Question about Mercedes-Benz ML320

1 Answer

WHEN DRIVING MY MERCEDES BENS ML320, WHEN GIVING GAS THE CAR SWEAVE SIDE TO SIDE STEERING WHEEL ALSO. IT FEELS LIKE THE REAR SWAVE TO ONE SIDE AND THE FRONT SWEAVE SIDE TO SIDE. I HAVE TO LET GO THE GAS IN ORDER CONTROL THE CAR. WHEN THE SWEAVING OCCUR MY ! LIGHT FLASHES

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercedes-Benz Master
  • 1,348 Answers

Your vehicle has electronic stability control.it uses input from the ABS wheel speed sensors to determine if the brakes are to be applied to any one wheel.it sounds like you have an issue with a caliper that may be jamming up and the vehicle will compensate by braking the wheel in the back to correct the path.The ml320 is an all wheel drive and has a transfer case to give power to the front and rear axles.if there is an axle problem,or transfer case problem,it could cause what you are describing.you need to have the vehicle put up on a hoist and have the drive train and the brakes looked at.

Posted on Jan 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cuts off at stops


Try cleaning the throttle valve.

Jul 06, 2017 | 2007 Mercedes-Benz ML320 CDI

1 Answer

MY VERONA!!!


The steering wheel is getting stiff because the engine is dying, so it is not driving your power steering pump fast enough to give you proper pressure. I would first check your IAC, which will be located on the throttle body, and is what controls your idle.

May 05, 2013 | Cars & Trucks

1 Answer

There is play in the steering and wen driving it feels lyk one of the rear wheels is going to fall off, but wheel nuts are done up tight and were tightened evenly


Could be a wheel bearing, ball joint or tie rod end. All of these components keep the wheel tight to the chassis and suspension of the car. If there is play in the wheel or the steering wheel doesn't seem as responsive I would imagine you have some loose parts in your steering or suspension system. This can be very dangerous as wheels can fall off the car while driving if the condition is bad enough. Take it to a shop ASAP and have them look at your steering and suspension system!

Apr 05, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

1986 accord when shifting, giving gas or less gas power shifts?


Jack car up. Hold the front wheel with both hands in the 3 and 9 poistion. Try and rock it towards you and away. If it is easy to move the wheel bearings need replaced.

Take it to an alignment garage and get the tracking/alignment sorted. Are the inner edges of the tires worn?

Push down on the wing hard to compress the suspension and release, if one side returns slowly, new shock or spring is needed. See if you can spot any cracked springs too.

Jun 23, 2010 | 1986 Honda Accord

1 Answer

1999 plymouth Breeze 2.4 L wah wah sound from rear end and getting louder. 2 new back tires and 4 wheel alignment still makes wah wah noise and vibrates and wonders at high speeds, feels like the car is...


I would have the rear wheel bearings checked asap and rear brakes as well. Sounds like a very bad wheel bearing but also makes me wonder why the shop that did the tires and alignment for you didnt find this for you. After a alignment the car should be driven. So take it somewhere else and have the wheel bearings checked asap but be very carefull driving.

Jun 04, 2009 | 1999 Plymouth Breeze

1 Answer

Steering problem


Your power steering engine/ pully has gone bad. needs a replacement then.

Take care and do fix it on time before you get the steering rack damaged.

Good luck.

rate this please

Apr 15, 2009 | 2005 Honda Civic

1 Answer

Car steering


There could be numerous problems going wrong. Your car is rear wheel drive so it could very well be a bad wheel bearing. If it is extremely loose it can cause a shake in your steering wheel. You may want to check on the condition of your tires and rims especially the left front. A bad tire can cause a shake and pull. If you know how to use your car jack you can try jacking the vehicle up, and put both hands on your front wheel and move it manually to see if there is looseness. Most shops only charge about 1/2 hour to shake down the front end. BMW parts are expensive so be prepared!

Jul 19, 2008 | 1994 BMW 3 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...