Question about 1998 Ford Mustang

2 Answers

Need to bleed power stearing installed new pump and still get noise a quick how to would be good thanks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

Hello you will need to top up your power steering fluid once you have completed that you will need to turn your steering wheel with car running all the way to the left and all the way to the right be sure to keep the power steering pump cap off while your rotating your steering back and forth.You will need to keep repeating this all the way left then all the way to the right until that gurgling wind sound is gone and so will be all the air in your power steering.Once you have completed this don't forget to top up power steering fluid if necessary and be sure no t0o forget to put your filler cap back.You have now bleed your power steering

Posted on Jan 01, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 112 Answers

Make sure fluid is a little above max level
and bank steering wheel left and right
hold for a few seconds in the extreme positions
recheck the fluid level
take out excess if necessary

good luck

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to bleed power steering pump on 2004 dodge ram


TAKE CAP OFF STEARING PUMP FILL TO MAX LEVEL START ENGINE THEN TURN STEARING FROM LOCK TO LOCK IE ALLTHE WAY RIGHT THEN ALL THE WAY LEFT CHECK LEVEL OF FLUID TOP UP IF NEEDED THEN DO AGAIN REPEAT UNTILL POWER STEARING IS WORKING OR YOU FIND A LEAK REMEMBER KEEP FLUID AT MAX

Aug 12, 2012 | Dodge Ram 1500 Cars & Trucks

1 Answer

My car is making whinning high pitch sounds when im driving then it will stop and eventually come back, is it the power stearing pump or the power stearing hose leaking


You most likely have a leak. You shouldn't ever have to add power steering fluid. It is best to get it checked out and repaired while the leak is small. If you wait, the leak will get worse and the oil gets dumped on hoses, belts, wiring harnesses, computer sensors, etc. and can cause severe damage to all of these items, as well as rubber engine mounts and suspension parts. To properly maintain your vehicle, NO fluid leak should EVER be "tolerated". Fluid leaks (of all types) are the leading cause of sending cars to the scrap yard way before their time.

Feb 15, 2012 | 2000 Oldsmobile Alero

1 Answer

My uncle replaced the power steering pump in my 1998 Pontiac Grand Prix but I am still having a whining noise. What is the proper way to bleed the pump of air for a Grand Prix?


the power steering pump, you need to bleed out the rack, this is done by filling the power steering system then turning the wheel from left to right in quick repitions.

Apr 18, 2011 | 1998 Pontiac Grand Prix

1 Answer

Installed reman power steering pump. Pump is now quiet but power is now intermitent and at times very difficult to turn. I drove it quite a bit purposely making tight turns but still feels as though...


I am not real familiar with the pump you installed, but, It sounds like you are right on the money. There is air in the system. Does the paper work with the new pump give instructions for bleeding?
If not, and you need help with the bleeding, please repost question, " How do I bleed new Reman power steering pump on 05 Accord?", I will watch for it, and have some research at the ready.

Good luck!

Jan 29, 2011 | 2005 Honda Accord

2 Answers

2002 hyundai elantra power stearing pump replaced. Loud squeal and chatter when stearing left or right. HELP


was the p/s system bleed of air properly before running the new pump. wheels should be off the ground and the fluid reservoir full then wheels turned from left to right all the way and top of fluid as needed. then start engine and continue to cut left and right. fluid aeration will cause premature pump failure and noise. also ensure that no other parts are restricted, i have seen faulty valves in the rack or lines cause restrictions in the flow and cause the pump to fail even new ones. hope this will help you

Jan 28, 2010 | Hyundai Motor 2002 Elantra

2 Answers

Power stearing noise it grones as I am stearing.


it is possible that you might need to check the fluid level, if it is full the next step night be to have the system flushed out and replace the Power steering filter. Finally last would be to have the powr Str pump replaced, Good Luck!

Sep 13, 2009 | 2000 Dodge Caravan

1 Answer

Stearing


if the rack is leaking then the only option to repair it is to replace it with a remanufactured rack.the noise is probably the power steering pump because it is low on fluid.

Jul 30, 2009 | 2007 Buick Lucerne CXS Sedan

1 Answer

No power steering new installation


disconnect the return line at pump put it in a jug start the engine check for cirrulation and too bleed air keep filling pump if you have no cirrulation the reconnect the return hose and discnect the supply too see if it pumping if it is then you have a blockageif not then you may have a bad pump

Mar 04, 2009 | 1993 GMC Sierra K1500

1 Answer

How to change the power steering pump?


their is no trick. i have a 96 accord that the pump ran dry and went bad after an accident when i replaced it all i used was one 12oz bottle of lucas power stearing fluid and toped off with honda power stearing fluid.. if ur pump or rack and pinion are dry bleed the system befor running to avoid a dry start whitch could cause the new pump to go bad just pull the old pump and install new one . takes about .5 hours

Aug 07, 2008 | 1996 Honda Accord

Not finding what you are looking for?
1998 Ford Mustang Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...