Question about Audi A6

1 Answer

Timing spec and bolt torx spec for 1996 audi a6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 360 Answers

Best bet is to purchase a vehicle specific repair manual from your local auto parts store (Pep Boys, Advance, Auto Zone, O'Reilly's, etc.)

The book will contain all of the info you've inquired about.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audi a6 2 ltr petrol timing marks and torque


ally head 75lbs ,timing marks i honestly cannot remember ,do it old fashioned way time it to no1 with valves closed on no1 then you can see where or what the pmarks should be ,do not use starter motor ,always crank engine by hand 360? to ensure valves clear

Dec 21, 2010 | 1995 Audi A6

1 Answer

My 1996 audi A6 has an oil sending unit problem...can you tell me what that might take to fix and why would this show leaking oil? I thought this part was inside the oil pan?


The oil pressure sender unit is located on the oil filter housing.These do tend to leak at times. The warning light for this switch is a red oil can and a buzzer. Replace the switch. If warning light still comes on, have the oil pressure checked. The oil level sender warning light is an orange oil can with oil level under it. This sender is fitted on the bottom of the oil sump and can leak past the seal. If warning light comes on, check oil level. If ok, check for damage to wiring under vehicle. Senders do some times become faulty.

May 20, 2010 | 1996 Audi A6

1 Answer

How do you remove the sun shade on the sunroof of a 1996 Audi A4?


The sunroof assembly has to be removed from the car before the shade can be removed.

Start with the sunroof glass, put the glass in tilt mode and remove the plastic covers hiding the bolts. Mark the bolts with white out so they go back where they were, remove the 6 T25 torx bolts. Push the glass out from the top and remove the glass. This should allow you to remove the shade.

Apr 16, 2009 | 1996 Audi A4

1 Answer

Heat and a/c problem 1996 audi a6 2.8


my audi a6 2.8 i need radio cod

Apr 16, 2009 | 1996 Audi A6

1 Answer

Audi A6 Xenon headlamp bulb change - UK Offside





Headlights, Removing and Installing

Removing
  • Remove front bumper.
  • Remove both Torx bolts (T30) -1-.
  • Remove interior Torx bolt (T30) using 1/4"-Torx-bit insert and extension.
NOTE: If necessary, use magnet to remove bolt.

  • Disconnect multi-function harness connectors for headlights.
  • Turn headlights -2- toward center of vehicle and remove from chassis toward front.
Installing
Installation is reverse of removal, noting the following:


  • Adjust dimension -a- via plastic bolt at new headlight.
NOTE: Determine dimension -a- at plastic bolt of old headlight, when being replaced
  • Engage headlight in area of center of vehicle in guide -2- via pin -1-.
  • Always align headlight according to contours of chassis (gap dimensions) and secure.
  • Adjust headlight after installing.
Tightening torque

Component Nm
Headlights to lock carrier 6



Repair Kit For Headlight Housing, Installing

NOTE:
  • Headlight mounting tabs that have broken off can be replaced by installing the repair kit. Complete replacement of the headlight is therefore not necessary.
  • Different repair sets are available for the left and the right headlight.
  • Remove headlight with broken mounting tab.
    • Remove remains of the broken mounting tab -1- at location marked with the arrow.
    • Place mounting tab -2- of repair set onto the edge (arrow) of the headlight housing and secure the tab with two screws -3- from rear.

Feb 09, 2009 | 2004 Audi A6

1 Answer

How do i change the sump on my audi a6 2.8 quattro


Remove the large plastic body panel under the engine, if it is still there. The oil pan is about 14in x 12in square with a round sensor in the middle. Drain the oil, disconnect wires, remove all 20 or so bolts. Clean gaskek surface and silicon new gasket in place. replace the bolts, but only hand tight. Let the silicone set for 2 hours, and then tichten to factory spec, about 15in/lbs

Feb 03, 2009 | 1999 Audi A6

2 Answers

Audi a6 avant 1996 repair manual free


wonder land! ask for alice.

Jan 03, 2009 | 1996 Audi A6

1 Answer

1996 Audi A6 It's hard to start


Sounds like the timing is getting out of sync. Check the belt for worn teeth or loose ness.

Jan 03, 2009 | 1996 Audi A6

1 Answer

1995 audi a6


two bolts through middle(allen key)they are about halfway along you will see them if you look underneath near edges of number plate.....

Oct 26, 2008 | 2002 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...