Question about Jeep Amc

1 Answer

Need instruction on replacing timing chaing and timing gears on 98 jeep wrangler

Posted by on

  • 2 more comments 
  • bweatherford Jan 03, 2011

    Thanks, can you send me the instructions as well?

  • bweatherford Jan 03, 2011

    I have a 98 jeep wrangler 4 cylinder that needs to have the timing kit installed. I need instruction on installation.

  • bweatherford Jan 03, 2011

    4 cylinder

  • bweatherford Jan 03, 2011

    4 cylinder

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

This is a pretty involved job. I always tell my customers to go to the local Library and check out the Hughes or Chilton's Manual. It is free and will save you a lot of time and money. I could explain how to do this. But I am sure that myself or any other Expert on here would be going off of memory, and could leave some steps out. That is why I always suggest the library. Checking the book out is free and I am sure that it will save you a lot of time.

Posted on Jan 03, 2011

  • Rodney Clark
    Rodney Clark Jan 03, 2011

    What engine do you have in your Jeep?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

98 jeep wrangler tj 4.0 oil pan bolt pattern or layout. An torch specs


Bobby, oil pan bolt torques for 4.0 Wrangler. Oil Pan Bolts 1/4 84 in-lbs Oil Pan Bolts 5/16 132 in-lbs As far as sequence, see last link, start in center, criss cross pattern tighten snug all, then repeat to torque spec.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Oil Pan Gasket leaking
http://jeephorizons.com/tech/99_40l_torque_specs.html
98 jeep 4 0 oil pan bolt torque sequence specs Google Search

May 21, 2016 | Jeep Cars & Trucks

1 Answer

98 Jeep Wrangler will shift when off but not while running makes grinding noise.


There is something wrong with the clutch. Make sure that there is enough clutch fluid in it. For some reason the clutch isn't disengaging like it should, so you are grinding the gears in your transmission, making that awful noise. You want to get it looked at before you ruin your transmission by stripping the gears.

Feb 20, 2012 | 1989 Jeep Wrangler

1 Answer

I NEED INSTRUCTIONS ON HOW TO RE ADJUST THE DISTRIBUTOR AFTER A TIMING DRIVE BELT BREAK ON A 98 JEEP WRANGLER 4.0


timing drive belt? there is no timing belt, and the drive belt does not affect timing ,so what is the question? the distributor adjustment needs to be done with a scanner to adjust sync.

Sep 12, 2011 | Jeep Wrangler Cars & Trucks

3 Answers

Wrangler will not go into gear when the jeep is off


if transmission was good when engine is off you should be able to go through the gears. can also be stuck in between gears which you can fix by replacing worn shifter.

Jan 17, 2010 | 1989 Jeep Wrangler

1 Answer

98 Jeep wrangler, fan/air won't cut off


Replace the blower motor resistor. You can unplug the fan till you get one. Usually located behind the glove box.

Jun 10, 2009 | 1998 Jeep Wrangler

1 Answer

Cant shift into first gear or reverse


You are likely correct...sounds like the synchro is shot or the shift fork is somewhat worn. Is fluid full?
As long as the clutch does not slip and is engaging and disengaging somewhere in the center to just below center of travel, it's OK.

Apr 22, 2009 | 1999 Jeep Wrangler

2 Answers

1991 jeep wrangler not shifting into gear could this be clutch


I would first bleed the tranny lines, if that doesnt work then your tranny is out and need to get it replaced. FYI with Jeep Wranglers, It is better to get a new transmission then to rebuild them

Feb 09, 2009 | 1991 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...