Question about 1992 Chevrolet K1500

1 Answer

I want to know were the module and the ingition coil on the m,otor

Posted by on

  • Mustang_Guru
    Mustang_Guru Jan 01, 2011

    Pickup or Suburban? Which engine: 4.3 V6, 5.0L V8, 5.7L V8 or 6.2L Diesel?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,102 Answers

The ignition module is bolted to the distributor, underneath the cap. It has two wiring harness' attached to it. The coil is mounted off to the side. I thnk it's on the passenger side. It too will have two wiring harness' attached and one large "spark plug" wire from it to the distributor cap.

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a ingition module


this is a component that distributes power in the coil/distributer system , each vehicle manufacturer will no doubt use a different configeration some or integrated into the coil packs others ( older cars ) in the distributer , is this just a general enquiry ?, if you need a more specific answer then will need to know vehicle model , age etc

Nov 21, 2014 | Cars & Trucks

2 Answers

96 sierra 4x4 5.7, no spark, no fuel, only have .4 volts at ingition module, coil, and 10A ign fuse. Door locks don't engage when turn key,


Something wrong in the fuse box if you only have .4 volts at the fuse. Maybe a loose terminal in there.

Aug 04, 2017 | 1996 GMC Sierra

1 Answer

Car wont start no spark at plugs


if distributor model check coil feed to distributot for spark this is done by grounding the coil wire. if coil module feed then check power to coil module if no power then your problem is outside the engine area in the ingition or fuses ect many possibilities

Oct 20, 2012 | 1990 Toyota Camry

1 Answer

1984 ford bronco full size, 351 engine, has new module, distributor, cap, rotor button and anythng to do with making it fire, yet it still will not fire, i have voltage at module and coil, also has new...


The olny thing left is the ingition switch .When you turn the key do you have power i don't know it sounds like you did everything right mabey a bad ground wire i have seen that happen on fords from that year the main ground to the engine looks fine on the out side the jacket is fine but the wire is green and all rotted out inside try jumping the mian ground wire good luck

Feb 13, 2011 | Ford Bronco Cars & Trucks

1 Answer

Want to know where my module and ingition coil located


The coil is right beside the distributor cap (follow center wire on cap,goes to coil) and the module is inside the housing of the distributor cap(remove the cap with torx screws.)

Jan 01, 2011 | 1992 Chevrolet K1500

1 Answer

Were do i find the module and the ingition coil on a 1992 chevy truck vortec motor


module is under the distributor cap, bolted to the plate that the cap bolts to. It will have two wiring harness' attached to it. The coil is off to the side on the passenger side If I remember right and it too has two wiring harness' attached and one "spark plug" wire from it to the distributor cap.

Jan 01, 2011 | 1992 Chevrolet K1500

1 Answer

1992 hyundai auto, have replaced starter module, and ingition coil,however still have no spark,


Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Sep 23, 2009 | 1992 Hyundai Excel

Not finding what you are looking for?
1992 Chevrolet K1500 Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...