem. All of these you can change yourself. I don't believe that a '94 Grand AM has an access panel to the fuel pump so you will have to drop the tank - Just make sure that it is below a 1/2 tank before dropping it. Buy a Chilton and it will give you step by step direction. Good luck!

May 16, 2009 | 1994 Pontiac Grand Am

1 Answer

1999 grand am gt power steering presure hose

if you replacing only lines for power steering you dont have to take out the belt but on other side of linens are very hard to disconnect from the rack and pinion...
you have to lift and secure the front disconnect the lines from pump and fallow he lines and keep disconect the holders from the body when you rich the end you are right under the driver seat you will see the very little open space and you see the bolt that connects linen to rack and pinion you will need long wrench take it out..just take your time ..when placing the new line just make sure it seats good on place and you gonna need the bleed power steering system after changing the lines...
so finally this job is really hard to do if you don't have experience i recommended to you just bring somebody know what he's doing for save time and not to do some job double time.Power steering system is closed system air or heavy leaks can damage your expensive power steering pump and rack and pinion.

Mar 16, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
1994 Pontiac Grand Am Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides