Question about 1990 Toyota 4Runner

1 Answer

Getting no power to the fuel pump. Any ideas??

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

Have you checked the fuse and relay switch?

Posted on Jan 03, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I put in fuel pump, replaced the relays, and also put in fuel filter. Tried running a diagnostic on it but it seems the plug isn't getting power either. There is no fuel getting to the P71 motor.

The problem with the ALDL connector could be the cig lighter fuse.
Do you have power to the fuel pump relay ?
Will the pump run if you jumper the relay ?
Do you have power and ground pulse to the injectors ?

Mar 29, 2015 | 1999 Ford Crown Victoria

2 Answers

I have a chevy silverado that is not getting fuel to the carbirator I changed fuel pump and fuel filter any idea what it could be?

check if the fuel pump turns on if its a electronic pump if not check all your fule lined even in the fuel tank. also if its a manual pump you may of got a bad one also ma sure you installed the filter the correct way if its backward you will not get and fuel. also put a little gas in the carb to help prime the system

Jan 24, 2013 | 1994 Chevrolet K1500

2 Answers

I have a 1994 plymouth acclaim 4 cylinder 2.5 liter. I'm not getting power to the fuel pump its a new fuel pump. I also replaced the fuel pump relay. I have no idea what's wrong? Please help!

Check your fuses....and if they are ok then have someone check to see if there is power coming to the fuel pump with a multi-meter.

Oct 10, 2012 | Cars & Trucks

1 Answer

No power to fuel pump or feul shutoff

Fuel shutoff? Are you talking abouty the inertia switch? Are you aware that you will only have power to the inertia switch and to the fuel pump for about 2 seconds when the ignition switch is turned from OFF to RUN? If you are checking for voltage here after that time, you are not SUPPOSED to find any.

If you are not getting any voltage there during the 2-second "fuel prime" cycle, then you need to check your fuel pump relay circuits. (Primary AND secondary)

Nov 15, 2011 | 1999 Ford Econoline

2 Answers

1988 subaru gl power to fuel pump, fuses and links are good. pump works fine with power probe, just not getting power to it..diagram shows black and yellow wire to pump. it is in fact a blue...

The blue wire changes to Blue/White. It gets power from the Fuel Pump Relay. Fuse number 11 is the power source. The relay is up under the dash panel, blue connector

Nov 04, 2009 | 1988 Subaru GL-10

1 Answer

No power from fuse to fuel pump

check in trunk for a fuel cut out switch, it shuts down fuel flow in case of an accident

Feb 15, 2009 | 1996 Saab 9000

1 Answer

No power to the fuel pump

Sounds like you either have a bad relay or wiring issue here. First I would check to make sure your fuel pump fuse isnt blown 2.) Get a multimeter and check to see if you get power from the relay. 3 check to make sure you are getting a good ground the fuel pump. 4 check to make sure you are getting power to the relay. 5) Check to make sure you have a good relay. Hope this gives you some direction. Thanks for Using FixYa!



Nov 28, 2008 | 1992 Oldsmobile Cutlass

1 Answer

No power from fuse to fuel pump

fuel pump works fine but gage isn't working any one got any idea?

Oct 12, 2008 | 1994 Saab 900

Not finding what you are looking for?
1990 Toyota 4Runner Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides