Question about 2010 Hyundai Accent

1 Answer

I bough yesterday new i 10 n today get little paint damage due to collusion, how to fix paint damage

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

My best solution i can provide with out seeing the damage you might consider a collision shop or dealership collision center for best and professional repair. This type of repair is a very hard task it takes years to prefect not really knowing how and most of all the proper equipment required.I hope my solution was suitable for you.

Posted on Jan 01, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On my 1995 Pontiac Grand Prix SE I have replaced the ignition wires yesterday and today and they keep shorting out after driving around. I tested the resistance of and know that they are what is bad.

if you have a vibration in the wiring and the cable is damaged it will connect to the shell. check the rubber grommets around the vehicle and make sure none of them are damaged. also if you have pulled any wires and they are clipped in place you could of cut the case of them.

May 28, 2017 | Pontiac Cars & Trucks

1 Answer

The clear is peeling on the paint on my explorer sport truck 2004 How can I fixed

The damaged clear has to be gently sanded off, the paint layer repaired if necessary and a new coat of clear sprayed on. Thus is not a diy job if you have no experience with paint and body work. It will require some specialized tools and knowledge. The tools and supplies will probably cost you near what a shop will charge to fix it.

Aug 14, 2016 | Cars & Trucks

1 Answer

Battery drained

what else is switched on.could be a bush that is clamping the starter drive gear.also could be a damaged wire to the starter

Jul 10, 2012 | 2000 Chevrolet Lumina

2 Answers

Sealed radiator on top - radiator hose has blown off twice - not overheating HELP

aluminum radiator
plastic top and base seal
tanks held in with crimps on aluminum radiator

find a local radiator shop to replace top seal and top plastic part
of that radiator
not as expensive as a new radiator

replace the thermostat

pressure is too much on that crack for any diy repair product

pop off hose at the wrong time =cook the motor


Apr 29, 2017 | 1996 Isuzu Trooper

1 Answer

I have an 85 Ford F150 with a 302 FI. I am replacing the valve cover gaskets in it. I tore down and rebuilt yesterday. Leaking more now than when I started. Will be tearing down and rebuilding again...

usually due to overtightening the bolts and distorting the rocker cover flkange. Torque is very low. straighten flange and use a gasket sealer on each side of gasket and do not tighten more than 10 ft lbs.

Oct 23, 2010 | 1985 Ford F150

1 Answer

I have a 2010 Nissan Maxima I just noticed today that the hood and some spots on the entire vehicle the paint is bubbling up like little pimples of some sort. What should I do I purchased it new 3/2010....

Make sure it's not something from the trees (sump , grease etc..) , and if it's a paint defect take it back to the dealer , you have warranty on that one.

Jun 24, 2010 | Cars & Trucks

1 Answer

My wife backed into the garage and knocked the passenger side mirror off. Does anyone know how I can fix it? It looks like some of the little knobs that latch it broke.

If there is no damage to the door itself the mirror replacement is fairly easy on this model. Remove the inside plastic trim panel,it just snaps on. Disconnect the electrical connector remove the bolt in the center and there will be a screw toward the front of the door,remove it then remove the mirror.
Here is a pic of the bolt and screw.

If it has a painted cover on the outside of the mirror to match the color of the vehicle then that would have to be painted to match unless your old one did not suffer any damage then you could just swap it.It just snaps on also, and it may or may not come with a new mirror so I would ask when ordering it.

Mar 10, 2009 | 2005 Ford Focus

1 Answer

Mazda MPV minivan 2002 "shaking"?

I suspect the chassis was damaged by the tree falling. Take it to a Mazda main agent for assessment.

Mar 11, 2017 | 2002 Mazda MPV

Not finding what you are looking for?
2010 Hyundai Accent Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides