Question about 2003 Mitsubishi Eclipse Spyder

Open Question

How do you remove a glove box in a 2003 Mitsu Eclipse?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: My 2003 Mitsu Eclipse will

If you recently had your battery replaced, this could be the reason. I just had the same problem. Ended up that I had to have my fuel injection system cleaned. Cost a few hundred dollars when it was all said and done.

Posted on Nov 01, 2008

Ad
  • 258 Answers

SOURCE: Replace cabin air filter in 2003 Mitsubishi

u should be able to sqeeze the sides of the glove just far enough to get past the stops of the glove box. then u should see the access to the filter

Posted on Feb 10, 2010

Testimonial: "very correct on how to get the glove box off, sadly I still couldn't find the filter. I was told some 2003 Mitsubishi Eclipse's didn't have one(?)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 01 eclipse wire harness work for a 03


Possibly, it all depends on the ECU and engine sensors. The only way is to get a workshop manual and check all the connections. Mitsu often change sensors and connectors between years.

Oct 06, 2014 | 2003 Mitsubishi Eclipse

1 Answer

How do I remove the glove box in a 2003 Dodge Caravan?


open up glove box and push in the sides by the stops and it will open up completely. there is screws that hold the medal bracket that is attached to the glove box door that you remove to remove the glove box.

Aug 28, 2014 | 2003 Dodge Caravan

1 Answer

How to replace the cabin filter? 2003 tiburon gt


The air filter is located in front of the blower uniit
behind the glove box.
It operates to decrease pollutants from entering
the car and to filter the air.
Replacement instructions:
1. Open the glove box and remove the taping
screws on the upper side of the glove box.
2. Remove the taping screws on the lower
position of the glove box.
3. Remove the filter cover and replace the
filter.
4. Installation is the reverse order of disassembly.
Here is a link to your manual. I found this on page 66 or 6-8 in the manual.
2003 Tiburon Manual

Apr 22, 2011 | 2003 Hyundai Tiburon

1 Answer

Replace cabin air filter in 2003 Mitsubishi


u should be able to sqeeze the sides of the glove just far enough to get past the stops of the glove box. then u should see the access to the filter

Feb 10, 2010 | 2003 Mitsubishi Eclipse Coupe

1 Answer

Where is the blower motor located on 2000 mitsu eclipse?


Under the glove compartment close to the fire wall. You will have to remove a panel to get to it.

Oct 28, 2009 | 2000 Mitsubishi Eclipse

1 Answer

I have a 1992 mitsu eclipse 2.0l 16 valve, broken timing belt


it depends on car -some r protected against this because the piston is shaped so theres no contact with open valve-u can ask manufacturer. onother way is a compression chec-cylinders with bent valves hav no comp. and of course if u put a new belt on with the timing rite and it dozint start

Aug 23, 2009 | 1992 Mitsubishi Eclipse

1 Answer

Hepa filter


Remove the glove box.
Cut the plastic cross brace in the glove box opening with diagonal cutters in the area shown, and discard it.
df0f6a2.jpg Remove the bolts, the screws and the glove box frame.
21177f8.jpg
  1. Remove the filter lid (A) from the evaporator, then pull out the dust and pollen filter (B).
  2. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the evaporator.
  3. Install the glove box frame and glove box in the reverse order of removal.
443648a.jpg

Feb 13, 2009 | 2005 Honda Accord

Not finding what you are looking for?
2003 Mitsubishi Eclipse Spyder Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...