Question about 2004 Dodge Intrepid

Open Question

Where is the heater control valve in a 2003 dodge intrepid

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: Heater doesn't blow hot air

First check the coolant level in the radiator. Check your heater core hoses on the firewall underneath the hood. Let the car come up to temp. and feel the two hoses. If only one of them is getting hot you may have bad heater core or a bad heater control valve.

Posted on Jan 05, 2009

  • 2920 Answers

SOURCE: dodge intrepid 2003 power steering resevior has hole in it

there are 2 bolts that hold the reserviour on the vehicle once you remove those bolts you will need to take the hoses loose they should unscrew and then you can put the new one in the bolts are at the top and bottom of the reseviour

Posted on Jan 20, 2009

  • 1 Answer

SOURCE: heater control valve

Where is the thermostat in a dodge dakota 1992 located? Flushed it yesterday still just have heat blowinf ti side vents rather cool windsheild defrost. Maybe there is another problem?

Posted on Mar 14, 2009

  • 103 Answers

SOURCE: replaced fuel pump, spark plugs wires, fuel

Need a little more info to fixya.
Have you checked the MAP, O2, Coolant temp sensors (as well as all the rest) and the wires running to them?
Have you tried unplugging the sensors one at a time and seeing if that changes things?
Have you checked the conditions of the vacuum lines?
Lastly have you scanned the compute for codes?

Posted on Aug 10, 2009

  • 312 Answers

SOURCE: Chrysler intrepid 2003 obd 2 code P0441

Most common problem causing this code is the purge solenoid. A quick smoke test will show if you have any leaks in the system. If no leaks and the fuel cap is installed properly it's the purge solenoid.

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 dodge intrepid will not shift into third gear. code reader says po 700 and po 888 and transmission sensors have been changed also computer was flashed after used motor put in car


Hi there:
First I suggest complete trans flusing procedure done, and a transmission fluid modifier added at the same time. You might have a sticking valve in the valve body, and the flushing procedure may help that out if true. If not, you may still have a sticking valve in the valve body.

The P0700 code is stored in the ECM and just tell you that there is a code in the TCM (Transmission Controller), that is the P0888.



DTC P0888 is telling you that the Transmission Relay output is always off; in this link can checl the Diag Chart for that code, this coul help...







8_22_2012_9_52_07_pm.gif

Zoom Image link HERE

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 22, 2012 | 2003 Dodge Intrepid

2 Answers

Looking for a picture of the diagram of where the thermostat is located on my 1998 2.7 liter dodge intrepid PLEASE!!!!!


Hi, I don't have a picture, but trace the big hose from the bottom of the radiator to the engine, and it will be under the housing where the hose connects.


2.7L Engine

  1. Disconnect negative cable.
    CAUTION Do not remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.
  2. Drain cooling system.
  3. Remove radiator lower hose from thermostat housing.
  4. Remove nuts from heater tube flange studs.
  5. Loosen starter bolt at heater tube bracket.
  6. Pull heater tube out of thermostat housing and position out of the way.
  7. Remove bolt and two studs.
  8. Remove thermostat housing, O-ring and thermostat.
  9. Remove thermostat housing bolts.

To install:
  1. Clean gasket sealing surfaces.
    NOTE Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal.
  2. Install thermostat and seal into thermostat housing .
  3. If removed, install two studs.
  4. Install thermostat, thermostat housing and O-ring and bolt. Tighten attaching bolts to 105 inch lbs.(12 Nm).
  5. Lubricate new heater return tube O-ring with coolant.
  6. Position heater return tube flange over two studs. Install nuts.
  7. Tighten retaining nuts to 53 inch lbs.(6 Nm).
  8. Tighten starter bolt to 40 ft. lbs. (54.3 Nm).
  9. Connect the lower radiator hose to the thermostat housing. Install hose clamps.
  10. Refill cooling system.
  11. Inspect for leaks.
  12. Connect negative cable.

Mar 26, 2011 | 1999 Dodge Intrepid

1 Answer

I have a 2001 dodge intrepid. no heat, blower motor is working, not over heating, coolant level is okay


The valve controlling the  flow of coolant to the heater is stuck shut - either the valve itself or the cables controlling it are faulty. You will have to check which yourself.

Nov 19, 2009 | 2001 Dodge Intrepid

1 Answer

Heater doesn't blow hot air


First check the coolant level in the radiator. Check your heater core hoses on the firewall underneath the hood. Let the car come up to temp. and feel the two hoses. If only one of them is getting hot you may have bad heater core or a bad heater control valve.

Jan 04, 2009 | 2003 Dodge Intrepid

2 Answers

Starts but when put in gear it dies out


possibly a bad fuel injector. sometimes when cars are ran completely out of gas, the pump will pull tiny particles out of the tank and will clog the injectors.

Jul 16, 2008 | 2003 Dodge Intrepid

Not finding what you are looking for?
2004 Dodge Intrepid Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...