Question about 2001 Toyota Corolla

Open Question

Toyota Tazz 1.6i. The motor cuts out while driving as if the imobiliser is switching the motor off. To get it running again i have to switch off the ignition and then back on again. Is it the immobiliser itself, the ignition relay or something else

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 350 Answers

SOURCE: Ford Courier Van imobiliser stuck on

hi not as simple as that have you checked all the fuses and corresponding relays and wiring connectors there is a web site that gives you the wiring diagrams for the security systems if you are ok with wiring diagrams then you will either be able to by-pass or or put a remote start switch in but as i said it is not a five miniute job if you want i can send you the sites details yates210456

Posted on Oct 17, 2008

Ad
  • 1 Answer

SOURCE: Ignition Immobiliser

check fusible link or faulty wirings!your problem is near the source or supply of the battery...you can do that!trust your self

Posted on Jan 17, 2009

landsend
  • 1066 Answers

SOURCE: replace the ignition switch for 1998 toyota corola

first, remove the steering wheel and then remove the top and bottom covers on the steering column

Posted on Mar 26, 2009

  • 31 Answers

SOURCE: Temperature gauge faulty on toyota tazz 1300

pls check the fuse

Posted on Jul 19, 2009

ginko
  • 19396 Answers

SOURCE: P2008 Intake Manifold runner control

Hi.

P2008 means intake runner control circut/open bank 1. The intake mainfold running solenoid must be checked and eventually replaced. The solenoid is located off the vacuum hose and operates the intake runner shaft throught the mainfold.


Regards.

Ginko.

Posted on Nov 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Toyota tazz 1996 model 1.3l it is cutting out at robots when you stop but if you keep driving, does not cut out. starts straight away again when you restart though.


I would get a can of spray throttle valve cleaner and clean the gunk off the throttle blade butterfly and also clean the idle speed control valve.

Sep 06, 2016 | Toyota Cars & Trucks

1 Answer

WHRE IS THE FAN FUSEE IN A 1.3 TOYOTA TAZZ


you changed the thermo switch and relays and it didnt fix it
did you test the fan motor itself

the fuse box cover should have a fuse layout diagram
engine cooling fan

look for a 30 amp fuse

they usually near the fan relays

is the air con cooling fan working with air con on
and engine running




26238251-04wei2fenntfkeahz4fn3g0j-5-0.jpgwhre-fan-fusee-in-1-3-toyota-tazz#sln-36379873-rmi0ll110lgwm2wbdtthe4rs-3-2_0.jpg

Jul 15, 2016 | Toyota Cars & Trucks

1 Answer

What is the main course of the engine to stop on its own while driving ?


The backfiring can occur because the car isn't shut off properly. Remember when we were kids and we would shut off, coast in gear and then restart and pop the accumulated gases? That said I think your anti-jack may be switching randomly and shutting you down. I'd start there.

Mar 06, 2015 | Toyota Cars & Trucks

1 Answer

Toyota tazz Downpipe replacement


Just unbolt the manifold and replace that section. You may be able to replace it from a wrecking yard for cheap money. The manifold is bolted to the engine and the other side is before the catalytic converter. You will need a gasket or you may be able to use some high heat gasket silicone to seal it up. All the best

Jun 28, 2013 | Toyota Tazz Cars & Trucks

1 Answer

How to find and replace thermostat,toyota tazz 2005 model


Make sure your a/c switch is off if its on then the fan will come on when the ignition switch is turned on.

Oct 18, 2012 | 2005 Toyota Tazz 130

1 Answer

TOYOTA TAZZ KICK BACK...


It sounds like it is loosing spark somewhere on the ignition circuit. e.g HT leads, distributor cap, one or more spark plugs faulty. The above usually happens when the engine is taking more load than usual, like going up a hill and the r.p.m at about 1500 - 3000.Try it again in a lower gear 1st or 2nd with the motor r.p.m high, about 5000 revolutions per minute.

Regards
Phillip

Sep 17, 2009 | Toyota Camry Cars & Trucks

1 Answer

Imobiliser malfunctioning


just cut the wires to the imobiliser be sure to join the matching wires .they will be colour coded

May 29, 2009 | 1992 Toyota Corolla

1 Answer

Tazz 13 2006 model - los of power


loss of power means loss compression, gas, electricity. also check the clutch disk pads.

May 14, 2009 | 2000 Toyota Corolla

Not finding what you are looking for?
2001 Toyota Corolla Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...