Question about 1995 Chevrolet Monte Carlo

2 Answers

Where is shift solenoid located on 95 monte carlo z34

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 112 Answers

The transaxle shift solenoids are located in the transaxle.

Hope this helps, it it does please leave feedback and vote Thank You and Good Luck

Posted on Jan 02, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

On the monte carlo the shifing solenoid is located in the transmission pull the pan off the ****** and you will see it with an electrical connector attached to it two ten millimeter bolts hold it in place

Posted on Apr 14, 2012

  • brian stablein Apr 14, 2012

    on the monte carlo the shifing solenoid is located in the transmission pull the pan off the ****** and you will see it with an electrical connector attached to it two ten millimeter bolts hold it in place

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO REMOVE 4T60E TRANSMISSION FROM A 96 Z34 MONTE CARLO?


You don't have to pull it to replace the TCC. Remove the pan and you can access the TCC solenoid. 40b12bb6-08f8-4f1c-b959-9bfe6f7b08fb.gif

Aug 06, 2014 | 1996 Chevrolet Monte Carlo

1 Answer

96 Monte carlo z34 won't crank over unless I jump


Sounds like a problem with the key switch, probably the security system. You may only have power to the fuel pump when the engine is cranking.
Is the security light on or flashing ?

Jun 29, 2013 | Cars & Trucks

1 Answer

Engine diagram for the iat sensor location for 1995 3.4 monte carlo z34


For its exact location on your vehicle,click the link below:----
Chevy Monte Carlo IAT Location http://technoanswers.blogspot.com/2012/11/chevy-monte-carlo-iat-location.html

--------
These will help.
Thanks.

Nov 22, 2012 | Cars & Trucks

1 Answer

Cant find the relay switch for the gas. need to reset the relay button. find out where the location is. its a 95 monte carlo z34


The monte carlo does not have a inertia switch you have a relay that would need to be changed out which is located under the hood of the vehicle.

Jun 08, 2011 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

Where is the EVAP canister and solenoid sensor located on a 1997 monte carlo Z34


they are both located on the front of the engine along the fuel rail they are plug in to black hard lines and the bolt on to the intake

Jun 12, 2010 | 1997 Chevrolet Monte Carlo

1 Answer

Timing belt broke on our 95 z34 monte carlo. Is this an intreference motor? And do i have to replace the water pump, or can i get to it w/o going through the timing belt again?


If the car is a 95 it should be a freewheel non interference. if it's a late 95 or 96 then it is an interference. You will need to replace guide pullys and the tensoner. I will worn you it's a real pain to do. no room for your hands

Dec 02, 2009 | 1995 Chevrolet Monte Carlo

2 Answers

Looking for speedometer sencor location on a 95


It should be mounted in the transmission housing itself, near the output shaft, or possibly half way up a cable coming from the transmission.

Sep 09, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

My 1997 monte carlo z34 3.4 engin is holding high rpms


I had a similar problem on a 3.4 Lumina Z34. It was a leaking intake gasket. Be careful with the plastic vaccumn lines as they will get brittle.

Aug 01, 2009 | 1997 Chevrolet Monte Carlo

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

Related Topics:

881 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...