Question about 2006 Pontiac Grand Prix

Open Question

Replacing spark plugs. when and what type - 2006 Pontiac Grand Prix

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spark plug gap


How to Gap a Spark Plug - YouTube

? 2:57
https://www.youtube.com/watch?v=IuW3svdqKZM
Oct 15, 2012 - Uploaded by ChrisFix
How to correctly gap a spark plug. This is a fast and easy video on how to gap a spark plug and spark plug gap ...

FAQ: Find My Engine Spark Plug & Gap ' Briggs & Stratton

www.briggsandstratton.com/.../identifying-the-correct-s...

Briggs & StrattonFollow this step-by-step image guide to locate spark plugs in different Briggs & Stratton engine types. ... Spark Plug Type & Gap Chart for Briggs & Stratton Engines. Now that you've found the part you'd like to replace, you can use the chart below to identify the genuine Briggs & ...

Spark Plug Gap - AutoZone



Dec 15, 2015 | Cars & Trucks

2 Answers

Why does it cost so much for the spark plug replacement and when do you suggest that it be done?


remember your going to a mechanic shop $$$$ that's why / next go to 2007kia Sorrento owners manual and download it the mileage maintenance recommendations are in there

Feb 25, 2015 | 2007 Kia Sorento LX

1 Answer

How to replace spark pluges in a 2003 cadillac deville northstar engine


With alot of hard work - Just kidding. You might find the answer at "justanswer.com". Or type your question into your Computer search engine. You'll probably need a swivel type spark plug wrench, as the plugs on many cars are hard to reach.
http://justanswer.com/

Aug 12, 2014 | 2003 Cadillac Deville

1 Answer

I need to change my rear spark plugs


  1. Disconnect the negative battery cable. Wait at least 90 seconds before performing any other work.
  2. Remove the ignition coil(s). The Spark Plugs are underneath the Coils
  3. Using a 0.63 inch (16mm) plug wrench, remove the spark plug
  4. CAUTION== Replace your Spark Plugs with the Original Type Plug Brand Name and Spark Plug Number OR you will have Problems with PRE-INGNITION: DON'T SUBSTITUTE to Any other Type Spark Plug. You might have to get them at the Dealer Ship.

Feb 04, 2012 | 2004 Lexus ES 330

1 Answer

What is the proper gap for spark plugs for an 04 audi A4quattro 3.0


Spark plugs for the Audi A4 Quattro 3.0 V6
Spark plugs - Original equipment: NGK
Type: BKR6EKUB
Spark plugs make: Beru
Type: 14FGR-6 DDU
Spark plugs make: Bosch
Type: FGR 7 DQEO
Spark plugs make: Champion
Type: RC89 TMC
Electrode gap: 0.8 mm (0.0315 inch)

Nov 13, 2010 | 2004 Audi A4

2 Answers

Remove and replace spark plugs


not to bad you'll need long extension, front one are there in view, the back one's remove spark plug boot (long one) and with extension you can reach spark plug's.

Dec 11, 2009 | 2000 Mazda MPV

1 Answer

I need a spark plug wire diagram for 1987 ford 302 crown vic


1987 Ford Crown Victoria 5.0L FI 8cyl

Duraspark Type Plug Wires
The spark plug wires used with the Duraspark type ignition system are 5 / 16 in. (8mm) in diameter to contain the higher output voltage. There are two types of wires used in this system, and some engines may have both types installed. It is important to properly identify the type of wire used for each cylinder before replacements are made.

Both types are blue in color and have silicone jacketing. The insulation material underneath the jacketing on some plug wires is a silicone layer separated by glass braid. The plug cable not incorporating the silicone layer is used where engine temperatures are cooler and are identified with the letter SE with black printing. The plug cables with the silicone insulation are used where high engine temperatures are present. These cables are identified with the letters SS with white printing.
Each spark plug cable, if original, is marked with the cylinder number, model year and date of cable manufacture (quarter and year). Service replacement wires will not have cylinder numbers, or manufacture date.


On any vehicle equipped with a catalytic converter, never allow the engine to run for more than 30 seconds with a spark plug wire disconnected. Unburned fuel in the cylinder may ignite in the converter as it is exhausted and damage the converter.

When removing spark plug wires, mark and tag the individual wires. Grasp, then slowly, twist the insulator back and forth on the spark plug to free the insulator. Do not pull on the wire directly as it may become separated from the connector inside the insulator. Special tools are available which can help ease plug wire removal, and prevent damage to a cable.

When installing a new set of spark plug wires, replace the wires one at a time so there will be no confusion. Start by replacing the longest wire first. Route the wire exactly the same as the original.

6bd8840.jpg

Fig. 1: 6 cylinder engine-240Firing Order: 1-5-3-6-2-4Distributor Rotation: Clockwise

e1455b9.jpg

Fig. 2: 8 cylinder engine-255, 302, 351, 400Firing Order: 1-5-4-2-6-3-7-8Distributor Rotation: Counterclockwise

41629e9.jpg

Fig. 3: 8 cylinder engine-390, 427, 429, 460Firing Order: 1-3-7-2-6-5-4-8 DistributorRotation: Counterclockwise


Visit autozone.com (free register) for more details.

I hope helped (rememer rated this) Good luck.

Oct 15, 2009 | 1987 Ford Crown Victoria

1 Answer

Cost to replace spark plugs on 2003 maxima


you have 6 spark plugs, i would recommend the NGK v-power spark plugs for your car. the average cost on those type of plugs are $4.59 each so you would need 6 of them. i always replace spark plug wires everytime i buy new spark plugs however your particular car is what they call Coil-on-plug wires and are very expensive. you would have over $100.00 or so in 6 of these total, i would not replace these on your car unless you are having a major mis-fire and possibly need them.

Aug 10, 2009 | 2003 Nissan Maxima

2 Answers

How to replace sparl plugs on a Jeep Cherokee?


Hello, I hope this info helps...(subytech1)...REMOVAL
In this engine, each individual spark plug is located under each ignition coil.

  1. Prior to removing spark plug, spray compressed air around base ofignition coil at cylinder head. This will help prevent foreign materialfrom entering combustion chamber.
  2. On this engine each individual ignition coil must be removedto gain access to each spark plug. Refer to Ignition CoilRemoval/Installation.
  3. Check condition of coil O-ring and replace as necessary.
  1. Inspect spark plug condition. Refer to Spark Plug Conditions.
CLEANING
Theplugs may be cleaned using commercially available spark plug cleaningequipment. After cleaning, file center electrode flat with a smallpoint file or jewelers file before adjusting gap.

CAUTION: Never use a motorized wire wheel brush to clean sparkplugs. Metallic deposits will remain on spark plug insulator and willcause plug misfire.

ADJUSTMENT

Setting Spark Plug Gap - Typical
Check spark plug gap with a gap gauge tool. If the gap is not correct,adjust it by bending ground electrode. Never attempt to adjust gap bybending center electrode.

INSTALLATION

CAUTION: This engine is equipped with copper core groundelectrode spark plugs. They must be replaced with the same type/numberspark plug as the original. If another spark plug is substituted,pre-ignition will result.

Special care should be taken when installing spark plugs into cylinderhead spark plug wells. Be sure plugs do not drop into plug wells asground straps may be bent resulting in a change in plug gap, orelectrodes can be damaged.

Always tighten spark plugs to specified torque. Over tightening cancause distortion resulting in a change in spark plug gap or a crackedporcelain insulator.

  1. Start spark plug into cylinder head by hand to avoid cross threading.
  2. Tighten spark plugs to 27 Nm (20 ft. lbs.) torque.
  3. Before installing coil(s), check condition of coil O-ring andreplace as necessary. To aid in coil installation, apply silicone tocoil O-ring.
  4. Install ignition coil(s). Refer to Ignition Coil Removal/Installation.

Aug 07, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Spark plugs


hi.use a spark plug wrench.use resistor type spark plugs.do not use non resistor type park plugs. it easily gets busted.

Aug 11, 2008 | 1992 Nissan Maxima

Not finding what you are looking for?
2006 Pontiac Grand Prix Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...