Question about 1990 Toyota Land Cruiser

2 Answers

Brake booster How do I repair a Brake Booster?  I have the kit but I need details of the steps to follow and if I need special tools. Thanks so much Juan Vasquez

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 72 Answers

Maybe don't repair, buy a new one brake booster , we can supply you all kinds of brake boosters , check at :
http://www.fiverhope.com/category-67-b0-Brake-booster.html

Posted on Jul 05, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 221 Answers

Don't try it yourself. Consult the Authorized Serviceman instead. Brake Impairment maybe Hazardous.

Posted on Jul 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need step by step instructions on how to Change a brake power booster on a 1999 gmc jimmy. Somebody told me that you need a special tool.


If it is like my 98 Silverado it is replaced with some degree of difficulty. I watched a video on you tube.

Mar 29, 2017 | 1999 GMC Jimmy

1 Answer

How to replace brake booster on 2005 Pontiac aztek


Step 1 - Locate the Brake Booster The brake booster is located adjacent to the master cylinder. There will be 4 mounting screws protruding through the booster. The booster is also attached to the brake pedal in the interior of the car. This is where you will start work in replacing the brake booster.
Step 2 - Remove the Brake Booster Start by locating the booster rod that goes through the firewall and is attached to the brake pedal on the interior of the car. Typically, there is a cotter pin that secures the rod to the pedal, but there may also be nuts. When removing any fasteners in the course of this job, make sure to retain the nuts, cotter pins, and various other fasteners as the new brake booster will not come with replacement fasteners.
Remove the fasteners, whether it is a cotter pin or nuts. Slide the rod off the brake pedal. Disconnect the vacuum brake line that connects to the booster. In the engine compartment, there are four bolts securing the booster to the master cylinder and firewall. Loosen and remove these nuts. Remove the nuts (there are usually 2 in addition to the 4 that have already been removed) that secure the brake booster to the master cylinder. Wiggle the brake booster away from the master cylinder. There is a seal between the two. You will need to keep this as the new part does not generally come with another one. Remove the brake booster.
Step 3 - Install the New Brake Booster Set the new brake booster on the four mounting screws. Tighten the nuts on the bolts to the master cylinder. Insert the push rod through the firewall. Start these by hand so that the threads are not ruined. Reattach the vacuum hose, then the nuts to the 4 mounting screws. Reattach the push rod to the brake pedal by whatever means it was originally secured with, whether by cotter pin or by bolts.
Step 4 - Bleed the Brakes You will need to bleed the brakes after replacing the brake booster

Jul 11, 2016 | 2005 Pontiac Aztek

2 Answers

Remove master cylinder


you will need the manual on this one , it has to be done right so as to not get air in thelines when completed

Jul 15, 2014 | 2006 Chrysler Pacifica

1 Answer

How to remove brake booster on 1999 Toyota Camry


The following steps will help you to replace a Toyota Camry brake booster :
1 With the engine off, step on the brake pedal several times to relieve the brake booster of vacuum.
2 Press the brake pedal down and start the engine. Verify that the brake pedal sinks slightly. Turn off engine.
3 Remove the vacuum hose from the brake booster.
4 Remove the brake lines from the master cylinder. Remove the master cylinder from the brake booster. Plug the fittings to prevent brake fluid seepage.
5 Disconnect the brake pedal from the push rod.
6 Have an assistant hold the brake booster from inside the engine compartment. Remove the nuts that hold the brake booster to the firewall. These nuts are usually located under the dash on the interior of the firewall.
7 Remove the brake booster.
8 Install the new brake booster to the firewall. Tighten the mounting nuts.
9 Connect the push rod to the brake pedal.
10 Connect the vacuum hose to the brake booster.
11 Attach the master cylinder to the new brake booster and reconnect the brake lines.
.12 Bleed the brakes at the master cylinder.

Oct 04, 2013 | Cars & Trucks

1 Answer

2002 jaguar x type how do remover brake booster hoes connector from the manifold


Check the help link below and follow the procedure:----

How to replace Brake Power Booster?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

---------

Where is Power Brake Booster located on Car?

http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html

---------

How to Replace Power Brake Booster on 1996 GMC Jimmy?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-power-brake-booster-on.html

---------
These will help.
Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

I need detailed instructions on how to replace a brake booster


remove first all the metal tube.. the check valve and hose connected to booster body.. this is on the engine area..catch all the fluid that goes out from the metal tube...now , in the driver side the brake pedal ..there is a rod locked to the arm of the pedal brake.. this rod is connected to the booster. once the rod is unlocked from the pedal arm . remove the nuts on the wall body where the booster is leaning on the wall body.. these nuts are partner of the bolts inside the booster.once these nuts are out the booster is ready to get out. To install do the opposite step by step.. and bleed the metal tube till the brake is functioning good if not go under the bleeder screws on each tire and do the bleeding procedure with someone pressing the brake pedal. hope this will do .

Aug 19, 2011 | Mazda Tribute Cars & Trucks

1 Answer

How do i replace a power brake booster on a 97 ford taurus


  1. Step 1 Mark the brake lines coming into and out of the master cylinder using masking tape and permanent marker.
  2. Step 2 Orient the tube wrench so that it grabs the end of the nut by first sliding it over the brake line.
  3. Step 3 Pull the brake lines out of the master cylinder.
  4. Step 4 Unbolt the two bolts that hold the master cylinder to the brake booster.
  5. Step 5 Slide the master cylinder off the brake booster.
  6. Step 6 Remove the bolts that hold the brake booster to the firewall.
  7. Step 7 Remove the cotter pin from the pin holding the back of the brake pedal to the master cylinder.
  8. Step 8 Slide the brake booster to brake pedal pin out of the mounting bracket.
  9. Step 9 Pull the brake booster off the firewall.
  10. Step 10 Install the new brake booster. Installation is the reverse of removal.

Apr 24, 2010 | 1997 Ford Taurus

1 Answer

Any info on changing a brake booster on a 1996 Sierra and also help trouble shooting a master cy. Thanxlinder


a defective master has just one common symptom, a soft sinking pedal.
Instructions Things You'll Need:
  • Nose pliers
  • Ratchet and socket
  • Ratchet extension
  • Slip joint pliers
  • Wrench
  • New cotter pin
    Removing the Old Brake Booster
  1. Step 1 Park your car in a safe place with enough room to work around the front and driver side of the vehicle.
  2. Step 2 Locate the booster push rod connected to the brake pedal.
  3. Step 3 Remove the cotter pin securing the booster push rod pin to the brake pedal using a pair of nose pliers.
  4. Step 4 Release the push rod pin from the brake pedal and slide the push rod off the brake pedal.
  5. Step 5 Unscrew the four mounting nuts off the brake booster studs using a ratchet, ratchet extension and socket. You should be able to see the four booster studs extending through the firewall, in front of the brake pedal.
  6. Step 6 Disconnect the vacuum hose from the brake booster, working from the engine compartment. Use a pair of slip joint pliers.
  7. Step 7 Remove the two nuts holding the brake master cylinder to the brake booster. Use a wrench or ratchet and socket.
  8. Step 8 Separate the brake master cylinder from the booster just enough to make room for booster removal.
  9. Step 9 Pull the brake booster off the firewall and remove it from the vehicle.
    Installing the New Brake Booster
  10. Step 1 Set the new booster in place by sliding the push rod and four mounting studs through the mounting holes on the firewall.
  11. Step 2 Slide the brake master cylinder flange over the two mounting studs on the brake booster.
  12. Step 3 Start the two brake master cylinder mounting nuts by hand to avoid damage to the threads.
  13. Step 4 Tighten the two brake master cylinder mounting nuts using a wrench or ratchet and socket.
  14. Step 5 Connect the vacuum hose to the brake booster.
  15. Step 6 Screw the four mounting nuts to the brake booster working from inside the vehicle. Start the nuts by hand to avoid damaging the threads.
  16. Step 7 Tighten the four mounting nuts using the ratchet, ratchet extension and socket.
  17. Step 8 Position the brake booster push rod over the brake pedal and slide the push rod pin.
  18. Step 9 Install a new cotter pin to secure the booster push rod to the brake pedal

Nov 20, 2009 | 1996 GMC Sierra

1 Answer

Replacing power brake booster


You don't need to remove the pedal to get the booster off,it just slides inside,so when the booster is unhooked it will just pull out.



Please rate this a fixya.

May 17, 2009 | 1996 Chevrolet Suburban

Not finding what you are looking for?
1990 Toyota Land Cruiser Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...