Question about Ford Escape

2 Answers

2002 ford escape 3.0L DTC P0305and P0306 what would you ck

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

P0305 - Cylinder 5 Misfire Detected
P0306 - Cylinder 6 Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, The Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

When is the code detected?
- Engine Cylinder #5 and #6 is Misfiring.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation

Possible Causes:
- Improper spark plug at cylinder #5 and #6
- Insufficient compression at cylinder #5 and #6
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5 and #6
- Fuel injector #5 and #6 may be faulty
- Intake air leak at cyli

Possible Solution:
- Perform Injector Service
- Replaced Spark Plug #5 and #6
- Replaced Injector #5 and #6
- Replaced Ignition Coil #5 and #6

Hope helps.

Posted on Jan 02, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 870 Answers

P0305: Cylinder #5 misfiring detected.
P0306: Cylinder #6 Misfire detected.

Check your spark plug and the spark wires. on the Cylinder 5 and 6. God luck

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 ford taurus with codes B1155 P0306 P0316


Google the Codes

2002 ford taurus obd2 code B1155

The 306 is a misfire on #6 cyl

Disregard the 316

Feb 27, 2013 | 2002 Ford Taurus

1 Answer

What 's for DTC=p0306 in 2000 SONOMA 4.3L extended cab as a solution.


P0306 is a generic code for Cylinder 6 misfire.Check spark plug and wire.

Aug 22, 2012 | 2000 GMC Sonoma Extended Cab

1 Answer

I have a P0456 code on my 2003 Ford Expedition. Where is the vapor purge solenoid or the canister?


The information you are asking for varies depending on how the vehicle is equipped ie. ENGINE SIZE, AUTOMATIC or MANUAL TRANSMISSION, 2-WHEEL DRIVE, 4-WHEEL DRIVE, ALL-WHEEL DRIVE, etc.
With that said, it also deserves mention that there is a Technical Service Bulletin published by Ford Motor Company that applies to the model year and model that you have listed that involves Diagnostic Test Code (DTC) P0456.

Please note that this bulletin emphasizes the requirement of special equipment to properly diagnose and repair the DTC's listed in the bulletin. Below is a brief (partial) description of the bulletin:

Article No.
03-20-3
10/13/03
DRIVEABILITY - MALFUNCTION INDICAOR LAMP
(MIL) ILLUMINATED WITH DTC'S P0442, P0455,
P0456, P0457, P1442 OR CHECK FUEL CAP LAMP
ILLUMINATED WITH DTC P0457
FORD: 1997-2000 CONTOUR 1997-2002 ESCORT 1997-2003 CROWN VICTORIA, MUSTANG, TAURUS 1998-2003 ESCORT ZX2 2000-2003 FOCUS 2002-2003 THUNDERBIRD1997 F-250 HD
1997-1999 F-250 LD
1997-2003 E SERIES, EXPEDITION, EXPLORER, F-150, RANGER, WINDSTAR
1999-2003 F SUPER DUTY
2000-2003 EXCURSION
2001-2003 ESCAPE, EXPLORER SPORT TRAC, EXPLORER SPORT
LINCOLN:
1997-1998 MARK VIII
1997-2002 CONTINENTAL
1997-2003 TOWN CAR
2000-2003 LS
1998-2003 NAVIGATOR
2002-2003 BLACKWOOD
MERCURY:
1997-1999 TRACER
1997-2000 MYSTIQUE
1997-2003 GRAND MARQUIS, SABLE
1999-2002 COUGAR
1997-2003 MOUNTAINEER
This article supersedes TSB 03-9-8 to update the vehicle lines and Service Procedures.
ISSUE
Some vehicles may exhibit a Malfunction Indicator Lamp (MIL) illuminated with Diagnostic Trouble Codes (DTCs) P0442, P0455, P0456, P0457 or P1442 or a "Check Fuel Cap" Lamp illuminated with DTC P0457 for the Evaporative Emission System. This may be caused by loose or leaking hoses, loose or broken fuel cap, a leak at the top of the fuel filler pipe neck, etc.
ACTION
Use the Rotunda Leak Detector Smoke Machine (Part 218-00001) or equivalent, to locate and repair leaks in the Evaporative Emission System.

Oct 14, 2011 | 2003 Ford Expedition

1 Answer

I have a 2002 Jaguar X-type. The check engine light came on and it has been acting jumpy/shaky. I recently took it to be diagnosed and the codes I recieved back were P1314, P1316, P1111, and P0302..What do...


All fault codes can be checked out at http://www.bluejag.co.uk but here are the results for some of yours. You can ignor P1111. Looks like a faulty plug or coil pack cylinder 2

Fault Code:- P1314 Indicates a Power-train fault


The fault is generally due to a problem in the Ignition or Misfire area


Fault Description: Misfire rate catalyst damage -bank 2 NOTE: This DTC will flag only when accompanied by an individual cylinder misfire DTC: P0300 - P0306

Action of ECM:- ECM Default:- Maximum engine speed reduced


After clearing the DTC, complete the Misfire monitor drive cycle
Check for a reoccurrence of fault DTC.


Possible Fault:- Cylinder compression low Worn camshaft / broken valve spring(s) Fuel delivery pressure (low / high) Fuel injector(s) restricted / leaking Fuel injector(s) continuously open Fuel contamination Fuel injector circuit fault(s) (Injector DTCs also flagged) Spark plug failure / fouled / incorrect gap ECM to ignition coil primary circuit fault (Cylinder misfire detected DTC also flagged) Ignition coil failure
Fault Code:- P1316 Indicates a Power-train fault


The fault is generally due to a problem in the Ignition or Misfire area


Fault Description: Misfire excess emission NOTE: This DTC will flag only when accompanied by an individual cylinder misfire DTC: P0300 - P0306

Action of ECM:- none


After clearing the DTC, complete the Misfire monitor drive cycle
Check for a reoccurrence of fault DTC.


Possible Fault:- Cylinder compression low Worn camshaft / broken valve spring(s) Fuel delivery pressure (low / high) Fuel injector(s) restricted / leaking Fuel injector(s) continuously open Fuel contamination Fuel injector circuit fault(s) (Injector DTCs also flagged) Spark plug failure / fouled / incorrect gap ECM to ignition coil primary circuit fault (Cylinder misfire detected DTC also flagged) Ignition coil failure

Fault Code:-
P0302 Indicates a Power-train fault


The fault is generally due to a problem in the Ignition or Misfire area


Fault Description: Misfire detected ?€" cylinder 2

Action of ECM:- none


After clearing the DTC, complete the Misfire monitor drive cycle
Check for a reoccurrence of fault DTC.


Possible Fault:- Refer to P0300 Possible Causes

Aug 25, 2011 | 2002 Jaguar X-Type

1 Answer

Checked dtc codes in my ford ranger, found p1401 manufacturer control auxilary emissions control, p0304 p0306 cylinder 4 and 6 misfires. egr valve has been replaced


Check and / or replace plugs, wires, distributor cap, coil / coilpack

Change plugs especially if you have over 50k miles on them.
Wires can sometimes have cracks in them causing misfire.

Hope this helps...

Aug 03, 2011 | Ford Ranger Cars & Trucks

3 Answers

Cylinder 5 misfire


l don't now locate cylinder 5 front or rear

Feb 13, 2011 | 2002 Ford Escape

1 Answer

2003 ford escape. 75,000 miles on it. Sputters


What engine do you have?
I have a 2002 Escape with 3.0 V6. It sounds like the ignition is getting damp and the engine is misfiring. If the CEL is flashing, you really shouldn't be driving it. Check the owners manual, but you could damage the engine.
Anyway, go to an Autozone or other parts store. Many will scan your engine for the DTC code for free. This code will give you a clue.
My code was for a for a cylinder misfire. I was close to 100,000 miles, so I replaced the plugs first, then the one coil. It was the coil.

Oct 18, 2009 | 2003 Ford Escape

1 Answer

Looking for cylinder diagram/location on 2001 Ford Escape 6 cyl


here's the scoop. There is a TSB that addresses this issue.
First, replace the spark plugs.
Next, replace all 6 COPS, coil on plug. You have to because they feed back into the PCM, Powertrain Control Module and blow the drivers. Then you need to replace the PCM.

This was for 2004-06, but it might apply to yours if it's a 3.0L.
buy at tascafordparts.com.

Misfire DTC codes identify which cylinder is misfiring.

Misfire Detection Monitor The Misfire Detection Monitor is an on-board strategy designed to monitor engine misfire and identify the specific cylinder in which the misfire has occurred. Misfire is defined as lack of combustion in a cylinder due to absence of spark, poor fuel metering, poor compression, or any other cause. The Misfire Detection Monitor will be enabled only when certain base engine conditions are first satisfied. Input from the ECT or CHT, MAF and CKP sensors is required to enable the monitor. The Misfire Detection Monitor is also performed during on demand self-test.
  1. The PCM synchronized ignition spark is based on information received from the CKP sensor. The CKP signal generated is also the main input used in determining cylinder misfire.
  1. The input signal generated by the CKP sensor is derived by sensing the passage of teeth from the crankshaft position wheel mounted on the end of the crankshaft.
  1. The input signal to the PCM is then used to calculate the time between CKP edges and also crankshaft rotational velocity and acceleration. By comparing the accelerations of each cylinder event, the power loss of each cylinder is determined. When the power loss of a particular cylinder is sufficiently less than a calibrated value and other criteria is met, then the suspect cylinder is determined to have misfired.
  1. Misfire type A:

    Upon detection of a Misfire type A (200 revolutions) which would cause catalyst damage, the MIL will blink once per second during the actual misfire, and a DTC will be stored.

    Misfire type B:

    Upon detection of a Misfire type B (1000 revolutions) which will exceed the emissions threshold or cause a vehicle to fail an inspection and maintenance tailpipe emissions test, the MIL will illuminate and a DTC will be stored.

    The DTC associated with multiple cylinder misfire for a Type A or Type B misfire is DTC P0300.

    The DTCs associated with an individual cylinder misfire for a Type A or Type B misfire are DTCs P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0309 and P0310.

Dec 18, 2008 | 2001 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,960 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...