Question about 1984 Ford F 250

Open Question

84 f-250 dash lights dont work. bulbs are good, fuse is good.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2001 v 70 volvo brake light

Hello. Check relay RMI5 in REM unit located in left side rear of cargo area. As you look at it it's to the right of the central electrical connector 5th from bottom. Matt

Posted on Oct 08, 2008

Ad
  • 24 Answers

SOURCE: 95 Nissan pathfinder, Head lights, brake lights

If its just the lights, then probably the headlight switch. If radio problem is related then possibly a bad ignition switch.

Posted on Jul 22, 2009

  • 1 Answer

SOURCE: my 2002 f150 dash board lights do not work. The

You might need a new cluster .... or it is p[ossible you installed a new stero in the vehichle and one of the wires that were not used from the harness to connect to the cd player may not have been wrapped and are causing a ground.

Posted on Aug 30, 2009

  • 70 Answers

SOURCE: 97 Ford E250 Running lights and dash lights not working

best bet is get a WIRING DIAGRAM. you should have current (12 volts) on both sides of the fuse that works the tailights.if not there is probably a broken wire or a shorted wire leading up to the fuse. you kinda need the wiring diagram so u can see in which order the current "flows" which will help point u in the right direction.

Posted on Sep 06, 2009

  • 65 Answers

SOURCE: my dash lights dont work on my 300zx but i dont

those cars are fun cars but the interior light adjustment switches go out all the time .mostly when you install new radio using wrong illumination wire..how ever i have seen the lighter illumination light cause havoc,along with improperly install extra lights.

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Backup lights dont work,bulbs and fuse are good


Check back up switch for proper operation and adjustment.

Jan 19, 2015 | Cars & Trucks

1 Answer

1990 buick regal dash lights dont work


locate and check the dimmer switch,if it is okay check the bulbs

Oct 12, 2012 | 1990 Buick Regal

1 Answer

Aveo 2007 dash light dont work dont find the fuse


there is a selector switch on the light to off,on with open doors, or on. make sure the switch is in the correct position, and the bulb is good. See owners manual for exact fuse location.

Mar 12, 2011 | 2007 Chevrolet Aveo Sedan

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges


If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

1 Answer

97 honda civic instrument panel lights do not work.


your bulbs are burnt out in the dash. You will need to replace them. when your fuse went out it was either that or your bulbs and your fuse went out. Now that you have a new fuse your bulb was the weaker link so that went out. hope this helps

Sep 19, 2009 | 2001 Honda Accord

3 Answers

Dash lights and tail lights not working on my 1999 chevy malibu


Hi its rob here what make and model of car is it? it sounds like the light switch is faulty but that wouldnt stop the brake lights workin try two stop and tail light bulbs then if you have stop lights your switch is at fault

May 11, 2009 | 1999 Chevrolet Malibu

2 Answers

Tail lights dont work but bake and turn singals do


did you also check the fuses under the hood, there is a 20 amp out there that feeds that circuit.

Feb 02, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1996 isuzu rodeo problem


TO TROUBLE SHOOT ELECTRICAL YOU MIGHT NEED TO TRY A GOOD BULB OF CORRECT TYPE INTO SOCKET IN BRAKE FIXTURE THEN ALSO MAKE CERTAIN THE REGULAR TAIL LIGHT ELEMENT IS GOOD REPLACE FUSE WITHOUT PRESSING BRAKE LIGHTS ON IF FUSE IS OK THEN TURN ON THE RUNNING LIGHTS SEE IF THE ONE IN QUESTION IS COMING ON IF IT IS AND THE FUSE IS OK THEN PRESS BRAKE PEDAL AND SEE IF THE BULB LIGHTS WITH THE BRAKE ON ALSO THE FOUR WAY FLAHER IF FUSE IF STILL GOOD IT MIGHT ALLOW DASH LIGHTS TO COME ON MANY VEHICLES HAVE A SAFETY WAY OF LETTING YOU KNOW YOU HAVE NO TAIL LIGHTS BY ALSO TURNING OFF THE DASH LIGHTS.

Nov 09, 2008 | 1995 Isuzu Rodeo

2 Answers

95 jeep cherokee


Your problem is in te combination switch (the light switch that turns the lights on). Replace it and it should be happy again.

Jun 16, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...