Question about 2004 Chrysler Sebring

Open Question

How to replace horn pad in sebring 2006 - 2004 Chrysler Sebring

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 251 Answers

SOURCE: I need help locating the horn on my 2006 Chrysler

lower right of engine compartment in front of tire behind plastic inner fender

Posted on Mar 04, 2010

Ad
  • 47 Answers

SOURCE: The horn on my 2006 sebring is going out. Is this a major fix?

It is located behind the right headlight assembly, remove that, one mounting bolt, and wiring harness, and it's out.
If you need anything else, let me know.

Posted on Mar 19, 2010

c1apton15
  • 3400 Answers

SOURCE: where can i buy a horn pad for my sebring

Ebay would be your best solution (and cheapest) or you might check with local salvage yard

Posted on Feb 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do i do if my horn does not work in my 2006 sebring convertable


check horn fuse and relay.if both good hot wire horn if it works the horn button pad need replacing meaning you have to replace the whole horn pad and airbag in the steering wheel.if horn dont work when hot wired more likely horn is bad.

Apr 17, 2013 | 2006 Chrysler Sebring

1 Answer

Car horn begins blaring when the car is not on and


In my case it turned out to be a bad horn pad on the steering wheel. It was especially bad when the weather was very cold. The horn would begin beeping in the middle of the night and wake me up, or begin beeping while I was driving. The dealership replaced it at no charge, so there must have been a recall for this problem. Good luck!

Aug 13, 2011 | 2006 Chrysler Sebring

1 Answer

I have a 2006 sebring conv. limited w/ six cyl engine. Recently, I honked the horn and it stayed ON. Repeated pressing and pounding would not deactivate the horn; it stopped upon pressing the 'Panic'...


I have the identical problem with the horn. I removed the horn fuse. The horn is linked to the air bag and cruise control and will have to be taken to a dealer I am told as my regular mechanic won't touch it. Apparently the whole steering unit may have to be replaced after a "diagnosis". I now have no horn. And no bill to pay..

Jan 04, 2011 | 2006 Chrysler Sebring

1 Answer

Where is the horn located? We have one sticking on. I pulled the relay


check horn relay, inspect horn pad/steering wheel pad for distortion

Oct 22, 2010 | 2006 Chrysler Sebring

1 Answer

I need help locating the horn on my 2006 Chrysler Sebring. I need to replace it.


lower right of engine compartment in front of tire behind plastic inner fender

Mar 03, 2010 | 2006 Chrysler Sebring

1 Answer

My horn does not work at all in my 2006 chrysler sebring and my inside lihgts also does not work


If your horn is not working and your inside light is not working either your fuse has been removed. (Located on the left side of the steering wheel) pull back the plastic handle and use the chart there to see if the fuses are all in the correct spots. If this is not the case you may have to have the fuse replaced. Lastly there could be and issue with your horn assembly which is easily fixed and the dome light could be a seperate problem.

Jan 12, 2010 | 2006 Chrysler Sebring

1 Answer

Cruise & horn don't work - can't find fuse


I have read that the "clock spring" cause this to happen

Apr 24, 2009 | 2006 Chrysler Sebring

5 Answers

My horn keeps going off at random times.


y horn on my Seabring would go off all by it's self. The dealership told me it was because we did not have a key fob to turn the security system off. We paid $120 to get the fob and have it programmed. The horn did not work except on the panic function of the key fob. I checked the fuse and relay and both were working. I was not getting voltage to the wire on the horn. I had the dealership look it over and they said I needed a new airbag for $600 plus labor. The problem was not in the airbag. The horn pad had a short in it caused by the tabs on the back of the Chrysler emblem that is located on the steering wheel cover. The prongs had made a hole through the horn pad. The horn pad is the switch that connects when you press the horn. To describe it imagine two pieces of copper foil much like aluminium foil. There is a microsopic thin layer of pourus plastic like membrane on each piece of foil. When you press the horn the foil makes contact.
THE FIX:
The tech had removed the airbag from the wheel. I did not have to pull that. Here is how to pull the air bag. There are two screws that hold the cruise controls on the steering whell. The are located on the back of the wheel. When those are removed you can remove the screws that hold the airbag. You will see them. I don't know what size of torx bits you need. Pull the bag our and disconnect all the wires. It will not blow up. Use a 10mm socket or wrench to remove four lock nuts. You will have to pry the metal cover off of the airbag cover. Be sure to bend the prongs back in for replacement. Now, Use a pair of side cutters or your choice tool to cut the holders that retain the horn pad. Pull the horn pad and cut the indented spots out. I used a single edged razor blade. Once the holes were made I used a pocket screw driver to open upt the horn pad. Don't damage the two foils. When you get an opening large enough to grab pull the two foils apart and use electricle tape to insulate the two inner sides of the foil where you made the cuts. Now put it back together. It took me a little over an hour. No shop will asume the responsibility to tamper with the airbag so you are on your own unless you want to pay me. I am an ASE Master Technician. Don't pay the $600 the shops want. It's already broken. What can it hurt?

Mar 25, 2009 | 2006 Chrysler Sebring

1 Answer

The horn on my 2006 sebring is going out. Is this a major fix?


It is located behind the right headlight assembly, remove that, one mounting bolt, and wiring harness, and it's out.
If you need anything else, let me know.

Mar 20, 2009 | 2006 Chrysler Sebring

1 Answer

2006 chrysler sebring- Radio controls on back of steering wheel


sounds like something wasn't hooked back up properly

Jan 02, 2009 | 2006 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...