Question about 2001 Ford Expedition

1 Answer

2001 ford exped

How do you take off the door panel to the driver's side?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 235 Answers

First remove the sail like cover at the right upper corner of door panel.remove the window switch assembley by prying upward, once you get this pryed out disconnect the electrical connectors from the switch assembley,remove the top panel screw whare you took the sail shaped cover off then remove the screw that can now be seen through the window switch hole,remove the curtesy lamp lens and the screw behind it.pull the door release handle outward and pop the trim cover off from around it and remove the handle by taking out the bolt. after all this get hold at bottom of panel and lift straight up then out.

Posted on Jan 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 F-150 FX4 Crew Cab has rust forming on bottom of 2nd doors both sides. Will Fords EXP plan cover this issue.


Hello, The rust needs to be through and through and they will cover it. So if the rust is only on the inside you can ask but it is up to the Dealer to decide. If the rust is on the inside and starting to appear on the outside, it is a through and through condition.

We have a Lincoln which rusted on the trunklid and drivers' door bottom. The Dealer replaced the door and trunklid and painted about 80% of the car including surface (one-sided) rust on the rocker panels. Everything blended in and the car was almost 7 years old. All Warranty coverage.

Apr 22, 2011 | 2006 Ford F-150

1 Answer

Ford focus zx3 2001 driver side door does not open from outside


that small plastic thing is always braking(slam the door a few times.....)you can get one from a ford dealer and its a pig to get to to repair....

Jul 09, 2010 | 2001 Ford Focus

1 Answer

How do i remove drivers side door panel on a 2001 f150


take the screws out the door panel should pop out a little then pull up on it and it comes off

Mar 15, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

I have a 2001 ford explorer' having trouble taking


Heres a diagram to help you, it shows all screw locations and after the screws are removed the panel is then pryed off, hope this helps.12758c9.jpg

Mar 08, 2010 | 2001 Ford Explorer Sport

1 Answer

01 ford exp. sport fuse box pic.. the drivers side window just stopped working today ,good thing it was up..


If you can hear the window motor working ,the drive belt is probably broken ,that is to make the window go up or down .
If no sound ,the wire's in the door jam are probably broken ,you can test this by using a test light.
Also, check the electrical connection's on the window motor,and make sure they are not melted.

Mar 07, 2010 | 2001 Ford Explorer Sport

1 Answer

2001 Ford Excursion door locks will not unlock or lock.


Unfortunately the actuators are bad. You could try removing the door panels and disconnect one actuator at a time and possibly only have a couple bad but it is common to have more than on go bad. I hope this helps. Good luck.

Jul 18, 2009 | 2001 Ford Excursion

1 Answer

Need to know how to remove drivers side door panel to replace lock actuator on 2001 f350 ford truck.


Remove the light cover at bottom of the door and pull out the screw
pry up the black switch panel and remove the screw from behind that.
pry off the black plastic triangle pcs at the front of the door above the arm rest , then lift straight up on the panel ( unplug window and locks) and light wiring at bottom after lifting door panel

Mar 23, 2009 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Changing outside door handle drivers door


first disconnect the negative side of battery and then open the door and start looking for small black screws or nuts then remove you find some hidden behind what look like little doors that you will need to remove with a screw driver becareful not to pry the plastic completely out of the door panel itself because if this happens you will have to figure out a way to repair so the panel will stay on the door get a thin pry bar to this job or a butter knife

Jan 05, 2009 | 2001 Ford Explorer Sport

1 Answer

REPLACE FORD TAURUS WAGON DRIVER SIDE MIRROR


you have to take the door panels off. remove all screws you will have plastic pieces called christmas trees that hold the panel in place. there is a tool for this you can pick it up at Napa for cheap this will allow you access to the inner space of the door un plug plugs to power switchs and the rod to your door catch hardeware you then can remove panel completely to get access to mirror assembly. installation of door panel is in reverse

Aug 31, 2008 | 2001 Ford Taurus

Not finding what you are looking for?
2001 Ford Expedition Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...