Question about 1987 Oldsmobile Ninety Eight

3 Answers

All lights work on my car and i have new bulbs in the rear for turn signals but none of my signals work. all fuses r good and wiring looks good. what cud cause this.

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,165 Answers

There are two flashers under the dash, one for turn signals and one for the hazard flashers. Turn the hazard lights on and see which one clicks. Replace the one that doesn't click.

Posted on Jan 02, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Bad flasher. if brake lights are working. Mash brake and check tail lights, pull turn signal down ,if light goes out the flasher is bad.with ing. off

Posted on Jan 02, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Did you change the flasher relay ? it controls the flashers and the hazard

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have sourced out all fuses and bulbs, yet continue to have a rapid right turn signal. I don't know where else to look. help?


replace the right rear bulb. the quick flashing indicates a bad bulb. it could be a wiring problem to the rear for the signal light that you will have to check out starting at the socket and working forward.

Mar 29, 2015 | 2005 Chevrolet Uplander

2 Answers

69 turn signal problem left turn signal not working. right turn signal causes both to falsh


it's the grounds if they're both flashing fast it's definitely grounds take a test light and see if its got power goes through the test light grounded to the frame and if the light comes on then it's definitely your grounds

Jul 29, 2014 | 1969 Pontiac Firebird

2 Answers

2000 jeep grand cherokee none of the rear lights work


Check BackUp Module, generally is located in the rear quarter panel (drivers side).

Dec 23, 2012 | 2000 Jeep Grand Cherokee

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

My right front turn signal wont work, the dash board light came on telling me i need a new bulb i put one in and it still does'nt work . I checkd all fuses and they are good , me right rear turn l


are you sure that you put the right bulb in? Some of these bulbs look very similar, (like a 3057 and 3157 or 3156) but they are different. A customer came in with this problem and the problem was that they put a bulb with a single filament in when it was supposed to have a dual filament. the bulbs looked the same and they just grabbed them off the shelf instead of asking the parts guy what their vehicle called for.

May 27, 2012 | Cars & Trucks

1 Answer

How to fix the signals


first check signal lights fuses if none of signal lights work.if fuse okay,check for burn out bulbs.if all is good turn signal switch is bad or you have loose wire to signal switch if your turn signal lights work some times.

Nov 26, 2011 | 1985 Mercedes-Benz 190

2 Answers

Both of the rear turn signals stopped working at the same time, but everything else seems to work. Do you know what can cause this to happen? I changed one of the bulbs and it didn't work.


There is a turn signal flasher under dash...most have a flasher for the emergency signals and one for the turn signals...some have one flasher....but check fuses first...normally it is fuse burnt...if you can locate the flasher normally they will get abnormally warm when bad......it should look like a round or square silver shiney or black cube.........if these are good with ign.on hold turn signal lever down firmly ...if it works replace turn signal unit.....if none of this works you have to troubleshoot wiring...
...normally yellow wire is left turn and green wire is right turn...black or white is ground red is stop light....but normally it is a blown fuse or flasher.

Feb 19, 2011 | 2007 Ford Freestyle Limited

1 Answer

My rear turn signal was not working. I changed the bulb and tried again and this time none of my signals are working, nor my hazard lights. I changed the fuses inside the car but that did not work.


Last thing to try before trouble shooting the wires for a short is the flasher unit. Usually it is located on or near the fuse box and is normally round and silver about 1" in diameter. If that doesn't work, none of the turn signals or flashers will work. You you had flashers but not turn signals I would say look at the switch on the steering column but you have nothing which points to the flasher control.

Feb 17, 2011 | 2004 Chevrolet Cavalier

1 Answer

Right read blinker/break light dont work, turn signal blinks rapidly


It's the bulb. There are two filliments in the bulb. One is for when you turn your lights on and the other is for breaking and blinker flashing. When the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would work.

Apr 20, 2009 | 2005 Ford Explorer

1 Answer

Brake lights in rear will not work


Do you have a trailer plug? Look for corrosion around taillight plug under truck in the back, PULL IT APART to see if there is any corrosion. If you find none, than take the taillight housing out and run a external wire from a clean spot on frame to the ground on housing, it could be a ground issue. Did you test light the break light switch power in power out?

Apr 10, 2009 | 1991 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...