Question about Chevrolet C1500

1 Answer

ALL I KNOW IS THAT MY SIGNAL LIGHT ON ONE SIDE DONT FLASH BUT BOTH STAY LIT WHEN TRUCK IS OFF

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!
Depending on the Yr/Model of the vehicle, when the Flasher is out, the light on the dashboard stays lit, but, when the key is turned to the OFF position, the indicator light goes OFF. The only time the Indicator Light and or the Turn Signals stay ON when key is OFF is when the turn signal switch is broken on older models, on newer models it is called the Multifunction Switch. This is possible since the Stop Lights (which circuit is hot at all times) are also controlled by Turn Signal Switch and when it breaks, it shorts out the Turn Signal circuit. Replacing the switch will solve your problem. Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Posted on Jan 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Chevy Caprice Wagon, right side signals and brake lights dont work


change the bulb if still out then check and test socket/ground wiring/wire harness for damage

Apr 28, 2017 | Cars & Trucks

1 Answer

My turn signals on my 1988 Jeep Comanche dont work.


My first guess would have been the turn signal switch, which you said you replaced.
You'll have to get a wiring diagram of the switch and start testing wires for power out of the switch. Could be a problem with the main harness going back to the rear of the truck, or a ground for those sockets.

Oct 12, 2012 | 1988 Jeep Comanche

1 Answer

How to change the turn signal flasher?


Check the the bulbs at the front and rear of the vehicle work. If one is not lit up, replace that one. On some of the earlier model cars the blinkers would stay solid and not flash when one or both bulbs were blown. Modern cars have a rapid flash when one or both are blown

Nov 24, 2009 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

2004 audi A6 flasher lights


You need a new hazard light switch - the relay for the hazards and turn signals is built in. It's $40 or so at a dealership to buy a new one.

May 19, 2009 | 2004 Audi A6

1 Answer

Driver side signals only work when headlights are OFF


What may have happened is either the headlights wiring or the parking lights wiring somewhere along the wiring fused to the left turn signals wiring. Depending on if the turn signals go on when you put the parking lights on or the headlights on.

If the signals come on when you turn on the headlights than you only need to locate the light green wire that comes off the left turn signal harness.

Next follow that wire the entire way back to the firewall looking for another wire fused to that wire as you go.

If there are no signs of this you need to continue looking on the other side of the firewall all the way back to the turn signal and hazard flasher unit which is a black box that connects to a black harness located next to a grey harness behind the knee bolster.

But if the signals come on when you turn on the parking lights than you will also need to check the wiring from the rear left signal and follow that light green wire all the way back to the turn signal and hazard flasher unit.

This should fix your problem, but if not than your problem may lay within the the wiring between the turn signal/hazard switches and the turn signal and hazard flasher unit.

Also you may have a burnt circuit in the junction block. This block is where the light green from the rear left signal and front left signal meet. Don't have a description but if you cannot find it let me know and I will go out to the yard and look myself and let you know.

Apr 22, 2009 | 2004 Dodge Intrepid

1 Answer

Left Signal light isnt blinking on my 2000 300M Chrysler


you need to replace the rear driver side light bulb. it will fix the problem.

Feb 27, 2009 | 2000 Dodge Ram 1500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...