Question about 1999 Pontiac Grand Prix

1 Answer

My drivers side window will not roll up. The other 3 windows work fine. I pulled the fuse and put it back in. It still won't roll up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

Check for a broken wire in the wire harness that goes from car body to door.

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why want my power window on driver side want roll up the other 3 work fine ?


Bad Switch? Bad motor? Get a volt ohm meter out and test for power to and thru the switch. Pull the door panel and check the power and ground to the window motor

Sep 12, 2014 | Ford F-150 Cars & Trucks

3 Answers

The driver side window button does not roll the window up or down, but the other windows work fine. Could the problem be in the button or the motor?


Its the window switch. I stopped getting "clicking" action on my driver side/driver window button, so I switched it with one from a back window (meaning I couldnt roll down the back one from the driver side control anymore. This was temporary. I went to the junk yard and of 12 98/99 devilles, all of them had the switch pulled already. It is a pretty common problem I guess. New aftermarket cost around $80. All you need is a screwdriver to get at it, plug in the new one and you are fine.

Aug 20, 2010 | 1999 Cadillac DeVille

2 Answers

2006 mazda 6 just fitted a new battery now one touch power windows dont work


I had the same thing happen when I replaced my battery on my 2006 mazda 6. The program has to be re-programed and it is very simple. Simply push the window button down until window rolls all the way down, then pull up and roll window back up, but dont let go fo the window button for 3-5 seconds after window rolls back up all the way. This resets the program. Do it to both driver and passender side windows and do it with the key in the on position, but not with the motor started. Hope this helps ya

Aug 12, 2010 | 2006 Mazda 6

1 Answer

Drivers side window won't roll up


check for power at that window motor plug behind door panel while operating window switch. No power? replace window switch. Have power? replace motor.

Nov 28, 2009 | 2006 Dodge Stratus

2 Answers

The drivers side window auto up/down quit


1. Start the car and leave it idle.
2. Hold the window button down all the way, until the window is completely down.
3. Let go and push it down again and hold the window button for 2 to 3 seconds then let go. (You should be able to hear or feel (very faintly) the motor/sensor reset.)
4. Pull up on the window button and roll the window up until it is all the way up, when it is up let go.
5. Pull the button up again for 2 to 3 seconds. (You should be able to hear or feel (very faintly) the motor/sensor reset.)

Nov 02, 2009 | 2008 Honda Pilot

2 Answers

2000 dodge durango driver side window problem


I have had to replace three of the four window power regulators in my 2000 Durango. They just seem to stop working within a year or two of each other.

Aug 02, 2009 | 1999 Dodge Durango

2 Answers

2000 Ford expedition window problem


Sounds like you need a window motor. Try hitting in center of door trim panel to see if you can get it to work if so replace motor.

Jul 05, 2009 | Ford Expedition Cars & Trucks

1 Answer

97 Accord drivers side window won't go up or down....


Window motors & regulators go bad every day. Pull your door panel, unplug the motor, if you have an ohm meter apply the leads to the leads into the motor. One will be ground the other two will raise and lower (reverse) the motor. If you show resistance between the leads the motor windings are good and the problem may be the window regulator. If you do not have an ohm meter, you can run two wires (one ground, the other hot) and test the motor by applying elec to it.

Jul 02, 2009 | 1997 Honda Accord

2 Answers

Divers window won't roll up my Camry


No won't be fuse. My guess is there is something faulty with the main controller. You could probably verify this by trying the switch on right rear passenger door. If it works there then the problem is at the main controller in the driver door. Could be a loose wire or the switch itself is broken.

May 13, 2009 | 1986 Toyota Camry

Not finding what you are looking for?
1999 Pontiac Grand Prix Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...