Question about 2004 Ford Explorer Sport Trac

Open Question

My overhead dome lights won't come on when I open the door to my 2004 Ford Explorer Sport Trac XLT. They come when I turn them on manually, but not when I'm unlocking the door or opening the door. Could this be a fuse or something, or am I going to have to take it to a shop? Thanks. JC

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Changing front brake pads on a 2004 Ford Explorer Sport Trac

I'm guessing you have disc brakes in the front of the Explorer. If so, you need to unscrew the two bolts that hold the caliper on.(they'll be either hex or allen bolts) If the caliper does not slide off, take a C=clanp and slowly back the piston down on the caliper. This should free up the caliper so that it can be removed. Make sure you grease the slider pins for the caliper when you reassenble.

Posted on Dec 30, 2008

Ad
chuck943
  • 783 Answers

SOURCE: 2007 FORD EXPLORER SPORT TRAC 4X4 Change oil light on

Press and hold the SELECT/RESET
control switch to select SYSTEM
CHECK when “SYSTEM CHECK /
HOLD RESET” is displayed in the
message center. Selecting this
function from the SETUP MENU
causes the message center to cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
Pressing the SELECT/RESET control switch cycles the message center
through each of the systems being monitored.

The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
4. DOOR AJAR
5. EXTERIOR LAMP
6. BRAKE SYSTEM
7. PARK BRAKE
8. MILES TO EMPTY
9. FUEL LEVEL LOW (will only display if 50 miles or less to empty)
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:
1. Enter SYSTEM CHECK to display
“OIL XXX% RESET IF NEW”.
2. Press SELECT/RESET control
switch to display “HOLD RESET IF
NEW OIL”.
3. Press and hold the
SELECT/RESET control switch for
more than 2 seconds. Oil life is set
to 100% and “OIL CHANGE SET TO
100%” is displayed.

Posted on Apr 02, 2009

  • 5546 Answers

SOURCE: 2004 FORD EXPLORER SPORT TRAC POWER WINDOWS AND

Look in the owners manual and see if they have a circuit breaker or relay instead of a fuse. It could be bad and you would not see it.

Posted on Jul 23, 2009

morse008
  • 1111 Answers

SOURCE: Change spark plug wires on a 2004 Sport Trac

through the wheel wells

Posted on Aug 22, 2009

  • 1 Answer

SOURCE: 01 ford explorer sport trac rear timing chain diagram

They will not loan you the tools.....how else will they continue to rip off the average garage junkie and make lots of money?

Posted on Nov 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse panel box diagram for 2010 explorer sports trac


g06304730
F5 5 Rear window motor. Roof opening panel module. Auto-dimming interior mirror unit. Door lock switch, driver side. Door lock switch passenger side. Power window motor, driver side front. Overhead console switch assembly
Not sure if this is what you're looking for. Let me know if it works.

Jul 18, 2014 | 2010 Ford Explorer Sport Trac

2 Answers

Why does a wrench sign appears on the dashboard


Wrench light is a service due light and comes on every 10,000 klms. To reset light hold trip meter reset button in and turn on ignition whilst remaining hold on button for approx 10 seconds. spanner light will go out

Nov 24, 2012 | 2007 Ford Explorer Sport Trac

1 Answer

Was there ever a recall on 2004 exp.sport tracks? (domelight)


Hello. There was a recall on this vehicle's exterior lighting but not on the dome light. here is a link to the recalls http://www.automobilemag.com/am/2004/ford/explorer_sport_trac/recalls.html
Regards, Joe
PS please rate my answer. Thank you.

Jan 05, 2010 | 2004 Ford Explorer Sport Trac

1 Answer

I have a 2007 sport trac with the overhead console and sun roof. i would like to change the map lights but after removing the lens it looks like i may have to remove the whole console just to replace the...


Looks like it is pretty easily removed.

Use a small screw driver and pry open the garage door opener storage bin. You will see 1 screw there that you will remove.
Pull the front of the overhead console down and remove the console from the console retaining clips.

Feb 22, 2009 | 2007 Ford Explorer Sport Trac

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...