Question about 1997 Chevrolet Cavalier

2 Answers

97 chevy cavalier keeps blowing f/p-inj fuse. take to sharp a left turn and blam fuse gone... i dont see any peeled wires... but maybe im looking in the wrong place...what am i should i be looking for?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,098 Answers

Hi

the problem sounds like either the fuel relay, or wire4s coming from the fuel pump to the fuse box.

the relay is most probable as when you turn the electro magnet inside may sway from side to side if faulty. You will have to locate the position of the fuel pump and trace the wires up to the fuse box if the relay is not at fault.

Hope this helps if you need more info get back to me

Regards

Dan

Posted on Jan 01, 2011

Testimonial: "thankyou!! now i just need to locate the fuel pump relay..."

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

If the fuse consistently blows when making left turns you most likely have a wire somewhere ground that fuse circuit. Check the interior Fuse box locations. If you have added an alarm package, changed the Radio or Stereo amplifier circuit to the vehicle those are the most likely source of your short. You should also check the power distribution box under the hood if you have added an Alarm or Stereo amplifier to the vehicle as it is common to tap power circuits in that area as well.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dome light fuse blows instantly 97 cavalier


remove bulb and insert fuse if blows test circuit -check switch-dome - wiring and connections if doesnt blow check dome unit wiring and connections

Sep 11, 2016 | 1997 Chevrolet Cavalier

1 Answer

97 chevy suburban missfire cylinder #3 at start up


If you replaced the plug, wire and cap then it's either gona be the intake gasket seeping or a bad valve. Gasket more than likely I'd say bc the vortec motors are really bad about leaking or blowing the lower intake gaskets

Feb 20, 2015 | 1997 Chevrolet Suburban

1 Answer

Blinkers dont work


Did you replace the flasher?

Jul 31, 2017 | 1994 Chevrolet Cavalier

1 Answer

2002 chevy 1500hd po200 and po300 codes


Sounds like there is a short somewhere. Try looking for chewed wires

Nov 10, 2013 | Chevrolet Chevy Cars & Trucks

1 Answer

2003 chevy silverado injector 2 fuse blows when ignition is turned on


You ohmed them but did you check them for continuity to GROUND, to find out if one of them is grounded out ! They normally ground to ecm/pcm not to eng. so check them for short to grd with wire harness unplugged from all injectors and check 1 at a time, If they all show open...no ground then check your power should be pink for chafing or bare short to ground. this will be on Bank 2 you are checking which is the Head that setsfarthest back to firewall. Bank 1 is Head farthest to front towards Radiator.

Dec 26, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

I have a fuse that keeps blowing and the white letters are gone so i dont know what it goes to


you have some componet that has melted down contacts (it's hotwire is grounded) so every-time u turn on the key power is fed to direct short and the fuse blows.So look around at things that dont work.after fuse blows does motor still operate,keep it running and find out what doesnt work then check that component for melted,grounded wires...

Dec 27, 2011 | Cars & Trucks

2 Answers

Wiring hookup on starter chevy cavalier


i have a 97 cavalier and i have 5 wires that connect to the starter but i dont know where 1 of them goes

Mar 11, 2010 | 2001 Chevrolet Cavalier

1 Answer

97 chevy cavalier top of convertible latch is loose


IF I,M UNDERSTANDING THIS RT., THE LATCH IS LOOSE BECAUSE OF PLAY WITH THE RUBBER ALMOST GONE? WHT U CAN TRY IS A TYPE OF STICK ON FOAM. SOMIETHING LIKE THE RUBBER MOLDING AROUND UR DOORS.......CANADIAN TIRE SELLS DIFFERENT TYPES OF MATERIALS LIKE THAT.....OR OTHER CAR PARTS STORES IN UR AREA ,WHEREVER U MAY BE,,, REMOVE WT,S LEFT IN THAT CORNOR& CUT & SHAPE THE MATERIAL .....GD LK, CHARLIE

Mar 05, 2010 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
1997 Chevrolet Cavalier Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...