Question about 1994 Saturn Sc

1 Answer

I dont know where the retaining clip is on my 94 saturn window handle

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

It is underneath the base of the handle, snapped onto the post coming from the regulator. there is a special tool sold at body parts stores to spread the clip and push it backwards to free it from the post. an old dishrag swished from side to side under the arm, against the base will do the same trick. the clip will go flying so do not do this in the grass

Posted on Jan 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I whant to remove the windo handle


To remove window crank handle,

pull the handle toward you exposing the

window crank handle retaining clip on the

back side of the window crank handle. Using

your trim panel removal tool, apply pressure

to the window crank handle retaining clip to
remove the crank handle.

Aug 09, 2012 | 2003 Kia Spectra

1 Answer

Remove the interor of the door


To remove window crank handle,

pull the handle toward you exposing the

window crank handle retaining clip on the

back side of the window crank handle. Using

your trim panel removal tool, apply pressure

to the window crank handle retaining clip to
remove the crank handle.

Aug 09, 2012 | 2005 Kia Spectra

1 Answer

How to remove front door handles or window on ford tranit van model 1997


ou need to slip the flat side of the handle removal tool just behind where the handle meets the door panel so the flat side is against the door panel. Be careful not to tear or scratch any panel materials!

  • 2 Once the tool is in place, turn the window handle a little bit at a time in both directions while simultaneously putting downward pressure toward the handle with the tool until the "C" clip retainer gets caught and is pushed out of it's slot. This retainer may jump away so you want to keep a close eye out.
    This process is more of a manipulation which may take a few moments until the tool catches the clip since you can't see back there. A little patience here and don't force anything!
  • 3 install-car-window-crank-handles-1.3-800x800.jpg Typical window crank handles. Notice where the the "C" clip is located. Once the retaining clip has been removed you should be able to pull the handle straight off of the gear it is on. It may take a little force and you should only work it off from the attachment area and not from the arm of the handle.
  • 4 To reinstall the handle you will need to set the retaining clip just over the stem part of the window handle that will fit back over the gear. You will see the slot the "C" retainer clip will fit over. Press the clip "partially" over the slot, so that when you press forward, once the handle is on the gear, with your tool it will snap forward and set into the groove which will lock it in.
    .
  • 5 Once the handle is in place with your "C" retainer in place, slip the same removal tool behind the handle and between the door panel and push forward as you gently turn the handle until the "C" clip catches and slips over the entire handle locking itself down. It may take a few tries and a little patience.
  • 6 Once you feel the clip catch, you can test to be sure it is in correctly by trying to pull the handle off from the attachment area, where it is attached to the gear, not at the handles end. If the clip has truly caught, it will not pull off.
  • Oct 05, 2011 | Ford Cars & Trucks

    1 Answer

    The driver side power window is stuck open about 4 inches. I'm having difficulty getting thhe door panel off. How do I disconnect the door handle?


    remove the screw holding the handle.If you look behind you will see 2 rods. One is for the handle and the other is for the lock.Use a flathead and flip the plastic clips in order to remove the rods from the handle.The door panel will need to be lifted up to remove after removing and retaining clips/screws

    Aug 04, 2011 | 1998 Saturn SL

    1 Answer

    How to open the door frame of a 94 Saturn SL1, my window is off track and am trying to fix it but cant seem to get the door apart all the way


    Start by removing the front door rear view mirror interior cosmetic piece.
    Remove the 3 large nuts holding the mirror on and take it off the car.
    Lift the door handle up and push the two small handle retaining pins out, take off the door handle. Unscrew all the bolts holding the door panel onto the frame, special driver needed. Lift the door panel up and away from the door. Reinstall in reverse order. If you are doing a back door, omit the mirror part.

    Jul 20, 2010 | 1994 Saturn Sl

    1 Answer

    Anywhere to find a breakdown to change the door handle that broke off on a 94 pathfinder?


    Very easy to do...I have a 1990 and they are interchangeable....88-94: Door Panel
    1. Fully lower the door glass.
    2. Remove the arm rest, door lock knob and inside door handle escutcheon.
    3. For vehicles with manual windows, remove the regulator handle which is retained by a spring clip.
    4. Gently pry the door panel away from the door.
    57cc694.gif
    Interior side and floor trim removal procedures-Pathfinder

    4c380d2.gif
    Remove the lock button first before removing the door panel

    e5a8f97.gif
    Remove the plug to gain access to door panel retaining screws

    54604ec.gif
    Remove the trim cover

    eec4f16.gif
    Remove the door handle trim

    09f640c.gif
    Remove the power window switch trim panel

    44a5e00.gif
    After loosening the power window switch trim panel, disengage the electrical connection

    530cf7c.gif
    Remove all the necessary trim panels before removing the door panel clips

    791f0b4.gif
    View of the door panel retaining clip-clip must be installed in the hole straight

    690538f.gif
    Make sure the watershield plastic is in place before installing the door panel

    Installation is the reverse of removal.

    Dec 10, 2009 | Nissan Pathfinder Cars & Trucks

    1 Answer

    How do I fix the dirver side door handle on my 1994 Saturn. When I went to open the door, I heard something break in the handle and fall to the bottom on the inside of the door. The handle is now very...


    On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you should see what fell down...

    Oct 20, 2009 | 1994 Saturn Sc

    1 Answer

    94 LeSabre inner door panel removal


    On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

    Apr 22, 2009 | 1994 Buick LeSabre

    1 Answer

    REPLACEMENT PROCEDURE FOR HEATER CORE ON A 2001 SATURN L 300


    i dont know where emissionwiz gets his information. go to pass side and remove lower kickpanel on center console. remove black plastic clips on heater core lines. remove the phillip head screw on retaining clip and slide out heater core. all this after draining coolant. should take about 20 min.

    Apr 04, 2009 | 2001 Saturn L-Series

    1 Answer

    Remove outside door handle on 1994 saturn sl1


    lift up the door handle and look on the bottom side of the handle, you should see a small black retainer on one side, use something small to push in the canter and a small flat bladed screwdriver to remove retainer. then slide the handle to the front or to the rear to remove.

    Mar 25, 2009 | 1994 Saturn Sl

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    27 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    yadayada
    yadayada

    Level 3 Expert

    75744 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8123 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...