Question about 1994 Chevrolet Camaro

1 Answer

I have possible electrical wiring problems, my headlights recently both went out one by one low beams left then right then high beams the same also my turn signals do not work also reverse light. all bulbs and fuses have been checked what can it be?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 288 Answers

I WOULD CHECK THE ALTERNATOR, POSSIBLY OVERCHARGING. I WOULD ALSO REPLACE 2 OF THE SMALLER BULBS BEFORE STARTING THE CAR. IF THE BULBS COME ON, FIX THE CHARGING SYSTEM & REPLACE THE REST OF THE BULBS

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

High beams work for both lights, 1 low beam does not


Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

Left headlights


Check your connections at the wiring harness going to headlights for corrosion, sounds like high resistance somewhere, also make sure your ground wires are secure. It wouldn't be the alternator or the battery would be dead and not start the engine. Also shouldn't be any condensation in your head light assembly's or will cause bulbs to blow prematurely.

Feb 22, 2014 | 2002 Subaru Outback

2 Answers

I have a 1994 geo metro. The headlights went out. I checked the fuses. They were ok. The ground wire in the under dash fuse box looked discolored. I made a ground and the left side head light came on...


On these cars the headlights get power from a right and left fuse and the headlight / dimmer switches provide the ground circuit. Both headlights are connected to one ground wire for high and one for low beam. So if one works and the other does not, the problem should be in the wiring before the headlight switch. Red is for high beam and red-white is for low beam. You should be able to jumper the red-white wire on the right headlight and make the low beam circuit for both sides work to test it.

Jan 22, 2014 | Geo Cars & Trucks

1 Answer

I have a wiring problem.


Need your make and model. Usually low/high beam lights have 3 inputs. While high beam only lights have only two. Every make/model has different color schemes so that's why it's important to have full make/model. Someone with experience could easily do it with a multi-meter. It's all 12 volts. One ground, two hot wires one for low one for high.

Nov 16, 2011 | Cars & Trucks

4 Answers

2004 Lincoln Navigator low beam headlight went out so I changed the bulb and fuse but it still does not work.


If you have the HID bulbs check with an Autoparts store like Autozone. I believe the right and left headlights have separate Relays in the Powerbox. It is possible that there are 2 low beam and 2 high beam relays total. They pull too much power for both sides to be wired together and may wire the high beams separate too!

Feb 08, 2011 | 2004 Lincoln Navigator

1 Answer

Low Beam Drivers Side doesn't work ... low voltage,


Power for the headlights on the Left side (High and low beam.) comes from the same fuse... The ORANGE wire and the ORANGE/BLACK are the same, they connect in the harness. If you only lack the 12v to make the light work connect them at the headlight assembly.

If your low beam also lacks ground the Left low beam ground is shared with the right low beam ground... Run a wire from left low beam DARK BLUE to right low beam DARK BLUE/WHITE.

If its not working now then your cursed, seek a witch doctor.

May 23, 2010 | 2004 Buick Regal

1 Answer

Euro low beam right side brighter than left side


You have a bad ground on the left low beam. Using a test light connected to ground see what wire is positive with low beams on. Using a piece of electrical wire connect one end to ground and with the headlight connector connected to the headlight and headlights on stick the other end into back of the connector at the ground wire. If the light gets brighter, you can cut the original ground wire to the connector ( 2-3 inches from headlight connector) and run a new wire from ground and connect it to the wire at the connector. Hope this is helpful.

Jun 21, 2009 | 1994 Honda Civic

1 Answer

Left low beam headlight on Chrysler 2003 T&C wont work while engine is on


Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.

Apr 18, 2009 | 2003 Chrysler Town & Country

1 Answer

Left low beam is dim


The mechanic didn't hook up the ground wire. The system is using the other light as it's ground and when this happens it causes the other light to go out.

Check the ground wires

Aug 24, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...