Question about 2006 Chevrolet Silverado

2 Answers

2006 Chev Silverado 2500HD When filling at the gas pump I must slow the rate of gas or the pump triggers as if it is full. I have also had a problem with the EVAP code PO 449 emission system vent valve solenoid circut

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

Your evap vent filter is plugged. you can find it in front of the gas tank underneath. blow it out and it will be fine.

Posted on Jan 02, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You could try turning the nozzle upside down or sideways while you pump. The problem is probably caused by the gas hitting a bend in the fill tube and backing up to the nozzle causing it to think the tank is full and shut down.

Posted on Jan 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no oil pressure 1996 chev 2500


Oil pump faulty, or no oil left in crankcase.

Dec 03, 2013 | 2006 Chevrolet Silverado 2500HD 2WD

1 Answer

To pump gas into my 2005 chev truck is a very slow process. The nozzel will kick off unless you go very slow


The nozzle may be going too far into the tank. Try holding the nozzle about half way into the tank fill tube.

Feb 27, 2011 | 2005 Chevrolet Silverado

1 Answer

2005 chev silverado takes forever to pump a little fuel in gas tank


Not sure what you mean. Do you mean takes awhile to pump gas into tank? If so it's because that truck has a large gas tank compared to a smaller car or the gas station you regular has slow pumps. :s

Sep 05, 2010 | 2005 Chevrolet Silverado

2 Answers

2001 chev silverado. Filled up with gas started


My Dad had a 1999 Silverado that did the same thing, it's a bad design. You wont run out but keep track of your miles, Then you know how far you can go.

Apr 17, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

Power steering pump replacement on 2002 chev


u will need 2 special tool to remove and reinstall the powersteering pully
it must be removed to acess the bolts to replace the pump and a new pump dose not come with pully

Nov 26, 2009 | 2002 Chevrolet Silverado 2500HD

2 Answers

Fueling my 04 Silverado is slow???


check to make sure the top of your fuel tank is clear of mud or debris. Also check around your evap system which is right above the back axle of your pickup which is black plastic container. If you are dusty roads a lot this can become plugged off. There is a update at the dealerships for re-routing the vapor canisters on these pickups.

Sep 01, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

2007 chevy silverado slow filling gas tank


vent tube must be blocked off, check the tube first, thanks robert b.

Jun 16, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

Difficulty filling gas tank '06 Silverado 2500 HD 6.0 4x4 w/125K


Well come to the GM World. The filler tube to the gas tank is small and i find it to be the same on my Jimmy and my wife's Montana.
When filling, try starting off slow. Then gradually pull on the trigger more, as you fill the tank with gas. The fluid going in back's up with the air coming out. When you start off slow then pull on the trigger more you give the gas going in and air coming out time to create a path through that they can don't really interfere much with one another.
After a while you'll find a certain way (eather tilted to the left or right) to place the Gas pump nozzle in the filler tube to keep it from cutting off on you.
Good luck and hope this helps. If there is anything wrong with the EVAP. Charcoal canister, vacuum tubes or valve, your Service Engine light would go on. The ECM monitors all of that and would save a DTC in the ECM's memory to be retrieved by a technition's scanner.

May 09, 2009 | 2006 Chevrolet Silverado 2500HD 2WD

1 Answer

2006 gm rds radio is locked need to unlock it


I have a 6 disc AM/FM RDS Radio from a 2003 Chev Suburban that I purchased used and installed it into my 2003 Chev.Silverado and it went into lock up after I Installed it.How do I unlock it

Mar 29, 2009 | 2006 Chevrolet Silverado 2500HD 2WD

Not finding what you are looking for?
2006 Chevrolet Silverado Logo

734 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...