Question about 2005 Dodge Neon
If it cranks good but won't start, Have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse. Check for applicable trouble codes. You need an obd2 code reader to check codes, yourself. Hopefully the code reader will check manufacturer specific codes as well as po codes.
At the ignition coil and fuel injectors, dark green wire with orange tracer should be hot with engine cranking, use a test light to check voltage. If no voltage, that leads back to asd relay. I'm not saying the relay is faulty. The computer has to see both the cam and crank sensor signals before it will ground the asd relay, if either one of those sensors is faulty, the vehicle won't start. Just my opinion.
Posted on Mar 12, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I just emailed this to someone else, it might be your problem. Also, what I didn't mention to this guy, is the recall also states that a fuel line somewhere up there can crack too. Look it up to see exactly what I'm trying to say, just get on google and it will pop up.
A factory recall put out in AUG 98. The seals on the fuel lines up on the top of the motor wear out and when the engine is hot they expand and then leak fuel when the engine starts to cool off, you don't get the correct fuel pressure to the injectors, and you have to flood it to get it to start or let it sit longer. Just go down to your local Dodge dealership and they will fix it for free, I'm getting mine done Monday, my car is a 95 with 166k, and it won't cost me anything. Google recalls on 96 dodge intrepids with the 3.5 L if you don't believe me.
Posted on Nov 20, 2008
11= Timing belt skipped 1 tooth or more from initial learned value, Intermittent loss of either camshaft or crankshaft position sensor, No crank reference signal detected during engine cranking for dodge odb readout. Hope this helps.
Posted on Dec 08, 2008
Check the thermostat, and clean or replace the idle air control valve, replace the ball joints, replace the plugs and plug wiresthis should correct the problem.
Posted on Jun 27, 2009
The codes listed all point to the transmission being in bad shape or some wiring got crossed. Check with a trans shop for an estimate.
Posted on Jul 18, 2009
Tips for a great answer:
Jan 06, 2016 | 2003 Dodge Neon
Sep 07, 2014 | 2005 Dodge Neon SXT
Aug 04, 2014 | 2005 Dodge Neon SXT
Nov 10, 2013 | 2005 Dodge Neon SXT
Feb 02, 2013 | 2005 Dodge Neon
Nov 26, 2017 | 2005 Dodge Neon SXT
Aug 07, 2010 | 2005 Dodge Neon
Nov 17, 2009 | 2005 Dodge Neon
Jul 18, 2009 | Dodge Neon Cars & Trucks
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: