Question about 1993 Ford F250

1 Answer

Drove it to work and now it does not start. I have always been able to hear the fuel pump and for the past few days I have not heard it....could it be the fuse...its dark out and I will be checking it in the morning to go home from work!

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 784 Answers

Yes, it could be the fuse or it could be the pump itself.
check the fuse and then check for 12 volts at the pump itself.

c...

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

So my fuel pump has been making a high pitched noise for a while. Then one day, without warning, I tried to start the car but it wouldn't. It cranked but would not start. I turned the car on (not start)...


I looked at info for 3.1L vinM Buick regal. fuel pressure key on engine off, 40.5--47 psi. Can you check the vin? The fuel pressure specs I have for 3.8L engine are even higher than the 3.1L.
You will get a fuel pump prime, key on engine off. You need to make sure fuel pump runs with engine cranking.
My hearing is no good, I can't hear fuel pump with engine cranking.
Sometimes If fuel pump brushes are bad, the fuel pump may run intermittently. Sometimes you can bang on bottom of gas tank when trying to start and the fuel pump will take off running.

Apr 15, 2017 | Buick Regal Cars & Trucks

1 Answer

Fuel pump relay fuse


check the asd relay and computer out puts make sure they are working

Oct 10, 2013 | Jeep Wrangler Cars & Trucks

1 Answer

1997 Ford F250 4.6L. Went to leave for work 2 weeks ago and wouldn't start. It would crank, but not start. Left it for a couple days, about 4 days and then tried it and it started. So I cut it off and let...


If you don't hear the pump running, it's likely not the fuel filter. However, you'll need to determine if the pump is getting power when it will not start. There should be a fuel pump inertia switch identified in the owner's manual. It's likely near the passenger side kick panel inside the truck. This is typically a convenient place to check for voltage from the fuel pump relay to make sure voltage is getting to and through the switch. There have been a fair number of folks that have had issues with the inertia switch failing. If you have voltage through the switch for about a second after the ignition switch is first turned to the Run or Start position, then you need to find out if the power is making it to the fuel pump. If there is no voltage to the inertia switch immediately after they key is turned to Run/Start, then you need to work towards the battery.

-Rod

Apr 04, 2017 | Cars & Trucks

4 Answers

1998 gmc jimmie 4.3, 2 wd. wont start. getting no gas at the fuel bleeder valve. has new fuel pump and new fuel filter. started and ran fine after new pump and filter install. drove 15 miles and parked all...


Check to see if fuel is getting to the filter. Maybe too much dirt in lines & plugged filter? If fuel at filter, put hose in place of filter JUST LONG enough to see if fuel is getting to fuel rail.

Mar 15, 2011 | 1998 GMC Jimmy

1 Answer

1996 Explorer ran fine then wouldn't start one day. Tries to turn over but won't catch. Tried jumping, that doesn't work. PCM relay and fuel pump relay are both fine, assumed it was the fuel pump. Replaced...


The fuel pump wires are positive: pink/black and negative=black. Pull the connector, turn the key on, and check these with a test light. Your pump power runs through the PCM.

2aced27.gif

Oct 11, 2010 | 1996 Ford Explorer

1 Answer

Power fadded over a few days now its dead. Fuel Pump?


It's quite possible to ruin a fuel pump by letting it run dry, especially if it already has years of use. When you first turn on the key, leave the door open and see if you can hear a high pitched whine for about three seconds. That would be the pump priming the system. If you don't hear it, then the pump isn't working. Be sure to turn the key of for about 10 seconds before you try listenng again(it has to reset). It can be hard to hear, especially over the key buzzer.

Feb 18, 2010 | 1993 Jeep Grand Cherokee

1 Answer

Car died on me the other day. tried to restart


It seems to me as though you have a fuel pump problem. Very common problem in these type vans. The fuel pump units on these come as an assembly inside the fuel tank. Might sound a bit silly to you but a lot of times you can take a hammer or something and tap the tank from under neith and it will start for a few minutes. As far as the security system a lot of them are designed to disable the vehicle from getting spark however some do disable the fuel pump as well but not after a few miles it will happen instantly. Good Luck swiftautorepairs.com

Oct 01, 2009 | 2001 Chrysler Town & Country

1 Answer

Doesn't want to start - 2001 Pontiac Grand AM SE


Have you changed the fuel filter lately? If not change it!

Sep 18, 2009 | 2001 Pontiac Grand Am SE

1 Answer

Trouble starting past few days, now it wont


sence you have had bad gas you will need to replace the inine fuel filter this should fix the starting problem but i would beleave you have a O2 sensor that needs to be replaced

Dec 07, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
1993 Ford F250 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...