Question about 1993 Chevrolet S-10 Blazer

1 Answer

Chevrolet Blazer S10 1993

Hello, I need the wiring (electric diagram) of the Dashboard (Instrument Panel) for a Chevrolet Blazer S10 1993.

Could you help me?

Rgds,
Mauricio

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I recomend getting a book from the auto parts store. it will have all the electrical diagrams. it costs less than $20.00 and will be a good investment. i have a book for all my cars and have never had to go to a shop.

Posted on Jul 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse location that powers the instrument panel on a 2007 chevy silverado


Here you can look it up , may like to have this for future reference ! http://bbbind.com/free_tsb.html free wiring diagrams an fuse box diagrams as well . When you click on this blue link I copied , click on wiring diagrams , not TSB'S ! You may want to check them out later ! TSB'S are technical service bulletins .Well ant way ,after you click on wiring diagrams enter your vehicle info. , year , make , model , engine size . Then under system click on electrical distribution , under subsystem click on fuse panel .Then click search . Two blue links will show , click one at a time till you find what your looking for .

Oct 08, 2016 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Need wiring diagram for 2000 blazer4wd speedometer wiring


Haynes actually have a pretty good schematic in the section labeled Body Electric. If that is confusing to you, take your time, you'll understand it when you see it in front of you. good luck, and Thank Yo for using FixYa.com for help! GO HERE:
www.fixya.com/f/landing/tagspage/blazer_wiring_diagrams?cmpid=20140714&gclid=CInSyvGq7cACFUoS7AodfW4AWQ

Aug 30, 2014 | 2000 Chevrolet Blazer

1 Answer

Zafira fuse panel diagram


General advice:
Ceck all fuses.One at a time, not to get confused.
All dashboard have main plugs behind if u deal accesing it.Bad chasis grounded dash.
Cheers,if u figure it out,share.
Dumb guess:by (easy)tapping the top of the dash u may get results,use the tehnique on your own risk.

Oct 27, 2013 | Chevrolet Cars & Trucks

1 Answer

97 blazer factory radio removal


1997 Chevy Blazer radio pull out.
emissionwiz_126.gif
  • Remove the screws that retain the instrument panel accessory trim plate to the instrument panel.
  • Remove the instrument panel accessory trim plate.
  • Disconnect the electrical connectors, as needed.
  • Remove and retain the control switches.



  • emissionwiz_127.gif
  • Remove the radio mounting screws.
  • Remove the radio.
  • Disconnect the electrical connector and the antenna lead.


  • Reverse to reinstall.

    Oct 24, 2011 | 1997 Chevrolet Blazer

    1 Answer

    How do I remove dashboard to get to instrument panel to replace bulbs?


    You will need a cross point screw driver

  • 1 Remove the two screws on the underside of the top of the trim panel surrounding the dash and instrument panel.
  • 2 Pull the trim piece off the dash.
  • 3 Remove the four screws that hold the instrument panel in the dashboard using a cross point screwdriver.
  • 4 Slide the dashboard instrument panel forward and disconnect the electrical connector from the back of the dashboard.
  • 5 Turn the instrument panel over.
  • 6 Turn the base of the dashboard light bulb counterclockwise to unlock it from the instrument panel and pull it out of the panel to remove it.
  • 7 Insert a new light bulb into the back of the panel, and turn the bulb clockwise to lock it into the panel.
  • 8 Plug the electrical connector back into the instrument panel and slide the panel back into the dashboard.
  • 9 Secure the panel with the factory mounting screws and replace the trim and trim-mounting screws using a screwdriver.
  • Nov 23, 2010 | 1999 Toyota Sienna

    2 Answers

    My 96 blazer keeps blowing gauge fuse which is a 10 amp but it has also blown 30 amp fuses,please help


    unplug the instrument cluster. If it now does not blow, replace the instrument cluster. If it stll blows then you need to trace the wire in the loom looking for where it touches metal or have several wires melted together.

    Mar 19, 2010 | 1996 Chevrolet Blazer

    1 Answer

    Dash board is digital and the dash lights went out seeking information on how to remove the dash board console 1993 chevy blazer tahoe LT


    Remove the 5 mounting screws from the instrument cluster trim plate and remove the trim plate. Remove the 4 mounting screws from the instrument panel face plate and remove the face plate.Remove the instrument light grid from the center of the cluster. From behind the instrument cluster reach behind the speedometer and disconnect the speedometer cable by releasing the tab. Pull the cluster forward just enough to detach the "check engine" light bulb from the center of the cluster. Remove the instrument cluster from the dashboard.

    Jan 13, 2010 | 1993 Chevrolet S-10 Blazer

    1 Answer

    Puttransmission in blazer 4wheel drive need


    autozone sites has free diagrams,look online. or go to a napa store and theyll print for you. that sensor is the only 2 wire plug in the trans harness. it should be on the output of the transfer case

    Aug 24, 2009 | 2000 Chevrolet Blazer

    Not finding what you are looking for?
    1993 Chevrolet S-10 Blazer Logo

    581 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    60667 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21936 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...