Question about 1998 Mercury Villager

1 Answer

Tail lights went out while trouble shooting turn signal problem. I have the turn signals working and the flashers but have no instr. panel lights or parking lights. The brake lights work also and I have checked all the fuses except the big square ones, any ideas? Maybe the light switch?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble shoot turn signals 1994 Ford Ranger 2.3 engine


Diane, There are 2 separate flashers on your vehicle, one is for the emergency/4 way lights and one flasher is for the signal lights. It may be worth the couple bucks and replacing the signal flasher as a first step. Recheck bulbs/sockets, fuses/relays, flasher. If all looks good possible signal switch is bad. Remove switch and try to clean contacts or replace switch. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://ca.answers.yahoo.com/question/index?qid=20090405174036AARb2Uc
1994 Ford Ranger Turn Signal Electrical Problem 1994 Ford Ranger
93 Ranger Turn Signal Problem Ford Truck Enthusiasts Forums

Aug 20, 2016 | 1994 Ford Ranger Supercab

1 Answer

None of the blinkers work on my 1996 dodge stratus, all bulbs are good as the park lights and flashers work. I have three dead ports in fusebox under hood.


Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.

Sep 14, 2012 | 1996 Dodge Stratus

1 Answer

How do you trouble shoot flasher in 97 Ford Aspire


the flasher should be located on the fuse panel, however if your turnsignal works without light on there is nothing wrong with it. sounds to me like you have a - of one circuit shorting out on the the+ of the other, probably int the light socket of one of the right side marker lights. start buy tring right turn signal with just marker lights on first.

Jun 09, 2012 | Ford Aspire Cars & Trucks

1 Answer

My rear turn signal was not working. I changed the bulb and tried again and this time none of my signals are working, nor my hazard lights. I changed the fuses inside the car but that did not work.


Last thing to try before trouble shooting the wires for a short is the flasher unit. Usually it is located on or near the fuse box and is normally round and silver about 1" in diameter. If that doesn't work, none of the turn signals or flashers will work. You you had flashers but not turn signals I would say look at the switch on the steering column but you have nothing which points to the flasher control.

Feb 17, 2011 | 2004 Chevrolet Cavalier

1 Answer

1973 ford truck has no insturment panel lights working. All gauges work but no lights like turn signal.


Check the fuses for the panel, ( usually marked instr clstr), and check the fuse for the turn signal, if that fuse is ok, then change the flasher unit, it's a small round cylinder plugged into the fuse box either silver or blue in color. The 4 way flasher is shaped the same, make sure you get the right one. Turn on the 4 ways, listen for the clicking at the fuse box, which ever one is not clicking is the turn signal one.

Mar 30, 2010 | Ford F-250 Cars & Trucks

2 Answers

Turn signals don't work


i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated

Nov 25, 2008 | 1989 GMC K1500

Not finding what you are looking for?
1998 Mercury Villager Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...