Question about 1998 Lincoln Continental

3 Answers

Diagram for 1998 lincoln continental

How do you route a serpentine engine belt on a lincoln continental

Posted by on

  • 11 more comments 
  • MARTYLR1 Sep 16, 2008

    there is no diagram under the hood

  • Anonymous Dec 09, 2008

    my serp. belt broke about 1/8 mile from my house. i got a new belt but all the diagrams that i have been able to find or that i have gotten from auto parts stores look nothing like how my pullies are set up and i can't figure it out.

  • Anonymous Dec 22, 2008

    Diagram for 1998 lincoln continental installing a thermostat

  • Anonymous Mar 14, 2014

    don't know combination to get into car with key pad. bought care used. locked keys in car

  • Anonymous Mar 16, 2014

    my 71 mark iii Lincoln Ican,t get the temperature control to go from heat to ac I get heat but when I SWITCH IT AC IT STAYS IN THE HEAT MODE

  • Anonymous Mar 19, 2014

    How do I change front engine mount on lincoln continental

  • Anonymous Mar 19, 2014

    how do I change engine mount on lincoln continental

  • Anonymous Mar 19, 2014

    how do I change engine mount on a 1999 lincoln continental

  • Anonymous Mar 20, 2014

    how do I remove the starter from a 1994 Lincoln continental?

  • Anonymous Mar 23, 2014

    When engine is warmed up, little or no hot air is blown into car.

  • Anonymous Mar 29, 2014

    The car is overheating. It has fluid and the fans are working

  • Anonymous Mar 30, 2014

    how to test a 1998 Lincoln continental blower motor resister using a volt o meter

  • Anonymous Mar 31, 2014

    need vacume diagram



3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Lincoln Master
  • 2,598 Answers

Best to Google it . depends on the type of motor , power steering, and air con . all explained with drawings on Google.

Posted on Mar 27, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i ronte a serpentine engine belt on a 1998 lincoln continental

Posted on Sep 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 250 Answers

There should be a diagram of the route printed on the fan shroud or somewhere else under the hood of the vehicle.

Posted on Jul 09, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Diagram for a serpentine belt on a 2001 lincoln continental

Your vehicle was shipped with a sticker affixed to the engine compartment, illustrating proper belt threading for your vehicle. (Varies with optional equipment.)

Oct 02, 2014 | 2001 Lincoln Continental

1 Answer

Im trying to put a belt on a 1998 lincoln continetal

check serpentine belt diagram under hood. usually on valance. or go to the owners manual and find belt replacement

Oct 15, 2010 | 1998 Lincoln Continental

1 Answer

I need a diagram for a serpentine belt on a 1998 lincoln continental

you can go to Advance Auto Parts and they can print out the routing for you right there in the store. It's also found on Dayco's new packaging

Oct 06, 2010 | 1998 Lincoln Continental

1 Answer

1996 lincoln continental belt routing

Below is a link for the Serpentine Belt routing courtesy of Best of luck!

Sep 24, 2010 | 1996 Lincoln Continental

2 Answers

I need a diagram to replace serpentine belt on a

My sincere apologies for the delayed response.
I am personally going back to answer - unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at!
Again my apologies...

Feb 16, 2010 | 1998 Lincoln Continental

2 Answers



Accessory serpentine belt routing-3.0L engine

Accessory serpentine belt routing-3.8L engine

Oct 25, 2009 | 1998 Ford Windstar

1 Answer

Cannot route serpentine belt correctly for a 1998 Ford Taurus 3.0. Do you have a diagram I can see?


Serpentine drive belt routing-3.0L (OHV) engines

Serpentine drive belt routing-3.0L (DOHC) engines

Oct 25, 2009 | 1998 Ford Taurus

2 Answers

How do i get to the serpantine belt on 96 lincoln continental

Step 1 Inspect the belt already in your Lincoln for cracks or wear. It is best to replace serpentine belts early, before any major damage occurs, as a break in the belt will cause a critical failure in a motor vehicle while under power.
  • Step 2 Find the belt routing diagram under the hood, this can usually be found on the top of the radiator mount. Lincolns, even those of the same year model, may have different accessories run by the serpentine belt. So the exact routing of the belt will vary from vehicle to vehicle.
  • Step 3 Loosen the tensioner pulley until you can push it relatively easily. The belt should still be too tight remove, if it is not the idler pulley is malfunctioning.
  • Step 4 Unscrew the idler pulley belt until the idler pulley loosens enough to allow the belt to be removed.
  • Step 5 Make note of the direction of rotation of the serpentine belt as it is important to install the new belt in a way that it is intended to rotate.
  • Step 6 Insert the new belt in accordance with your Lincoln's belt installation chart.
  • Step 7 Tighten the idler and tensioner pulleys an assistant with a pry bar may be needed to properly tighten your Lincoln's serpentine belt.
  • Sep 24, 2009 | 1997 Lincoln Continental

    1 Answer

    I can't figure out how the serpentine belt routeing

    should be a diagram under the hood for that if not go too auto zone and look it up in there manual they will even print it out for you for free!!!!!!

    Apr 11, 2009 | 1998 Lincoln Continental

    Not finding what you are looking for?
    1998 Lincoln Continental Logo

    2,128 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lincoln Experts


    Level 3 Expert

    77932 Answers


    Level 3 Expert

    5648 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    Are you a Lincoln Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides