Question about Lexus ES 300

Open Question

Code P1346 and P1349, drives great upon start up but once the engine is warmed up it starts idling rough, if you put it in N the RPMs rev up to 2000 and then back down to about 800 still idling rough. I smelled a burning smell prior to all of this starting up, happened about the time I started having to use the heater and thought it was related to that - but may have been wrong - not really sure. I also received the codes for misfires on the 1, 3 and 5 plugs. Does this car have an EGR valve? Could it be the IACV or the OCV filter? Please let me know where I should start. Thank you!

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 197 Answers

SOURCE: codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough

P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Posted on Feb 15, 2011

pctech1
  • 1940 Answers

SOURCE: computer analysis showed these codes...

P0330 Knock Sensor 2 Circuit (Bank 2)
P1133 Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 1, Sensor 1)
P1135 Air/Fuel Ratio Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)
P1346 VVT Sensor Range/Performance Problem (Bank 1)
P1349 VVT System Malfunction (Bank 1)
P1351 Variable Valve Timing / CMP Sensor Range / Performance
P1354 Variable Valve Timing System Fault

NOTE:Variable Valve Timing (VVT) sensor is also known as camshaft position sensor.
The Variable Valve Timing (VVT) system controls intake valve timing in response to driving conditions.

Possible causes are:

  1. Incorrect valve timing P1346, P1349, P1351 & P1354
  2. Faulty oil control valve P1346, P1349, P1351 & P1354
  3. Faulty VVT controller assembly P1346, P1349, P1351 & P1354
  4. Faulty ECM All Codes
  5. Jumped timing belt All Codes
  6. Faulty Camshaft Position Sensor P1346, P1349, P1351 & P1354
  7. Faulty O2 Sensor (Bank 1, Sensor 1) P1133 & P1135

Posted on Apr 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1998 ford explorer 4.0 v6 idle


run fault codes and look for faults in idle sensor---MAF sensor

Aug 17, 2013 | Ford Cars & Trucks

1 Answer

2000 Oldsmobile Sillouette idles rough when warm


Why don't you get your ride check for engine error code? Getting the error code resolves almost every problem. Please update your answer with the error code you are getting (if any).

Jun 26, 2013 | 2000 Oldsmobile Silhouette

1 Answer

When i start the car it revs up to 2000 rpms or sruggles at around 200 or 300 rpms. After it warms up the problem seems to go away. Their is no check engine light on.


You have a vacume leak, and once the temp sensor starts to read after the warm up the ecm starts to control. I would also check IAC idle air control valve.

Sep 08, 2011 | Toyota Avalon Cars & Trucks

1 Answer

Check engine light on. Will not rev up over 2500 rpm. Fluctuates between 2000 and 2500 rpm and runs rough. Upon first start, you can rev fine and it runs smooth as long as you hold the rpms over 3000. ...


Hi, there are a lot of things that could cause this behavior, so it would help us to diagnose your problem if you could get a scan of the OBD2 connector and send us the trouble code. If you live in the US you can usually get a free scan at your local parts chain.

May 19, 2011 | 2004 Dodge Durango

2 Answers

Computer analysis showed these codes... P0330 P1133 P1135 P1346 P1349 P1351 P1354. can anyone tell me what each of these mean?


P0330 Knock Sensor 2 Circuit (Bank 2)
P1133 Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 1, Sensor 1)
P1135 Air/Fuel Ratio Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)
P1346 VVT Sensor Range/Performance Problem (Bank 1)
P1349 VVT System Malfunction (Bank 1)
P1351 Variable Valve Timing / CMP Sensor Range / Performance
P1354 Variable Valve Timing System Fault

NOTE:Variable Valve Timing (VVT) sensor is also known as camshaft position sensor.
The Variable Valve Timing (VVT) system controls intake valve timing in response to driving conditions.

Possible causes are:
  1. Incorrect valve timing P1346, P1349, P1351 & P1354
  2. Faulty oil control valve P1346, P1349, P1351 & P1354
  3. Faulty VVT controller assembly P1346, P1349, P1351 & P1354
  4. Faulty ECM All Codes
  5. Jumped timing belt All Codes
  6. Faulty Camshaft Position Sensor P1346, P1349, P1351 & P1354
  7. Faulty O2 Sensor (Bank 1, Sensor 1) P1133 & P1135

Apr 22, 2011 | 1999 Lexus ES 300

1 Answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998


P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Feb 14, 2011 | 1998 Lexus Gs 400

2 Answers

I have a 1994 Dodge Dakota, no power at low rpms


yes it does if it is reading lets say lower than normal that would explain easy start up and stalling later.the coolant temp sensor has two wires .so if your car warms up and your coolant is about 200 degrees your coolant sensor might say 80 degrees .access to a scanner to check temp would be great.

Mar 19, 2009 | 1994 Dodge Dakota Club Cab

2 Answers

V40 hard to start and will not idle unless I give it a little gas


We had the same problem and found it was the fuel pressure regulator. Upon replacing it no longer gives any hesitation at startup.

Mar 01, 2009 | 2000 Volvo V40

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...