Question about Renault Sport

1 Answer

Does the bolt removal to access the light unit on the rear of my 2006 Clio need a special key? The bolt head looks like a combination Phillips/flat head. I don't want to damage the head, so please advise.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

It's a TORX bit a (six sided star) type driver. Any good parts or hardware store can help you with a basic set for inexpensive $

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the head lig ht motor fro m a Renault clio


U will need to remove the front bumper un bolt the 3 bolts and voila the light is in your hand. The bumper is held on by a few screws if memory serves me there are two on the slam panel couple in the wheel arch and a couple under most are little t20 torqs screws hope this helps

Jan 22, 2015 | 2003 Renault Clio

1 Answer

Clio 2000 16v tbelt marks


simple they are on the timing belt for this model if i remember rightly ,white lines ?? No thats the earlier models this is the one with no keyway on the crank ,special tool right hand side of the block just in front of the bellhousing ,remove the bolt and screw a special length bolt in to locate TDC then another special tool to locate the cams as the slot on the back of the cams isnt flush with the head but at a angle of about 30? ,last one i done i remove a injector and fount TDC with my long screwdriver down the hole then aligned the cams lobes on no1 to where i knew then should be then turned engine over by hand to ensure the valves cleared .Another tip drill and tap a thread into the bell housing in line with the ring gear 10mm then a bolt with the end ground to a point screwed in to lock the crankshaft then tighten the bottom pulley bolt with a 80cm bar and make sure it has at least 150lbs on it or the pulley will turn at high speed on the motorway and crunch all your valves gone again.

Mar 04, 2013 | 2002 Renault Clio

1 Answer

How to change the third break light bulb in a 2007 hyundai sonata ?


From 2006 to 2010, the Sonata's 3rd brake lamp requires the rear package deck be removed to access that bulb.
1. Remove the rear passenger seat bottom (remove two12mm bolts between the seat back and the seat bottom - tilt the seat back forward to locate these bolts).
a. Press the two bottom front edge tabs to release the front of the seat bottom from the floor.
b. Remove seat bottom & set aside w/two 12mm bolts
c. Tilt both seat backs downward
2. Remove the left & right hand shoulder cushions (12 mm bolt at the bottom of each cushion)
a. Remove seat belt from shoulder cushion guide at the top of the cushion
b. Lift up and forward on shoulder cushions to remove them (if equipped with side airbags, disconnect wire harness connector).
c. Set shoulder cushions aside w/two 12mm bolts
3. Using a small flathead screwdriver, pop out the 'SRS' button cover from the C pillar panels on the left & right hand side to access either the phillips head screws, 10mm bolts, or #30 Torque Screws
a. Remove screws and set aside
b. Using a standard flathead screwdriver, pop out the C pillar panels on both sides (clips hold these panels in place)
c. Set these panels aside after removal w/screws/bolts
4. Trunk Access-way panels are held in place by phillips head screws (two at the bottom (left and right hand sides) and 4 to 5 at the top .
a. Remove left and right hand panels and set aside w/screws.
5. Rear package deck held in place with two plastic clips (white, yellow or pink)
a. lie on your back inside the trunk (trunk lid open to allow for more light). Looking through access hole find 3rd brake light wire harness connector & disconnect.
b. locate package deck clips, one on the left and another on the right on the underside of the pckage deck
c. Squeeze clips to push them out - package deck will come loose
d. Remove package deck & remove 3rd brake lamp bulb socket (turn counter clockwise to remove). Replace bulb & reassemble in reverse order.

Sep 05, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

How to change the front brake pads on a v reg clio


The Renault clio should be easy,.jack up one wheel and remove the wheel and see what if any special tools will be needed. most have two bolts that hold the caliper to the back plate. The caliper hold the pads. Some of thes bolts are Allen head, some are Torq head, all are metric. some are held in with clips, remove the retaining pins and pull the clips out and the caliper comes out the front. Press the piston back into the caliper, so the new pads will fit over the rotor.

Jul 30, 2009 | 2003 Renault 181

1 Answer

Remeove rear combination tail light cover 2006 Nissan XTERRA


thode screws hold the lens or the light assembly? Allow for the whole tail light to come out and the bulb plug will be accessible. I never had the privilage. But how the lens fits will tell you. If the lens goes overthe edges, the whole unit comes out, lens is sealed. Good luck

Jun 03, 2009 | 2006 Nissan Xterra

2 Answers

My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some


replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.

May 26, 2009 | 2006 Hyundai Sonata

2 Answers

How do you replace rear rotors and brake pads on 2006 Jetta


There is a special tool you need to do this. It is virtually impossible to do without this tool. I got mine from Harbor Freight for $20. the kit comes in an small orange case and has multiple heads and it pushes and turns at the same time. Do not use a C-clamp, it will damage the piston. This tool still does use some manual labor, but it is worth it when you save a few hundred dollars doing it yourself!

Mar 14, 2009 | 2006 Volkswagen Jetta

3 Answers

Renault Clio sport R Reg - leaking manual sunroof


word_answers.gif Betta Windsrceens Stockport have been repairing sunroofs for 30 years. What i will tell you is both the mk1 and mk2 clios have a problem with the sunroofs.
The sunroof needs to be taken out cleaned damming seal on frame removed and fitted back with silicone sealer excess sealer clean of with white sprite no need to remove head lineing if fitted with 10 mm bolts use a ratchet spanner. Mk1 clios also leak from the arial remove and reseal. And mk1 & mk2 have a problem with the bulk head filling up with water. Open bonnet on the back of the bulk head is a hose about 6 inches long which gets blocked un block and the water can drain like it did the day the car left the factory. bettabob

image_icon_name.gifbettabob
image_icon_date.gifFebruary 2009

Oct 13, 2008 | 2000 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4848 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...