Question about 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2002 Ram No Tail lights, No power to the fuse for the left and right tail light, no back up or park Head ligts are one low one high beam no signals, Whats up?

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 298 Answers

The wiring of the car has some mistakes or some problems and as a result there is no power going to the fuse and it cannot power up the lights and all other electrical devices in the car. The best thing to do is to send it to an auto-repair shop and ask them to do a complete re-wiring because any attempt by an amateur is likely to lead to further damage of the car.
Hope this solution helped you? Please comment if you need more information and thank you for using Fixya.com

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost the fuse diagram for my dads 95 dodge grand caravan. Can anyone help me out with one?


#1: Panel Illumination
#2: Guages,Right High beam headlight and the high beam indicator
#3: Rear Wiper, Left headlight High Beam
#4: RH park, backup lights switch and relay,Speed porpotional steering module,power door lock switch illumination and daytime running lights(Canada)
#5: Power Door locks,Power Mirrors,vanity,dome,map,ignition and trunk lights,sunroof,radio,power antenna,body control module and power for the data link connector
#6:Heated mirrors,heated rear window indicator
#7: Instrument cluster illumination,park and tail lights
#8: Cigarette lighter,Radio Amp and horns
#9: Power door lock motors
#10: Not used
#11: Radio
#12:Left low beam head light
#13,14,15,16 not used
26153814-2qh1jtrzfrcszgktlooiom5o-3-0.jpg

Apr 05, 2016 | Dodge Cars & Trucks

1 Answer

Why wont the headights or running lights work on my 2002 Buick LaSabre?


There are several reasons why your headlamps an running lights don't work , the headlamp switch is a good one ,plus relays an the DIM - dash integrated module an associated wiring ! Here is how the headlamps work , right out of Buick factory service info !
The dash integration module (DIM) provides battery positive voltage to the signal circuits of the headlamp switch. The signal circuits include the headlamp switch headlamps on signal, the flash to pass switch signal and the high beam input. With the headlamp switch in the ON position, a ground path is available for the headlamp switch headlamps on signal circuit of the DIM through the headlamp switch. The DIM provides ground to either the headlamps high beam relay control circuit or the headlamps low beam relay control circuit of the low beam circuit. The position of the headlamp dimmer switch determines which relay control circuit has ground. The DIM supplies battery positive voltage to the relay control circuits, if the headlamps are necessary. The fuse block - underhood supplies battery positive voltage to both relay switch circuits. When the low beam relay control circuit is energized, current flow is to both low beam fuses and to the low beam headlamps. The headlamps have ground at G103 and at G401. When the headlamp high beam relay control circuit is energized, current flow is to both high beam fuses and to the high beam headlamps. The high beam circuit is divided into a left and right side circuit. The current flow of the left high beam is from the fuse to the left high beam lamp. From the lamp, the current flows to the normally-closed contact of the DRL relay to G103. The current flow of the right high beam is from the fuse to the right high beam lamp. From the lamp, the current flow is to ground at G401. When the headlamp dimmer switch lever is pulled toward the driver, the flash-to-pass switch closes. This grounds the DIM flash to pass switch signal circuit. In response to this input, the DIM energizes the HDLP HI BM relay. Both high beams remain on until the driver releases the switch handle. If the low beam headlamps were on during a flash to pass operation, the low beams remain on. The headlights may be switched to high beam with the opposite movement of the headlamp dimmer switch lever.
By running lights , do you mean park lamps or day time running lamps ?
Park, Tail, License and Marker Lamps
The park lamps, including the license lamps, are turned on when the headlamp switch is placed in the PARK or ON position or anytime the headlights are requested. The fuse block - rear supplies battery positive voltage to the switch contacts of the Park LP relay. When the headlamp switch is in PARK or in ON, the park lamp switch on signal circuit of the DIM has a ground path. The DIM provides battery positive voltage to the control circuit of the Park LP relay. When the park lamps and/or the tail lamps are ON, the DIM energizes the park lamp relay control circuit. This closes the switch contacts. Current flows from the Park LP relay to the LH PARK LP and the RH PARK LP fuses. From the fuse, the current flows to the park lamps. The left park lamps are grounded at G103, G401 and G402. The right park lamps and the right tail lamps are grounded at G103 and G401. The DIMR fuse supplies battery positive voltage to the license lamps and to the DIM instrument panel lamp fuse supply voltage - 1 circuit, for interior lamps dimming. The license lamps are grounded at G401.
The best advice I can give is that you take this to a ASE certified professional repair facility unless your a qualified automotive electric repair person !
Diagnostic Starting Point - Lighting Systems
Begin the system diagnosis with the Diagnostic System Check - Lighting Systems . The Diagnostic System Check will provide the following information:
?€¢
The identification of the control modules which command the system


?€¢
The ability of the control modules to communicate through the serial data circuit


?€¢
The identification of any stored diagnostic trouble codes (DTCs) and their status

The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.

The

Mar 15, 2015 | 2002 Buick LeSabre

1 Answer

97 Jeep Wrangler 4 cyl. Turn signals, headlights, parking lights, tail and brake lights, and instrument panel are all out. Only interior light above brake pedal is working. Engine will start.


i think you ment IP cluster backlights dead not warning ligts
that is real the huge parking light structures.
a blown fuse. it is, why not test them ? first.

either cab fuse or the engine bay fuse box.
12vdc on both sides of fuse, is a good fuse, key on.
100% accurate test. no guessing. ever with voltmeter.
(rare exceptions a car with a ground fuse, very rare)
so lets do this the hard way, no fuse tests......

but hark the fsm is free. why not just look at the road map er, schematic, (wiring diagrams)
lets do HL , they are hot all the time, keys lost .

your car is a TJ so having a TJ book is spiffy , no? KEEN?
lets do that. TJ wiring
click TJ
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

now click wiring, following me?
posted this 100 times,., here.

my guess is parks are dead High beams good, right, ?????
yes then go to JUMP 1.
HL dead highs and low beam? parks out.(aka TAIL)
PDF page # 92
fuse PDC #17 blown? kills cluster dead too
JUMP1: parks dead.
had lamps is fuse #1, jb (page 134 pdf)
then PDC fuse 4 and 10 (lows and highs)

PDC is engine bay box.
JB is cab box.

so my guess (hard way)
fuse 10 and CB 24 was blown. kills high/low beams
Fues1 and 4 only parks. and cluster dimmer feed.

page 134 makes all this childs play with a meter.
volt meter.

Feb 22, 2015 | Jeep Cars & Trucks

1 Answer

My daughters 1998 vw cabrio has a top that won't go up or down. i need to find the fuse for it. i know it's not the motor or hydrylics i have already checked those out. so that leaves the button or the...


"my daughters 1998 vw cabrio has a top that won\'t go up or down. i need to find the fuse for it. i know it\'s not the motor or hydrylics i have already checked those out. so that leaves the button or the fuse... but i don\'t have a diagram for the fuse box. Please help. "

Here's the list and link for the fuse locations.

Fuse/Relay Locations on 1996 VW Cabrio.

Fuses, left to right:
1. Head light, low beam, left
2. Head light, low beam, right
3. Instrument & License plate lights
4. Glove box light
5. Wiper/washer
6. Fresh air fan
7. Tail light & side marker, right
8. Tail light & side marker, left
9. Rear window defogger
10. Fog lights
11. High beam & indicator, left
12. High beam, right
13. Horn
14. Backup lights
15. Open
16. Dash warning lights
17. Emergency flasher & turn signals
18. Fuel pump
19. Radiator fan & AC
20. Brake lights & cruise control
21. Interior lights & digital clock
22. Radio & cigarette lighter

Relays

1. AC
2. Rear window wiper
3. Digilant control unit
4. Load Reduction
5. Open
6. Emergency flasher
7. Fog lights
8. Intermittent wiper
9. Seat belt warning
10. Open
11. Horn
12. Fuel pump
13. Radiator cooling fan
14. Starting interlock
15. Open
16. Open
17. Open
18. Daytime running lights
19. Auto trans
20. Open
21. AC & power seats
22. Power windows
Google Image Result for http://www.2carpros.com/forum/automotive_pictures/266999_cab_1.jpg

Aug 23, 2010 | 1998 Volkswagen Cabrio

1 Answer

Need a fuse box diagram for a 1998 jetta


heres a diagram of the fuse box and i listed the fuses numbered 1-22,hope this helps.
1)low beam light left
2)low beam right
3)park lights.
4)reawiper/washer
5)front wiper
6)blower motor/ac
7)tail light right
8)tail light left
9)rear defogger
10)fog lights
11)high beam Left
12)highbeam rt
13)horn
14)backup lights
15engine electronics
16)sunroof/frt map/reading light
17)hazard lights
18)fuelpump /o2 sensors /control module
19)cooling fan, ac relay
20)brake lights
21)inside lights,clock,luggage light
22)lighter,radio, trunk release843f4eb.gif6f30923.gif

Mar 03, 2010 | 1998 Volkswagen Jetta

1 Answer

1993 toyota corolla head & tail lights


did you check the bulb,relay or fuse for low beam

Jun 04, 2009 | 1996 Toyota Corolla

1 Answer

Electrical problem after battery replacement.


Below is a listing of which fuse corresponds with which circuit:

1 - 10 Amp - Transmission Controller, Gauges, Autostick
2 - 10 Amp - Right High Beam Headlight
3 - 10 Amp - Left High Beam Headlight
4 - 10 Amp - Radio, CD Player
5 - 10 Amp - Washer Motor
6 - 15 Amp - Power Outlet
7 - 20 Amp - Tail, License, Parking, Illumination Lights, Instrument Cluster
8 - 10 Amp - Airbag
9 - 10 Amp - Turn Signal Lights, Turn Signal/Hazard Indicator
10 - 15 Amp - Right Low Beam
11 - 20 Amp - High Beam Relay, High Beam Indicator, High Beam Switch
12 - 15 Amp - Left Low Beam Headlight
13 - 10 Amp - Fuel Pump Relay, Power Train Control Module
14 - 10 Amp - Cluster, Day/Night Mirror,Sunroof, Overhead Console, Garage Door Opener, Body Control Module
15 - 10 Amp - Daytime Running Light Module (Canada)
16 - 20 Amp - Fog Light Indicator
17 - 10 Amp - ABS Control, Back Up Lights, Daytime Running Lights, A/C Heater Control Cavity Fuse Circuits
18 - 20 Amp - Power Amplifier, Horn
19 - 15 Amp - Overhead Console, Garage Door Opener, Trunk, Overhead, Rear Reading, and Visor Vanity Lights, Trunk Release Solenoid, Power Mirrors, Power Door Locks, Body Control Module, Aspirator Motor
20 - 20 Amp - Brake Lights
21 - 10 Amp - Leak Detection Pump, Low Rad Relay, High Rad Relay, A/C Clutch Relay
22 - 10 Amp - Airbag
23 - 30 Amp - Blower Motor, ATC Power Module
24 - 20 Amp - Power Window Motors
25 - 20 Amp - Power Door Lock Motors, Power Seats

Apr 04, 2009 | 2002 Dodge Intrepid

1 Answer

Main fuses for the horn and air bag


Fuse #8, #18 and #22.

Below is a listing of which fuse corresponds with which circuit:

1 - 10 Amp - Transmission Controller, Gauges, Autostick
2 - 10 Amp - Right High Beam Headlight
3 - 10 Amp - Left High Beam Headlight
4 - 10 Amp - Radio, CD Player
5 - 10 Amp - Washer Motor
6 - 15 Amp - Power Outlet
7 - 20 Amp - Tail, License, Parking, Illumination Lights, Instrument Cluster
8 - 10 Amp - Airbag
9 - 10 Amp - Turn Signal Lights, Turn Signal/Hazard Indicator
10 - 15 Amp - Right Low Beam
11 - 20 Amp - High Beam Relay, High Beam Indicator, High Beam Switch
12 - 15 Amp - Left Low Beam Headlight
13 - 10 Amp - Fuel Pump Relay, Power Train Control Module
14 - 10 Amp - Cluster, Day/Night Mirror,Sunroof, Overhead Console, Garage Door Opener, Body Control Module
15 - 10 Amp - Daytime Running Light Module (Canada)
16 - 20 Amp - Fog Light Indicator
17 - 10 Amp - ABS Control, Back Up Lights, Daytime Running Lights, A/C Heater Control Cavity Fuse Circuits
18 - 20 Amp - Power Amplifier, Horn
19 - 15 Amp - Overhead Console, Garage Door Opener, Trunk, Overhead, Rear Reading, and Visor Vanity Lights, Trunk Release Solenoid, Power Mirrors, Power Door Locks, Body Control Module, Aspirator Motor
20 - 20 Amp - Brake Lights
21 - 10 Amp - Leak Detection Pump, Low Rad Relay, High Rad Relay, A/C Clutch Relay
22 - 10 Amp - Airbag
23 - 30 Amp - Blower Motor, ATC Power Module
24 - 20 Amp - Power Window Motors
25 - 20 Amp - Power Door Lock Motors, Power Seats

Apr 02, 2009 | 2004 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...