Question about 1991 Geo Tracker

1 Answer

How many rpm should a 1991 tracker 1.4 auto - 1991 Geo Tracker

Posted by Anonymous on

  • loefflerw
    loefflerw Jan 03, 2011

    Your question doesn't make sense.

  • mdcliff Jan 03, 2011

    What are you asking?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 679 Answers

The 1991 model was 65 inches high, 142.5 inches long and 64.2 inches wide, with an 86.6-inch wheelbase. Small variations in those dimensions were seen during the course of production, but not more than an inch for any of the measurements. The Tracker is able to tow 1,000 pounds and weighs between 2,238 and 2,338 pounds.Early models of the mini SUV were powered by a 1.6-liter overhead cam 8-valve fuel-injected engine with four inline cylinders, while later models were upgraded to a version of the same engine with 16 valves.The additional valves gave the later models more horsepower and torque. The smaller engine produces 80 horsepower at 5,400 revolutions per minute, and 94 foot-pounds of torque at 3,300 rpm. The larger engine produces 84 horsepower at 5,600 rpm, and 98 foot-pounds of torque at 4,000 rpm. Equipped with an 11.1-gallon fuel tank, the vehicle gets 23 mpg in the city and 24 mpg on the highway with an automatic transmission. With a manual transmission it gets 25 mpg and 27 mpg respectively.
Thanks.



Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 geo tracker wheel bearing grease


old post
and common, prob.
it can be just the wear markets on the front pads yelling at you
"change me" soon for i die.
or the 4wd axle ends lockers are rusty and clicking. (common)

both the hubs and bearings are here.
http://www.fixkick.com/hubs/FW_BEARINGS.html

you can in fact remove just the auto/manual locking hubs
and drive, to prove they are good or bad. (easy huh)?

Apr 16, 2014 | 1991 Geo Tracker

1 Answer

1991 Geo Tracker Won't Start - Has No Spark And No Fuel Replaced: Control Module, Coil, Igniter, Distributor, Rotor And Cap, Main And Fuel Pump Relays, Under Hood Main Fuse Box And Fuses, Fuel Filter, Is...


sounds like canada or USA car, is it?
i just restored one, know it like back of hand.
no inertial switch, of any kind, no upside down car switch. like my mazda either. and that cuts fuel not spark.'

want to trouble shoot it or guess and go broke?
no spark, clear as day, and the ECU cuts fuel with no spark.
so forget fuel. totally.
ready to fix spark?
and you said no spark but failed to say,
at the coil or all 5 places. big deal that....

the ECU will talk to you, and tell you why, 1/2 the time.
is your tachometer dead, cranking> 4x4 have tach.
and will move to 0.3K rpm that is 3/10s of below 1 mark.
the 1 means 1000, so 3ths is 300 rpm. cranking. does it?
if not the ECU will throw,,no spark codes, 2nd clue.
what to learn?
http://www.fixkick.com/IGN_timing/no-spark.html

first check for spark that the ignition coil. center tower.
how:
in 1991,in the USA the spark creation changed, radically
the ECU generates park, in this way.
CMP in dizzy makes cam signal (there is no crank trigger in 91)
the CMP makes perfect square way
the ECU sees that. and triggers the ignitor
the ignitor charges the coil, and spark happens at the coil tower.
does yours?

if the eCU sees a missing CMP signal you get code 41.
if the ecu sees missing spark read back, code 42
you must crank for 5 seconds release the key to see codes of this type.,class.
do you know how to use the diagnostic jumper paper clip yet.

ask here for interactive answer.
http://www.fixkick.com/bbs2/Suzuki-bbs/forumdisplay.php?fid=2

Aug 12, 2013 | 1991 Geo Tracker

1 Answer

Won't shief into 1 st. gear, until it gets warmed up.


if your vehicle is an automatic transnission flued may be low or if the vehicle is a standard transmission it could be low on grease have it check by your auto mechanic or jiffelube.

Feb 22, 2011 | 1991 Geo Tracker

1 Answer

What is the oil pressure supposed to be for a 1991 Geo tracker?


10 psi or above at idle is fine. Normally it runs at about 30-50 psi at 2000 rpm.

Feb 07, 2011 | 1991 Geo Tracker

1 Answer

Necesito el manual para geo tracker


Autozone zone sells Haynes Manuals.

Autozone o otra auto partes tiendes tienen Haynes Manuals (un libro) par $20. Mi espanol is no bueno.

Nov 23, 2010 | 1991 Geo Tracker

1 Answer

How do i get a cv joint boot on my 1991 geo tracker without a tool


Most auto parts sell a cv joint boot which requires nothing more than a screwdriver. Assuming that all you need is the boot and not the cv joint (does it make a popping sound when turning), you can purchase the boot and the necessary grease to insert into boot. It wraps around the joint and uses a strip to screw it closed.

Jun 16, 2010 | 1991 Geo Tracker

1 Answer

1994 Geo Tracker 4x4 auto.Problem is that it wont shift until about 4000 rpm.Replaced modulator & did fluid & filter change.No help.What can I do now?Does this tranny (3-spd auto) have a governor?


yes that tranny has a governor. take off the transfer case and where the transfer case bolts to the transmission there is a ext. housing take off also and its bolted to the park shift gear check the govenor valve body for cracks.

May 31, 2010 | 1994 Geo Tracker

2 Answers

I need to find and install a clutch arm and pedal


a good soarce of information for auto problems such as diagrams and specs can be found @ auto zone.com

Aug 29, 2009 | 1991 Geo Tracker

Not finding what you are looking for?
1991 Geo Tracker Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...