Question about 1999 Ford Contour

Open Question

Starter wont disengage after starting car - 1999 Ford Contour

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
skychief2001
  • 21873 Answers

SOURCE: starter engages but wont disengage when started

You'll need to figure out if it is an electrical problem or something hanging up in the bell housing.
You can leave off the wire from the key and try it to see if something is powering the solenoid after you release the key switch. If your model has the solenoid on the fender it could be sticking.

Posted on Aug 19, 2012

Ad
  • 5366 Answers

SOURCE: replaced starter and sylinoid in my 1989 f250 still wont start

If the old solenoid had a bad short it may have put your new starter out of commission. Have the starter tested-it should still have warranty for repllacement.

Posted on Nov 25, 2012

  • 513 Answers

SOURCE: replaced starter and sylinoid in my 1989 f250 still wont start

HAVE YOU CHECKED BATTTERY VOLTAGE AND CONNECTIONS? LOW VOLTAGE WILL CAUSE A SOLENOID TO STICK AND NOT RELEASE. . MIGHT BE WORTH CHECKING.

Posted on Jan 20, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

STARTER WONT STOP TURNING


Year make and model. Ignition switch most probable cause.

Jul 23, 2016 | Cars & Trucks

1 Answer

Starter disengage


The teeth on the flywheel or starter drive could be damaged enough to cause sticking and it does not release. Another reason could be the clearance between teeth on the flywheel and starter drive are too tight. The starter would need more metal tabs or spacers to increase the clearance distance between the teeth on each one.

Mar 16, 2014 | Pontiac Sunfire Cars & Trucks

1 Answer

Starter won t disengage


replace starter solinoid before u catch ur car or fire

Feb 20, 2014 | 1991 Oldsmobile Cutlass Calais

1 Answer

Starter will not disengage after


It sounds like the "bendix drive" is gone in your starter. This is the assembly that engages and disengages the starter to the engine. The only way to fix the problem is to replace the starter. Hope this helps.

Jul 03, 2013 | Mitsubishi Montero Sport Cars & Trucks

3 Answers

Replaced starter and sylinoid in my 1989 f250 still wont start


If the old solenoid had a bad short it may have put your new starter out of commission. Have the starter tested-it should still have warranty for repllacement.

Nov 25, 2012 | 1989 Ford F 250

2 Answers

Starter engages but wont disengage when started


You'll need to figure out if it is an electrical problem or something hanging up in the bell housing.
You can leave off the wire from the key and try it to see if something is powering the solenoid after you release the key switch. If your model has the solenoid on the fender it could be sticking.

Aug 19, 2012 | 1992 Ford Tempo

1 Answer

I have a 1997 chevy cavalier with a 2.2 liter 4 cyl. starter wont disengage tried to new starters and relay and its still does it. It worked fine before i had to replace the starter.


disconnect the s terminal on the starter and connect the battery, if the starter engages then its the starter, if it doesnt check the voltage on the small wire it should be dead unless the key is in the start pos

Nov 06, 2010 | 1997 Chevrolet Cavalier

1 Answer

Ford starter won't disengage even after the ignition is switched


sounds like to me that the ignition is bad and sticking on the start positon

Jan 04, 2009 | 1985 Ford Mustang

Not finding what you are looking for?
1999 Ford Contour Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...