Question about Nissan Sentra

1 Answer

Where is the oil filter on my 1996 nissan sentra xe? It is not where the owner manual said to find it. Engine type GA16DE

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 370 Answers

The filter is mounted on the side of the block. it will probably be on the back side towards the firewall, about a 1/3rd of the way up from the bottom of the engine block

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I activated the cruise control on my 95 Nissan Sentra and now it won't disengage...any suggestions?


Cruise Control Problem - Nissan Forum

www.nissanforums.com/b13-91.../135028-cruise-control-problem.html
Jun 21, 2007 - 4 posts - ‎3 authors 1994 Nissan Sentra 4Door XE with 5 Speed Manual, GA16DE, 230k Miles. ... Now theCruise control light in the middle of the dash will NOT light up and the cruise control will not engage no matter what button I push. .... Cruise Control NOT working.. sentravis, B14 95-99 chassis, 26, May 29th, 2009 12:24 ... speedometer not working?
15 posts
Aug 3, 2007
Solution for P0500 VSS speed sensor problem on Nissan ...
15 posts
Jul 10, 2007
Solved flashing cruise control light
8 posts
Sep 8, 2006
cruise control problem
11 posts
Jul 13, 2005
More results from www.nissanforums.com

Sep 30, 2015 | Nissan Cars & Trucks

1 Answer

How to replace the timing chain of nissan cefiro v6 2000? its 97 model.


Engine - Timing Chain/Front Cover Revised Procedure
Classification:
EM98-009
Reference:
NTB98-107
Date:
January 15, 1999
GA16DE TIMING CHAIN/FRONT COVER
REVISED SERVICE PROCEDURE
APPLIED ENGINE:
GA16DE
APPLIED MODELS:
1991-94 Sentra (B13) w/GA16DE
1991-93 NX1600 (B13)
1995-99 Sentra (B14) w/GA16DE
1995-98 200SX (B14) w/GA16DE
SERVICE INFORMATION
A revised service procedure for the engine front cover/timing chain has been adopted for the GA16DE. It is no longer recommended to remove the
cylinder head when removing the timing chain/front cover(s). Utilize the following steps when servicing the front cover, timing chain, guides or
tensioner(s)
PARTS INFORMATION
CLAIMS INFORMATION
Please reference the "Revision C" pages of the Nissan "1992-1999 Warranty Flat Rate Information Manual", Section "AG", Op Codes AG12AA,
AG14AA, AG142A, AG143A, AG144A and AG24AA. Also reference Section "CA", Op Codes CA20AA and CA22AA. You will note that the
descriptions and flat rate times applicable to the B13 and B14 vehicles (with GA16DE engines) for these Op Codes have been revised to reflect this
new procedure.
Caution
^ After removing the timing chain, do not turn the crankshaft and camshaft separately or the valves will strike the piston heads.
^ When installing chain tensioners or other sliding parts, lubricate contacting surfaces with new engine oil.
^ Apply new engine oil to bolt threads and seat surfaces when installing the camshaft sprockets and the crankshaft pulley.
^ Do not spill engine coolant on the drive belts.
^ Please refer to the Service Manual for the correct tightening torque.
Removal
1. Set # 1 piston at TDC on its compression stroke.
2. Remove the spark plug wires.
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 2
3. Remove the rocker cover (see Figure 1).
4. Remove the coolant reservoir tank with bracket and reposition it for clearance.
5. Support the engine with a suitable jack.
6. Remove cylinder head front mounting bracket.
7. Remove engine front mounting, then the engine front mounting bracket.
8. Remove cylinder head front cover.
9. Remove the upper chain tensioner (see Figure 2).
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 3
10. Wipe off the links of the upper timing chain next to the timing marks on the sprockets. Put paint marks on the timing chain, matching them with
the timing marks on the cam sprockets and idler sprocket (see Figure 3)
11. Remove the four (4) front cover to cylinder head bolts.
12. Remove side and lower engine compartment splash covers.
13. Remove the accessory drive belts.
14. Remove the crankshaft pulley.
15. Drain coolant by removing the cylinder block drain plug and opening the radiator drain **** (Refer to MA section of the Service Manual).
16. Drain engine oil.
17. Remove intake manifold support of engine front side.
18. Remove power steering pump, pump bracket and tension rod. Position pump aside for clearance.
19. Remove the thermostat housing (See Figure 4).
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 4
20. Remove the lower chain tensioner (see Figure 5).
21. Remove the front exhaust tube. Refer to the "FE" section (Exhaust System) of the Service Manual.
22. Remove the front and rear engine gussets (if equipped) on either side of the oil pan.
NOTE:
On A/T models, remove the rear plate cover.
23. Remove the oil pan (see Figure 6).
a. Insert the Tool between the cylinder block and oil pan.
CAUTION:
Be careful not to damage the aluminum mating face. Do not insert a screwdriver, or the oil pan flange will become damaged.
b. Slide the Tool by tapping it on the side of the Tool with a hammer.
24. Remove the A/C compressor and position it aside for clearance.
25. Remove the A/C and alternator bracket with the alternator.
26. Remove the oil pump drive spacer.
CAUTION:
Be careful not to scratch the drive spacer when removing it.
27. Remove the front cover bolts and front cover.
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 5
CAUTION:
One bolt is located on the water pump (see Figure 7).
*1: Located on engine front mounting bracket.
*2: Located on the water pump.
*3: Located on the power steering oil pump adjusting bar.
CAUTION:
Be careful not to tear or damage the cylinder head gasket.
28. Remove the cylinder block to front cover alignment dowels.
CAUTION:
Do not hit the dowels or the cylinder block will crack.
29. Wipe off the links of the lower timing chain next to the timing marks on the sprockets. Put paint marks on the timing chain, matching them with
the timing marks on the idler sprocket and crankshaft sprocket (see Figure 8).
Installation
1. Install the crankshaft sprocket, making sure the mating marks face the front of the engine.
2. Install the idler sprocket and lower timing chain using the mating marks and the paint marks made during the removal process.
CAUTION:
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 6
Be careful not to tear or damage the cylinder head gasket.
3. Install the lower chain guides.
4. Front cover installation:
a. Using a scraper or other suitable tool remove all traces of liquid gasket from the cylinder block and front cover mating surfaces.
b. Install new crankshaft seal in front cover.
c. Install new oil passage O-rings and apply a continuous bead of RTV sealant to the front cover (see Figure 1).
NOTE:
Use Genuine Nissan RTV silicone sealant P/N 999MP-A7007, Three Bond P/N TB1207D or equivalent.
d. Install the front cover to the engine.
CAUTION:
Be careful not to tear or damage the cylinder head gasket or oil seal.
5. Align oil pump drive spacer with the oil pump, and install.
6. Install the oil strainer.
7. Install oil pan, referring to "Installation" in the "OIL PAN" section of the Service Manual.
8. Install upper timing chain and sprockets, using the painted reference marks made during removal.
9. Install upper chain tensioner.
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 7
a. Before installing the chain tensioner, insert a suitable pin into the pin hole of the chain tensioner (see Figure 2) to hold the tensioner in.
b. Once the tensioner is installed, remove the pin.
10. Install the lower chain tensioner (See Figure 3).
NOTE:
Make sure the gasket is facing the proper direction before installing the tensioner.
CAUTION:
Now rotate the crankshaft by hand. Check that no binding or interference problems occur when the engine is rotated.
11. Install the thermostat housing.
a. Use a scraper to remove all traces of liquid gasket from the mating surfaces of the engine front cover and the thermostat housing.
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 8
b. Apply a continuous bead of RTV sealant to the housing as shown in Figure 4.
NOTE:
Use Genuine Nissan RTV silicone sealant P/N 999MP-A7007, Three Bond P/N TB1207D or equivalent.
12. Install camshaft sprocket cover:
a. Use a scraper to remove all traces of liquid gasket from the mating surfaces of the cylinder head and camshaft sprocket cover.
b. Apply a continuous bead of RTV sealant to the cover as shown in Figure 5.
NOTE:
Use Genuine Nissan RTV silicone sealant P/N 999MP-A7007, Three Bond P/N TB1207D or equivalent.
d. Install camshaft sprocket cover.
1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 9
13. Apply RTV sealant to rocker cover gasket (see Figure 6a) and install rocker cover, tightening the bolts as shown in Figure 6b.
14. Install the following parts:
a. Crankshaft pulley.
b. A/C compressor and alternator bracket with alternator.
c. A/C compressor.
d. Power steering oil pump and tension rod.
15. Install front and rear engine gussets (if equipped), and rear cover plate (A/T models).
16. Install front exhaust tube.
17. Install upper right engine bracket and mount.
18. Install coolant reservoir tank.
19. Install alternator, power steering and A/C compressor drive belts.
20. Install engine compartment splash guards.
21. Install vacuum hoses, electrical harnesses and connectors.
22. Install spark plug wires.
23. Refill with coolant. Refer to the "MA" section ("Changing engine coolant, Engine Maintenance") of the Service Manual.
24. Refill with engine oil. Refer to the "MA" section ("Changing engine oil, Engine Maintenance") of the Service Manual.

Jan 15, 2011 | 1997 Nissan 200SX

1 Answer

I am looking for the firing order for the 96 nissan sentra


According to the manual of my 1996 Sentra XE, the order is 1-3-4-2. Should be the same for GXE.

Aug 10, 2010 | 1996 Nissan Sentra

2 Answers

Where is the thermostat located on a 1989 nissan sentra dalet5032@gmail.com or where can i find a diagram


1.6L (GA16DE) and 2.0L (SR20DE) Engines
The thermostat is housed in the water outlet casting on the cylinder head on most models. On the GA16DE engines, the thermostat is housed in the water outlet casting attached to the water pump.

6516731.jpg

Fig. : Thermostat and housing-SR20DE engine

e78e9ef.jpg



Fig. : Thermostat and housing-GA16DE engine


dedccd7.jpg

Fig. : Always make certain the jiggle valve is on the top side-GA16DE engine shown

Hope this helps (remember rated this).

Aug 03, 2010 | 1989 Nissan Sentra 4 Door

1 Answer

Do you take back seat out to replace fuel pump on 94 nissan sentra ex car


Hello there:
no this is a intank fuel pump
Location: In-Tank Type: In-Tank, Electric, Direct OE Replacement Condition: New Part#: REPN314501 $70.00
FITS (ENGINE/CHASSIS)
  • 1994: E; 4Cyl 1.6L GAS, FI, VIN "E", GA16DE;
  • 1994: GXE; 4Cyl 1.6L GAS, FI, VIN "E", GA16DE;
  • 1994: SE-R; 4Cyl 2.0L GAS, FI, VIN "G", SR20DE;
  • 1994: SE; 4Cyl 1.6L GAS, FI, VIN "E", GA16DE;
  • 1994: XE; 4Cyl 1.6L GAS, FI, VIN "E", GA16DE;
  • 1994: Limited Edition; 4Cyl 1.6L GAS, FI, VIN "E", GA16DE;

  • Jan 06, 2010 | 2000 Nissan Sentra

    2 Answers

    Nissan sentra fuel problem. Put new filter and fuel pump but no gas getting to filter to get to pump. Gas line problem from tank?


    I believe this is a manual fuel pump and you may have lost the prime, no fuel in hose to tank. If the hose from rear frame to tank has a break or hole, it will **** air and not fuel from tank. If this is not the case, possible clogged fuel hose, tubing, or pickup tube in tank assuming you have turned the engine over serveral times and there is enough fuel in tank. Some tanks do not pickup from very bottom because of water laying in bottom of tank from condensation.

    Dec 12, 2009 | 1984 Nissan Sentra XE

    2 Answers

    I need workshop/owner manuals to download for a nissan sentra s 1996 hatchback petrol manual car.Can you help please


    I can help you with the owners manual. The link below will take you directly to the 1996 sentra owners manual. It is not specific to body style, as the hatch back had the same manual as the 4 dr coupe and the sentra SE-R. Good luck! I hope you find this very helpful!

    http://www.nissanextendedwarranty.com/owners-manual/nissan/1996-Nissan-Sentra.pdf

    Dec 11, 2009 | 1996 Nissan Sentra

    2 Answers

    Where is the thermostat housed on a 1996 Nissan Sentra? I followed the top radiator hose to the engine but it didnt lead me to a housing casing for the thermostat.


    oh, a sentra is the bottom hose, follow that to engine you will see the housing it has 2 or 3 nuts holding it to the block, good luck,

    Oct 31, 2009 | 1996 Nissan Sentra

    1 Answer

    Whats the timing for the nissan sr20 motor in my 96 serena van.. cheers weetbix


    GA16DE and SR20DE Engines



    1. Start the engine and allow it to reach normal operating temperature.
    2. Run the engine at 2000 rpm for 2 minutes and return to idle.
    3. Turn the engine OFF and disconnect the throttle position sensor harness connector.
    4. Start the engine and race the engine to 2000 rpm, 3 times.
    5. Connect a timing light to the No. 1 spark plug wire and battery.
    6. Loosen the distributor hold-down bolt and adjust the ignition timing to 10 degrees BTDC for the GA16DE and 15 degrees for the SR20DE engines.
    7. Turn the engine OFF and reconnect the throttle position sensor harness.

    _Ricky got this from the web

    Aug 18, 2009 | 1996 Nissan Sentra

    1 Answer

    97 NZ new, Nissan Sentra Q with erratic RPM indication.


    do you mean the speedometer or the engine RPM ----gearbox??? if its the engine RPM their is no sensor as it reads from the ECU unit which is controling the engine management

    Mar 14, 2009 | 1998 Nissan Sentra

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    236 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    705 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...