Question about 2008 Hummer H3
Take of the sheeting from the inside and you will find a plastic pin or screv or anything what is holding it.
Posted on Jan 02, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 01, 2015 | 2006 Hummer H3
Jul 11, 2013 | 2006 Hummer H3
May 28, 2012 | 2006 Hummer H3
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Dec 20, 2009 | 2008 Hummer H3
Nov 17, 2008 | 2006 Hummer H3
142 people viewed this question
Usually answered in minutes!