Question about 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

My 300 got stuck in the snow. After much spinning and gear changing my check engine light, abs light, and esp light are all staying on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

More than likely you caked up a wheel speed sensor (or several of them) with snow, ice, mud, etc. An improper or no reading at even one wheel can cause all of these symptoms at once.

You could wash the vehicle well then put it in a heated garage and see if that helps.

Otherwise some disassembly and cleaning may be needed or you could have a wet, shorted or bad sensor harness. A dealer can connect a diagnostic device which will indicate which wheel(s) are not sending a proper signal.

Best wishes.

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ABS + ESP lights staying on dashboard


wow no year car, now that is a challenge , no?
abs is first.
first- first are brakes.
abs stuck on key on and running full time right?
so check brakes for damage or worn out.
brake fluid level not falling? look yet? look when checking oil every time.
abs can not work on cars with bad brakes, (its not god like)
then check for ABS sensor damage and its wires. under car.
then scan the ABS. got errors, sure you do.
but what? you didnt scan it first.
or read the manual> RTM?
its only 4 bucks to read it.

posted over 200 times, this.
https://suzukipitstopplus.com/Category/3-suzuki-service-manuals.aspx

answer year and read.

Mar 14, 2016 | Suzuki Grand Vitara Cars & Trucks

1 Answer

What causes I/P lights to blink when put in gear?


2005 Chrysler 300 2.7l Throttle Body Control Warning Light ...

www.cargurus.com > Questions > Chrysler > 300

CarGurusAug 7, 2014 - 2005 Chrysler 300 2.7L throttle body Control warning light or "RED ...bolt starts flashing and the car gets stuck in limp mode or second gear.Missing: p

PCM/TCM Software Updates Will Address Shifting Problems ...

repairpal.com > Problems > Chrysler > 300
Chrysler 300 PCM/TCM Software Updates Will Address Shifting Problems. ... If you experience rough shift and/or shuddering during gear shifting, software ... Car would not go over 20 mph and check engine light along with ABS/BAP light ... Once he put the new battery in the car ran fine for a while and the problems all cam ...Missing: p

ECM with bad connection, causing engine to stall - 2005 ...

? 1:08
https://www.youtube.com/watch?v=IgLe0t5may8
Oct 23, 2011 - Uploaded by SignedOnAsJoe
Check NHTSA chrysler extended the warranty on fuel tanks. ...Any one knows how can I put a used ecm in my 2005 300 do I need to buy new ... How to view fault codes Chyrsler 300 HTWL - Duration: 1:22. by Leo P 28,908 views ... Rough Run, Stumble or Stall, Check Engine Light-How To Check Vehicle ...Missing: blink

Dec 19, 2015 | 2005 Chrysler 300 Touring

1 Answer

I have a 2000 Mercedes E430 base sedan. Last week I replaced the brake light switch because it was out and it solved the problem to the point that I can now put my car into gear and drive it, however, as...


Brake light switch problem may cause the ESP / BAS lights to illuminate.

Common symptoms of a bad
Mercedes brake light switch.
  • Car stuck in Park.
  • ABS ESP ETS lights come on.
  • Can not move the shifter from Park to Drive.
  • Brakes Defective Warning on Instrument Cluster
  • Car won't shift gears. Stuck in 2nd gear, limp mode.
  • Brake lights don't work. (Brake light switch can still be defective even if the brake lights work. Checking the brake light operation is not a good test.)
  • ESP, BAS, ABS lights turn on. Car won't shift properly. Stuck in gear.


TEST: To test your new brake light switch: Turn you car off to reset the ABS light. apply the parking brake. and start the car in neutral or park without using the brake. if the problem is the brake light switch... the light will only come on when you press the brake pedal.

If you replaced the brake light switch and the light is still on you should check a few other things such as:

  • Fuses and Relays
  • ABS pump
  • ABS wheel speed sensor
  • Brake Fluid Level
  • Get an advanced scanner to read trouble codes.


NOTE: ** You may need a MBZ scan tool to reset the error code which was stored in the ECU because of the bad brake light switch.

Feb 25, 2015 | 2000 Mercedes-Benz E-Class

1 Answer

Have a vw touareg 2005, esp light stays on and car


The light is telling you that there is a problem in the engine management system. Have the fault codes read and fix the faulty sensor/servo

Aug 31, 2013 | 2005 Volkswagen Touareg

1 Answer

Gear shift stays in park and abs esp and asr lights on


1) try to use the self diagnose.
2) place ignition swtuch in the start position, the lights coming on
3) engine starts, the brake light sould turn off inmediately. the ABS ligth will illuminate for aprox 6 seconds.
4) test drive the vehicle at speed above 20mph for a few minutes. during the test the both test lights should remain off, if any one of the warninign light utron, take note of the condition.
5) stop the vechicle using the braking pressure.both light should remain offf during the stopping procedure.
60 place the gear selector in to PARK, and observe the warning lights, they should both be off.
God bless you

Jul 09, 2012 | Cars & Trucks

1 Answer

Abs esp


ABS (GERMAN SYSTEM DESIGNED BY BOSCH)anti blocking system,stops wheels from locking up when braking hard(in europe you switch it off in snow....switch fitted)
ESP(as above)electronic stability program,uses the abs system to stop the wheels from spinning for max grip.
to test abs,stand on brakes hard,if wheels lock, it aint working .dashlight on.
esp,park with 2 wheels on grass and 2 on tarmac, floor gas.no spin.

Jul 10, 2010 | 2007 Jeep Liberty Sport

1 Answer

I have a 2008 pontiac g5 abs light is on after snow storm but traction control light is not on . still stuck in driveway what should i do


If you are still stuck in the driveway, that's why the ABS light is still on. Get a snow shovel and dig the car out. Once you get the car on the road and all the wheels are turning the same speed the ABS light will most likely go off. It doesn't hurt anything to drive the car with the ABS light on. What that light is telling you is, the "Antilock Brake System" (ABS) is not working. The brakes will still work but, the antilock portion will not, so when you hit a icy patch, the wheels can lock during braking. The ABS senses the speed of all the wheels and if you have been spinning the wheel in the snow, it throws the system out of sychronization. Once you get out of the snow and you start to drive the light will go off, if the system is in working order. The light should go off in a block or two, if not stop the car shut the engine off and restart it. Try it again and see if the goes off, if not there's a problem with the system, get it to a shop.

Feb 07, 2010 | 2007 Pontiac G5 Gt Coupe

1 Answer

Fit new indicator stalk to VW passat esp , abs light on now


the stalk should have no interference with the abs or esp set up what i would look at doing is checking your abs sensors they can go all of a flash...goodluck

Jun 19, 2009 | 2004 Volkswagen Passat

4 Answers

ABS, ESP, Level warning lights (2004 Allroad TDI)


I had the brake light switch replaced by a local dealer. Cost was $140 and it fixed the problem. Have driven the car for two weeks since and no lights and all systems normal.

May 22, 2008 | 2004 Audi allroad

Not finding what you are looking for?
2007 Chrysler 300c AWD Sedan New Cars Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...