Question about Hyundai Accent
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Check the coolant level, do this with a cold engine. Or if you have recently used it. let it cool down for about 25 minutes before removing the radiator cap. if it is low, refill with coolant. If it does not, check your thermostat. Or better yet replace your thermostat. Be sure to get the right one . the same degrees as your old one. Just ask the teller to give you one for your engine size and car Model.And year.See where the radiator cap is. Then drain some coolant to where it will not spill from the radiator cap. Remove the hose nearest the radiator cap and you will get to the thermostat housing. Remove the housing and note how the thermostat is placed. Take of the thermostat housing and the old thermostat. Clean the housing and around the hole where the thermostat goes of any deposits. Get some grease and cover the new gasket with grease on the housing to hold it in place. replace the New thermostat and make sure it is flush with the engine and the housing. If it is off , you could break the housing upon tightening the housing.replace the hose and refill with coolant slowly to eliminate any air spaces.. Also check the coolant reservoir and fill it to the indicator line. Restart the car and chek for any leaks. Then check the heater after the engine heats up. If that does not do the job it could be the temperature sensor or the heater core.The heater core will take more time to check and clean or replace.
Posted on Nov 26, 2008
remove door panel which is attached by screws,peel away plastic liner and look inside door at back of door handle..using needle nose pliers pop off the small steel rods that are for inside door mechanism,then remove the one bolt that attaches the handle to the inside of door and from outside of door remove handle.Replace in reverse order!
Posted on Jul 22, 2009
hi from uk the part you mention is the brake stop light switch it has a plug on 2xwire plug it operates by as pedal is pressed the plunger of switch moves out and connects the 2xwire circuit and so brake lights operate this switch simply unscrews from the pedal box/carriage after plug removed then the new switch screwed in place and with b/pedal off the switch is screwed to a point that if you press pedal down approx 1/2 " the switch plunger moves out and b/lights come on this is trial/error untill you are happy with the pedal movement down till lights operate SIMPLE ! hope this helps?
Posted on Nov 28, 2009
Testimonial: "thanks for the feedback, now all i need to find out is if I can buy this part? "
hi as this vehicle takes 6.5ltrs of liquid in the cooling system ( 1.6 16v based on ) as you did not give the engine size, but, 3.5ltrs of coolant is needed as it should be 50/50 depending on where you are and the temperature it has to deal with, warmer countries only need 30/70 That's 30 coolant to 70 water, but, if you are in a colder country it would be 80/20 that's 80 coolant to 20 water...and any standard coolant is ok no need for a specific one hope this helps please vote thanks
Posted on May 22, 2010
Tips for a great answer:
Oct 19, 2014 | 2003 Hyundai Accent
Dec 05, 2012 | 2003 Hyundai Accent
Dec 13, 2011 | 2003 Hyundai Accent
Mar 22, 2011 | 2003 Hyundai Accent
Sep 24, 2010 | 2003 Hyundai Accent
May 04, 2010 | 2003 Hyundai Accent
Apr 01, 2009 | 2003 Hyundai Accent
Mar 29, 2009 | 2003 Hyundai Accent
95 people viewed this question
Usually answered in minutes!